These regulations balance the need to protect the public safety
and welfare, the need for a well-maintained and attractive community,
and the need for adequate identification, communication, and advertising.
The regulations for signs have the following specific objectives:
A.
To ensure that signs are designed, constructed, installed, and maintained
according to minimum standards to safeguard life, health, property,
and public welfare;
B.
To allow and promote positive conditions for sign communication;
C.
To reflect and support the desired ambience and development patterns
of the various zones, overlay zones, and plan zones and promote an
attractive environment;
D.
To allow for adequate and effective signs whose dimensional characteristics
further the interests of public safety and the needs of the motorist,
where signs are viewed from a street or roadway.
E.
To ensure that the constitutionally guaranteed right of free expression
is protected.
Where there is a conflict between specific sign regulations
and the base or general sign regulations of this chapter, the specific
sign regulations supersede the base sign regulations.
|
FREESTANDING SIGNS
usually perpendicular to viewer's line-of-sight. May be double
or multi faced and contain thematic embellishment and integral covers
or cladding to conceal structural supports.
 |
Embellishment or support cladding is not included in the sign
area unless it contains copy.
 |
 |
 |
The following are exempt from the regulations of this article,
but may be subject to other regulations enacted by the City where
applicable:
A.
Signs inside a building;
B.
Signs carved into a building or raised in integral relief on a building.
Signs or letters that are raised must be a physical part of the building
facade to qualify under this provision; they must be a part of the
physical construction of the building materials comprising the facade;
letters or signs that are merely attached to the exterior facade of
the building do not qualify, even if the same finish or color;
C.
Signs required by federal, state, or municipal law;
D.
Name and address. Up to two signs indicating address, number, and/or
name of occupants of the premises, which do not exceed two square
feet in area per side, and do not include any commercial advertising
or other identification;
E.
Decals. Decals and/or logos affixed to windows or door glass panels,
such as those indicating membership in a business group or identifying
credit cards accepted at the establishment;
F.
Handicapped parking space. Signs not exceeding two square feet in
area reserving parking for handicapped individuals;
G.
Private drive signs. On-premises private drive signs are limited
to one per driveway entrance, not exceeding two square feet in area;
H.
Public signs. Signs erected by government agencies or utilities,
including traffic, utility, safety, railroad crossing, and identification
signs for public facilities;
I.
Security and warning signs. On-premises signs regulating the use
of the premises, such as "no trespassing," "no hunting," and "no soliciting"
signs that do not exceed one sign two square feet in area in residential
areas and one sign five square feet in area in Commercial, Manufacturing,
and Industrial Park Manufacturing Zones. These limitations shall not
apply to the posting of conventional "no trespassing" signs in accordance
with state law.
A.
Sign cabinets. The area of sign faces enclosed in frames or cabinets
is determined based on the outer dimensions of the frame or cabinet.
B.
Double-sided signs. Only one side of a double-sided sign is counted
in determining the area of sign faces. Where the two sides are not
of equal size, the larger of the two sides is used for the determination
of sign area.
C.
Round, oval, and irregularly shaped signs: to be measured based on
the appropriate mathematical formula to obtain the sign area for a
circle, an oval, or irregularly shaped sign.
D.
Calculating sign area (See § 440-174, Sign area computational methodology/ground signs).
(1)
Signs containing integral background areas. The area of a sign
containing a clearly defined background area shall be calculated based
on the area of the smallest standard geometric shape or combination
of geometric shapes capable of encompassing the perimeter of the background
area of the sign. In the case of signs in which multiple background
areas are separated by open space, sign area shall be calculated based
on the sum of the areas of all separate background areas, calculated
as referenced above, but without regard for any open space between
the separate background areas.
(2)
Signs without integral background areas. In instances in which
a sign consists of individual elements such as letters, symbols, or
other graphic objects or representations that are painted, attached
to, or otherwise affixed to a surface such as a wall, window, canopy,
awning, architectural projection, or to any surface not specifically
designed to serve as a sign background, the sign area shall be based
on the sum of the individual areas of the smallest geometric shape
or combination of geometric shapes capable of encompassing the perimeters
of the individual elements comprising the sign.
E.
Awnings and canopies. When graphics or sign copy are incorporated
into an awning, the sign area is determined by computing the area
of a standard imaginary geometric shape or combination of shapes drawn
around the sign copy area or graphics. When the ends of awnings or
marquees are parallel and contain graphics or sign copy, only one
side is counted in addition to the sign face area on the front.
A.
The overall height of a freestanding sign or sign structure is measured
from the lowest point of the ground directly below the sign to the
highest point of the freestanding sign or sign structure.
B.
Exception. Where a freestanding sign or sign structure is mounted
along a roadway that has a higher grade level as compared to the grade
level directly below the freestanding sign or sign structure, then
the freestanding sign or structure's height will be measured from
the roadway grade level to the highest point of the freestanding sign
or sign structure. See Figure 14.1.
|
Figure 14.1. Sign Height for Roadways with Higher Grade
 |
A.
General standards. Standards for permanent on-premises signs in the
following residential zones are described below:
|
R-1
|
Single-Family Residential.
| |
|
R-2
|
Duplex Residential.
| |
|
R-3
|
Townhouse Residential.
| |
|
R-4
|
Multifamily Residential.
|
B.
Subdivisions and apartment, duplex, and townhouse complexes are permitted
a freestanding sign not to exceed 64 square feet, and further provided
that one such sign shall be permitted for each separate street and/or
separate building frontage occupied by the subdivision, apartment,
or condominium complex and/or for each means of entrance to or exit
from the subdivision, apartment, duplex or townhouse complex.
C.
For properties located in a residential zone as described in Subsection B above, other directional, incidental, and/or accessory signs are also permitted, to be located within the subdivision, duplex, or townhouse complex development. Such directional, incidental, and/or accessory signs shall not exceed six square feet in sign area and four feet in height (if freestanding).
D.
Other nonresidential uses in a residential zone are permitted a freestanding
sign not to exceed 48 square feet, and further provided that one such
sign shall be permitted for each separate street and/or separate building
frontage occupied by the permitted use, and for each means of entrance
to or exit from the permitted use.
E.
Electronic message centers (EMC). EMCs are allowed, by conditional use only, on properties with permitted nonresidential uses in a residential zone. They are prohibited on residential properties and on subdivision, apartment, and multifamily dwellings and condominium properties. See § 440-183, Electronic message centers.
[Amended 9-28-2015 by Ord. No. 15-11; 11-16-2015 by Ord. No. 15-14]
A.
Signs for each separate establishment within the Neighborhood and
Central Commercial Zones shall not exceed an aggregate area of 75
square feet and further provided that not more than two signs shall
be permitted.
B.
Freestanding signs shall be limited to a height of 12 feet above
the grade level.
C.
Electronic message centers are prohibited in Neighborhood and Central
Commercial Zones.
[Amended 9-28-2015 by Ord. No. 15-11; 11-16-2015 by Ord. No. 15-14; 6-19-2017 by Ord. No. 17-08]
General standards and sign features. The standards for permanent
signs in Service Commercial, Manufacturing, and Industrial Park Manufacturing
Zones are as follows. All such signs must conform to the regulations
of this section.
A.
Signs for permitted uses other than a multitenant (three or more
tenants) development or professional building shall be permitted,
provided that the aggregate area of any such sign(s) shall not exceed
153 square feet and further provided that not more than one freestanding
sign shall be permitted. For establishments with more than one street
frontage, the total permitted aggregate sign area shall be increased
by 32 square feet for each additional street frontage beyond the first
and one additional freestanding sign shall be permitted for each additional
street frontage beyond the first.
B.
Signs for a multitenant (three or more tenants) development or professional
building, including a directory of tenants engaged in professional
and/or commercial activity on the premises. Not more than two signs
shall be permitted per separate establishment, not exceeding an aggregate
area of 100 square feet. In addition, the parcel shall be further
permitted one freestanding multipanel sign, the area of which shall
not exceed 100 square feet, for each means of entrance to the premises.
C.
Freestanding signs shall be limited to a height of 35 feet above
the grade level.
A.
Where these regulations apply. These regulations apply to all signs
regulated by this article.
B.
Sign placement. All signs and sign structures must be erected and
attached totally on or within the site or property to which they refer,
behind any applicable legal right-of-way.
C.
Signs extending into the right-of-way. Exceptions:
(1)
Projecting signs, awnings, and marquees in a Neighborhood or
Central Business Zone, projecting over a public sidewalk.
(2)
Projecting signs extending over a public sidewalk shall be limited
to a projection distance not to exceed 2/3 of the width of the sidewalk.
(3)
A-frame signs. A-frame signs may be used in a Neighborhood or
Central Business Zone if they meet the following standards:
D.
Removal of signs. The City Manager may require signs extending into
the right-of-way to be modified or moved if streets are widened or
other improvements are made in the right-of-way which result in the
creation of unsafe conditions. The modification or moving will be
at the owner's expense. If a nonconforming sign is moved under this
requirement, it may be re-erected on the site without being brought
into conformance.
E.
Freestanding signs may not extend into the right-of-way.
G.
Projecting signs placement. Projecting signs are not allowed on rooftops
or on pitched roofs. Projecting signs may not extend over a right-of-way
unless they are located in a Neighborhood or Central Commercial Zone.
There must be eight feet from grade to the bottom of the projecting
sign.
H.
Directional signs.
(1)
General standards. Directional signs that meet the standards
of this subsection are allowed in all zones and are not counted in
the total square footage of permanent signage allowed on any property
or site.
(2)
Size. Freestanding directional signs may be up to six square
feet in area and 48 inches above grade. Fascia directional signs may
be up to 16 square feet in area.
(3)
Directional signs in any zone may have internal or external
illumination.
I.
Temporary signs. Temporary signs for special events, including inflatable signs with a surface area of less than 100 square feet and not more than 20 feet tall, may be erected on the premises of any establishment conducting a special event, provided that such signs do not exceed a total of two signs with a total of 100 square feet in sign area. For the purposes of this section, a temporary sign is a sign intended to display either commercial or noncommercial messages of a transitory or temporary nature. Any signs not permanently embedded in the ground, or not permanently affixed to a building or sign structure that is permanently embedded in the ground, are considered temporary signs. A temporary sign shall be displayed no more than 90 days per calendar year and no more than 30 consecutive days. For grand openings, the maximum number, sign type, and allowable area may be waived by the City Manager. Permits for such signs are required and shall be accompanied by a fee as provided for in Chapter 180, Fees, Municipal. Inflatable signs can be used with the following provisions:
A.
In the Service Commercial, Manufacturing, and Industrial Park Manufacturing
Zones, electronic message centers (EMCs) are permitted in accordance
with the sign areas noted in this article.
B.
Additional general EMC regulations.
(1)
An EMC sign may be a portion of a building sign or freestanding
sign, or may comprise the entire sign area.
C.
EMC regulations by zone.
(1)
In residential zones, EMC signs are permitted only in certain circumstances by conditional use in accordance with § 440-179E of this article. They are otherwise prohibited in residential zones.
(2)
In residential zones, where permitted, EMC signs shall have
a minimum display time of 12 seconds. The transition time between
messages and/or message frames is limited to one second.
(3)
In residential zones, where permitted, the following EMC display
features and functions are prohibited: scrolling, traveling, flashing,
spinning, rotating, fade, dissolve, any other moving effects, and
all dynamic frame effects or patterns of illusionary movement or simulated
movement.
(4)
In the Service Commercial, Manufacturing, and Industrial Park
Manufacturing Zones, an EMC may use the following display features
and functions: images and frame effects that appear or disappear from
the display through dissolve, fade, or flip. Continuous scrolling
left or right, live action or streaming video and flashing messages
shall not be permitted.
[Amended 3-20-2017 by Ord. No. 17-02[1]]
[1]
Editor’s Note: This ordinance also repealed former Subsection
C(5), which immediately followed and prohibited certain EMC display
features and functions.
Signs may be illuminated consistent with the following standards:
A.
A sign in any zone may be illuminated at night. Signs that are illuminated
at night may not exceed a maximum luminance level of 750 cd/m2 or nits, regardless of the method of illumination.
B.
Signs that have external illumination, whether the lighting is mounted
above or below the sign face or panel, shall have lighting fixtures
or luminaires that are fully shielded.
C.
All illuminated signs must comply with the maximum luminance level
of 750 cd/m2 or nits at least 1/2 hour
before apparent sunset, as determined by the National Oceanic and
Atmospheric Administration (NOAA), U.S. Department of Commerce, for
the specific geographic location and date. All illuminated signs must
comply with this maximum luminance level throughout the night, if
the sign is energized, until apparent sunrise, as determined by the
NOAA, at which time the sign may resume luminance levels appropriate
for daylight conditions, when required or appropriate.
D.
On-premises signs do not constitute a form of outdoor lighting at
night, and are exempt from any other outdoor lighting regulations
that the City has adopted, or will adopt in the future.
A.
Permanent signs and sign structures that are moved, removed, replaced,
or structurally altered must be brought into conformance with the
sign regulations. However, nonconforming signs required to be moved
because of public right-of-way improvements may be re-established.
Removable faces or sign panel inserts in a cabinet style sign may
also be changed by right, and such change does not constitute a structural
alteration nor trigger loss of nonconforming status.
B.
Ownership. The status of a nonconforming sign is not affected by
changes in ownership.
C.
Once a sign is altered to conform or is replaced with a conforming
sign, the nonconforming rights for that sign are lost and a nonconforming
sign may not be reestablished.
D.
Loss of nonconforming sign status.
(1)
Discontinuance. A sign, including, but not limited to, structures,
supports, poles, braces, and anchors, that for 180 days or more no
longer identifies or advertises an ongoing business, product, location,
service, idea, or activity conducted on the premises on which the
sign is located or a sign that for seven days or more no longer identifies
or advertises an event or election, shall be discontinued.
(2)
Destruction. When a sign or sign structure is removed or intentionally
destroyed, replacement signs and sign structures must comply with
the current standards. However:
(a)
Repair and maintenance. A nonconforming sign or sign structure
may be removed temporarily to perform sign maintenance or sign repair.
(b)
Unintentional destruction. When a sign or sign structure that
has nonconforming elements is partially or totally damaged by fire
or other causes beyond the control of the owner, the sign and sign
structure may be rebuilt to the same size and height using the same
materials.
A.
Structural standards.
(1)
Signs, sign structures, sign foundations, and methods to attach and anchor signs must be designed and constructed in accordance with applicable provisions of Chapter 102, Building Standards. All signs and their foundations and attachments must be designed for the appropriate dead, wind, and snow loads for the geographic area in question.
(2)
The supports and foundations used in construction for all signs
and sign structures must be located outside of any rights-of-way.
B.
Engineering standards.
(1)
Signs, sign structures, sign foundations and anchorages to a building must be individually designed in accordance with Chapter 102, Building Standards, and the provisions of this article.
(2)
When Chapter 102, Building Standards, calls for sealed sign design construction plans to be submitted as a part of any sign permit application, this requirement is not compulsory as it relates to on-premises signs regulated under this chapter if the application contains sufficient information to satisfy the Building Code Official.
C.
Clearances.
(1)
Vision clearance areas. Vision clearance areas are triangular-shaped
areas located at the intersection of any combination of right-of-way,
alleys, or driveways. The sides of the triangle extend 30 feet from
the intersection of the right-of-way, alley, or driveway in either/each
direction. No sign may be installed within this clear sight triangle.
(2)
Vehicle area clearances. In areas outside of rights-of-way,
when a sign or awning extends over an area in which vehicles travel
or are parked, the bottom of the structure must be at least 14 feet
above the ground. Vehicle areas include driveways, alleys, parking
areas, and loading and maneuvering areas.
(3)
Pedestrian area clearances. When a sign or awning extends more
than 12 inches over a sidewalk, walkway, or other space used by pedestrians,
the bottom of the structure must be at least eight feet above the
ground.
(4)
Clearances from fire escapes, means of egress, or standpipes.
Signs, sign structures, and awnings are prohibited from being erected
in any manner that interferes in any way with the free use of any
fire escape, means of egress, or standpipe. Attaching signs, sign
structures, or awnings to a fire escape is prohibited.
(5)
Obstruction of windows and ventilation. Signs, sign structures, and awnings are prohibited from being installed in any way that obstructs any building openings to such an extent that light, ventilation, or exhaust are reduced to a level below that required by either Chapter 102, Building Standards, or Chapter 305, Property Maintenance.
D.
Signs, sign structures, supports, foundations, panels, and methods
to attach the sign to the structure shall be removed when the principal
structure on the lot is demolished.
A.
Signs, sign structures, and awnings, together with their supports,
braces, guys, anchors and electrical components, must be maintained
in a proper state of repair. The City Manager may order the removal
of any sign, sign structure or awning that is not maintained in accordance
to this chapter.
B.
Dangerous structures and equipment.
(1)
Signs, sign structures, or awnings that are dangerous must be
taken down and removed or made safe as the City Manager deems necessary.
Signs may be deemed dangerous for one or more of the following reasons:
(a)
Whenever a sign structure or its foundation, a sign's attachments to a building, or a building to which a sign is attached are damaged by fire, earthquake, wind, flood, or by any other cause, to such an extent that the structural strength or stability is materially less than it was before the catastrophe and is less than the minimum requirements of Chapter 102, Building Standards;
(b)
Whenever any portion or member of a sign, sign structure, or
awning is likely to fail, or become detached or dislodged, or to collapse
and thereby injure persons or property;
(c)
Whenever any portion or member of a sign, sign structure or
awning is likely to partially or completely collapse as a result of
any cause, including dilapidation, deterioration, or decay; faulty
construction or wiring; or removal, movement or instability of any
portion of the ground or building necessary for supporting such structure;
(d)
Whenever a sign, sign structure, or awning is structurally or
electrically unsafe or otherwise hazardous to human life or safety
by reason of inadequate maintenance, dilapidation, obsolescence, fire
hazard, disaster, damage, or abandonment.
(2)
All signs, sign structures, and awnings determined after inspection
by the City Manager to be dangerous must be abated by repair, rehabilitation,
demolition, or removal.
No sign, advertising display, or structure, poster, or device shall be erected, moved, enlarged, replaced, refaced, or reconstructed except by permit from the City Manager and in accordance with this chapter. See Chapter 292, Permits and Approvals, Article II, Building Permits; Certificates of Occupancy.
A.
Signs permitted in all zones.
(1)
Signs advertising the sale, lease, or rental of the premises
upon which the sign is located, which shall not exceed six square
feet in residential zones and 32 square feet in all other zones, and
shall be located behind the property line. One such sign shall be
permitted for each 200 linear feet of street frontage for the parcel.
(2)
Signs designating the name and address of the occupants, hours
of operation, security notices, and business policy statements, and
may not exceed four square feet.
(3)
Signs denoting the architect, engineer, developer, or contractor
placed on premises where construction, repair, or renovation is in
progress, which signs shall not exceed 32 square feet in area. No
more than two signs of any type are permitted for any one property
or building project. Signs shall be 50 feet from other signs on the
site, except where it is not physically possible, then the signs shall
be as far away from the other sign as possible.
(4)
Public signs. "Public sign" is defined as a sign erected by
or on behalf of a governmental body to post a legal notice, identify
public property or public buildings, convey public information, and
direct or regulate pedestrian or vehicular traffic.
(5)
Any sign located in an internal location on a site, campus,
or complex and that cannot be seen from any public right-of-way or
adjacent property.
(6)
Historical and memorial signs or tablets, nameplates, and/or
address identification signs, provided that no more than two are erected
per premises, with each sign area being no more than two square feet.
(7)
People wearing costumes of the logo or character associated
with the company, as long as they are located on the business premises.
(8)
Political signs shall not be over six square feet in sign area
in all residential zones and shall not be over 32 square feet in all
other zones. All election signs shall be removed no later than seven
days after the election.
(9)
Signs noting a tenant, store, building, etc., is "coming soon,"
which sign shall not exceed 32 square feet, and only one sign is permitted
on the site. The sign shall be 50 feet from other signs. The sign
shall not be placed on the site for more than six months. After six
months, the sign shall be removed even if the tenant, store, building,
etc., has not opened or been constructed.
(10)
Portable signs designed to be transported, including, but not
limited to, A-frames, T-frames, and sandwich boards used for advertising.
These types of signs shall not obstruct pedestrian or vehicular access
or traffic, are limited to one sign per business, and shall not be
over four feet above grade.
(11)
Signs required by federal or state law or by a municipal authority.
(12)
Decorative flags or flags indicating the establishment is open
for business on flagpoles and individual pennants not on a string
with the following provisions:
(a)
When installed over a public sidewalk, the bottom of the flag
shall be no less than six feet above the established sidewalk;
(b)
The flag shall not impede pedestrian traffic along public sidewalks;
(c)
The size of the flag shall be no larger than three feet by five
feet;
(d)
Flags displayed shall be limited to the hours which the business
is open or dawn to dusk.
(13)
Open-for-business signs, not to exceed two square feet per business.
(14)
Civic, nonprofit event signs used to advertise, promote public
entertainment uses, including carnivals, circuses, street fairs, concerts,
cultural events, home and garden shows, parades, community events,
and civic fund-raising events such as carwashes and yard sales. The
following provisions apply:
(a)
For the purposes of this subsection, civic event signs shall include sign banners, balloons, flags, streamers, and pennants. Vehicle-mounted signs and portable signs are prohibited, except as may otherwise be provided in § 440-189A(10).
[Amended 9-28-2015 by Ord. No. 15-11]
(b)
No strobe lights, flashing lights, or search lights are permitted.
(c)
All banner signs shall include wind cuts as necessary to reduce
sign billowing or sailing and shall be securely fastened to a building,
private light standard, or other permanent structure. Such banners
shall not be mounted to trees or other landscaping elements. Such
banners may be mounted to poles or stakes that must be removed when
the banner is removed.
(d)
Size and quantity of signs are not regulated; however, signs
shall not be displayed for more than 14 days prior to the event and
shall be removed within 48 hours after the event.
(15)
Pennants on a string in motor vehicle sales lots, provided that
they are securely fastened to permanent structures and set back from
all streets and driveways. Pennants that are determined by the City
Manager to be torn, faded, or soiled are prohibited.
(16)
Umbrellas used for advertising. These types of signs shall not
obstruct pedestrian or vehicular access or traffic.
B.
The following signs are prohibited in all zones:
(1)
Signs adversely affecting safety. Signs which prevent free ingress
or egress from any door, window, fire escape, or that prevent free
access from one part of a roof to any other part; no sign other than
a safety sign shall be attached to a standpipe or fire escape.
(2)
Simulated traffic signs and obstructions. Any sign which may
be confused with, or obstruct the view of, any authorized traffic
sign or signal, obstruct the sight-distance triangle at any road intersection,
or extend into the public right-of-way.
(3)
Signs with intermittent lights resembling or seeming to resemble
the flashing lights customarily associated with danger or such as
are customarily used by police, fire, ambulance vehicles, fire police,
or for navigation purposes. Signs located and so illuminated as to
provide a background of colored lights blending with traffic signal
lights to the extent of confusing a motorist when viewed from the
normal approaching position of a vehicle at a distance of 25 feet
to 300 feet, or which compete for attention with, or may be mistaken
for, traffic signals, as determined by the City Manager. Also, any
sign that is determined by the City Manager to constitute a traffic
hazard by reason of size, location, content, color, or type of illumination.
(4)
Signs which emit smoke, gaseous matter, visible vapors, particles,
sound, or odor shall be permitted; open flames used to attract public
attention to a place of business or to an advertising sign shall not
be permitted.
(5)
Mechanically moving signs. An environmentally activated sign or other display with actual mechanical motion powered by natural, manual, mechanical, electrical, or other means, including but not limited to pennant strings, streamers, spinners, propellers, and search lights. See also § 440-183, Electronic message centers.
(7)
Signs that are flashing, rotating, or fluttering material or
that give the appearance of movement, or are illuminated by flashing
or intermittent lights, or lights of changing degrees or intensity,
or signs containing strobe lights.
(8)
Off-premises signs of any type (billboards, temporary signs,
directional signs for developments, etc.), except for freestanding
signs shared with an immediately adjacent property.
(9)
Vehicle and utility trailer signs. A motor vehicle or utility
trailer may not park on City streets or in a place visible from a
public roadway as a sign or as the base for a sign where the primary
purpose of the motor vehicle or utility trailer is general advertising
or advertising for hire. The following criteria may be used in determining
whether the primary purpose of the motor vehicle or utility trailer
is a sign. It is not necessary that any one or all of the listed criteria
are present in order to determine that a sign is a prohibited vehicle
sign or utility trailer sign.
(a)
Whether the sign is painted upon or applied in a permanent manner
directly to an integral part of the vehicle or trailer or merely temporarily
attached to the vehicle or trailer;
(b)
Whether the vehicle or trailer is in operating condition, currently
registered and licensed to operate on public streets, when applicable;
(c)
During the business' hours of operation, the vehicle or trailer
is not moved and the vehicle or trailer is so parked or placed that
the signs thereon are displayed to the public;
(d)
Whether the vehicle or trailer is regularly parked in a location
and in a manner so as to be observed by passersby;
(e)
Whether the vehicle or trailer is actively used in the daily
function of the business to which such signs relate; and
(f)
Whether the sign includes directional copy that would only be
applicable if parked in the vicinity of the use.
(10)
Roof signs, except where it has been determined that the building's
mountable wall area would permit less than 1/2 of the permitted maximum
wall signage, in which case a roof sign is permitted under the following
conditions:
(11)
Signs painted on or attached to trees, fences, natural features,
or telephone or utility poles.
(12)
People wearing sandwich boards or holding other types of signs,
except as used for community events or by nonprofit organizations
for fund-raising purposes, as approved by the City Manager.
(13)
Temporary signs made of cardboard, paper, canvas, or similar impermanent material, except as permissible in § 440-182I.
(14)
Inflatable signs, balloons, streamers, flags, etc., except as
provided for in this section or on a temporary basis, as approved
by the City Manager, for grand opening events and community festivals.
(15)
Portable signs designed to be transported, including, but not limited to, signs designed to be transported by means of wheels, signs converted to A-frames or T-frames, sandwich boards, and umbrellas, used for advertising, except those permitted in § 440-189A(10) and (16).
[Amended 9-28-2015 by Ord. No. 15-11]
(16)
Window signs covering more than 50% of a window or a door or
mounted above the first floor.
(17)
Illuminated window signs in or adjacent to residential properties
or zones.
(18)
Mirrors. No mirror device shall be used as part of a sign.
(19)
Torn, faded, or soiled signs.
(20)
Abandoned sign structures, as defined by this chapter.
In areas under the joint overlapping jurisdiction of the Department
of Transportation and the City of Harrington with reference to setback
requirements of signs from the front lot line of a property, the more
restrictive regulation shall apply.
