[R.O. 2009 §22-36; Code 1969 §37-10]
The final plat on tracing cloth and five (5) black and white
prints thereof together with copies of any deed restrictions where
such are too lengthy to be shown on the plat and three (3) prints
of certified plans showing the improvements that have been constructed
within the subdivision or, a bond assuring construction of such improvements
in accordance with plans previously approved, shall be submitted to
the Planning and Zoning Commission. Before approving the plat of all
or part of a proposed subdivision, the Planning and Zoning Commission
shall require proof that the improvements and revisions thereof required
in this Chapter have been satisfactorily completed. The Planning and
Zoning Commission shall act upon the final plat within thirty (30)
days after it has been submitted unless the subdivider agrees to an
extension of this period.
[R.O. 2009 §22-37; Code 1969 §37-11]
The final plat is to be drawn at a scale of one hundred (100)
feet or less to the inch from an accurate survey and on one (1) or
more sheets whose maximum dimensions are twenty-nine (29) inches by
thirty-four (34) inches. In certain unusual instances where the subdivided
area is of unusual size or shape, the Planning and Zoning Commission
may permit a variation in the scale or size of the final plat. If
more than two (2) sheets are required, an index sheet of the same
dimensions shall be filed showing the entire subdivision on one (1)
sheet together with all areas shown on other sheets.
[R.O. 2009 §22-38; Code 1969 §37-12]
A.
The
final plat shall show:
1.
The boundary lines of the area being subdivided with accurate distances
and bearings, also all Sections, U.S. Survey and Congressional Township
lines and the boundary lines of incorporated areas, sewer, school
and other legally established districts within or adjoining the subdivided
area;
2.
The lines of all proposed streets and alleys with their width and
names;
3.
The accurate outline of any property which is offered for dedication
for public use;
4.
The line of departure of one street from another;
5.
The lines of all adjoining lands and the lines of adjacent streets
and ways with their width and names;
6.
All lot lines and an identification system for all lots and blocks;
7.
Building lines and easements for rights-of-way provided for public
use, services or utilities with figures showing their dimensions;
8.
All dimensions, both linear and angular, necessary for locating boundaries
of subdivisions, lots, streets, alleys, easements for building lines
and of any other area for public or private use. The linear dimensions
are to be expressed in feet and decimals of a foot;
9.
Radii, arcs and chords, points of tangency, central angles for all
curvilinear streets and radii for all rounded corners;
10.
All survey monuments and benchmarks together with their descriptions.
[R.O. 2009 §22-39; Code 1969 §37-13]
A.
The
same procedure shall be followed with respect to the final plat as
is specified with respect to the preliminary plat, including the provisions
with respect to time within which such plat shall be approved and
after such final plat has been approved by the Planning and Zoning
Commission, they shall initial or sign a copy of such final plat and
deliver to the Department of Planning and Development's office the
original tracing and a copy thereof, together with a letter indicating
their approval thereof.
B.
At
the first (1st) meeting of the Board of Aldermen thereafter, such
final plat shall be presented to the Board of Aldermen for its approval
or rejection.
C.
If
the Planning and Zoning Commission does not approve the final plat
of the subdivision, the Board of Aldermen may approve the plat only
by a two-thirds (⅔) vote of the membership of the Board of
Aldermen. Two (2) copies of all final plats shall be filed in the
office of the Department of Planning and Development after approval
by the Board of Aldermen.
D.
If
the final plat conforms to the approved preliminary plat and if the
necessary improvements are constructed in accordance with the approved
plans therefor or a satisfactory bond or escrow agreement is submitted
assuring their construction in accordance with the approved plans,
the final plat will be approved by the Planning and Zoning Commission
and the Board of Aldermen.
