[Added 11-14-1988 by Ord. No. 164]
The following regulations and applicable regulations
contained in other articles shall apply in the I-G General Industrial
District.
The principal permitted uses in this district
shall be as follows:
A.
Uses of a heavy industrial nature, but not limited to the following, provided such uses shall be located two times the distance requirements specified in § 180-16:
(1)
Manufacture and assembly of aircraft, automobiles,
house trailers or other vehicles.
(2)
Manufacture of brick, clay products.
(3)
Machine shops, structural steel fabricating.
(4)
Coal yards.
(5)
Copperage works.
(6)
Contractor's equipment storage yard.
(7)
Crematories.
(8)
Manufacture or processing of chemicals, except sulfuric,
nitric or hydraulic or other corrosive or offensive acids.
(9)
Manufacture of dye or dyestuff and printing ink.
(10)
Electric generating or steam power plants.
(11)
Flour mill, grain milling or drying.
(12)
Manufacture of felt, shoddy, hair products,
feathers, emery cloth, sandpaper or sand blasting and/or products
therefrom.
(13)
Enameling, japanning, lacquering, galvanizing
and plating.
(14)
Manufacture or processing of meat or food products,
except slaughterhouses.
(15)
Manufacture of paper, pulp, or cloth.
(16)
Manufacture of perfume.
(17)
Manufacture of pickle, sauerkraut, vinegar,
yeast, soda or soda compounds.
(18)
Manufacture of rayon or similar products.
(19)
Manufacture of, rubber or rubber products.
(20)
Manufacture of starch, glucose, dextrin or spice.
(21)
Manufacture of soap, oil, paints, turpentine.
(22)
Manufacture of wire or wire products.
B.
Agriculture for interim use, provided that any buildings or feeding pens in which farm animals are kept shall comply with the distance requirements of § 180-16.
C.
Any use permitted or as regulated as a principal permitted
use in the I-R District, except as hereinafter modified.
D.
Any use permitted and as regulated as a principal
permitted use and a conditional use in the B-L and B-G Districts except
dwellings.
E.
Any other use that is determined by the Board to be
of the same general character as the above permitted uses and which
would not be detrimental to the public health, safety, or general
welfare of the community.
The conditional uses requiring Board authorization
in this district shall be as follows:
A.
The following uses, when the location of such use shall have been authorized by the Board, provided that such use shall not be less than 1,000 feet from any R District, except an I-R District, and four times the distance requirements as specified in § 180-16:
(1)
Acid or heavy chemical manufacture, processing or
storage.
(2)
Blast furnace or boiler works.
(3)
Cement, lime, gypsum or plaster of paris manufacturing.
(4)
Distillation of bones, fat rendering, grease, lard
or tallow manufacturing or processing.
(5)
Explosive manufacture or storage.
(7)
Fertilizer, potash, insecticide, glue, size or gelatin
manufacture.
(8)
Foundries.
(9)
Gas manufacture or storage for heat or illumination.
(10)
Petroleum products refining or storage above
ground in tanks in excess of 1,000 gallons, provided that all state
and federal laws, as well as National Fire Underwriters Codes, are
complied with.
B.
Bituminous concrete (blacktop) mixing plants as regulated
in the I-R District.
C.
Any conditional use set forth and as regulated in
the I-R District.
The accessory uses allowed in this district
shall be as follows:
A.
Uses customarily accessory and incidental to any principal
permitted use or authorized conditional use, including a mobile home
or dwelling associated with an industrial use.
No structure shall exceed three stories or 50 feet in height except as provided in § 180-100.
Yard requirements shall be the same as in the
I-R District.
All applications for permitted or conditional
uses shall be subject to a site plan review by those agencies determined
appropriate by the Zoning Administrator, who, following any referral
to such agencies, shall cause the plan to be presented to the Council
which shall have the authority to approve the plan as presented, or
approve the plan with modifications or conditions. In approving site
development plans, the Council or its duly authorized representative
shall have the authority to:
A.
Limit the number and approve the location and design
of entrances in the interest of public safety and minimizing traffic
congestion to the greatest extent possible.
B.
Require, where appropriate, a landscaping and signing
plan to promote an attractive and pleasing appearance.
C.
Approve lighting arrangements where appropriate to
insure no visual interference to the traveling public on adjacent
roadways, or glare or reflections on adjacent buildings.
D.
Require binding agreement, backed by bond or other
surety, and provided to the Council where an occupancy permit is requested
prior to the completion of the site development plan and/or the fulfillment
of any conditions attached thereto.
E.
Insure conformance to all duly adopted elements of
the Town Master Plan.
