The maximum axle load shall not exceed the number of pounds designated
in the following provisions which prescribe the distance between axles:
A.
When the axle spacing is nine feet or more between axles,
the maximum axle load shall not exceed 18,000 pounds for vehicles equipped
with high pressure pneumatic or balloon tires.
B.
When the axle spacing is less than nine feet between
two axles but more than 3 1/2 feet, the maximum axle load shall not exceed
13,000 pounds for vehicles equipped with high pressure pneumatic or balloon
tires.
C.
When axles are spaced less than 3 1/2 feet apart,
the maximum axle load shall not exceed 9,000 pounds per axle.
When normal loading is in effect, the State Transportation Department
and local authorities with respect to highways under their jurisdiction may
designate certain highways, or sections of those highways, where bridges and
road surfaces are adequate for heavier loading, which designation may be revised
as needed, on which the maximum tandem axle assembly loading shall not exceed
16,000 pounds for any axle of the assembly, if there is no other axle within
nine feet of any axle of the assembly.
Except as provided in § 199-57, on a legal combination of vehicles, only one tandem axle assembly shall be permitted on the designated highways at the gross permissible weight of 16,000 pounds per axle, if there is no other axle within nine feet of any axle of the assembly, and if no other tandem axle assembly in the combination of vehicles exceeds a gross weight of 13,000 pounds per axle. When the maximum gross weight of a combination of vehicles with load does not exceed 73,280 pounds, two tandem axle assemblies shall be permitted on the designated highways at a gross permissible weight of 16,000 pounds per axle, if there is no other axle within nine feet of any axle of the assembly.
The normal size of tires shall be the rated size as published by the
manufacturers, and the maximum wheel load permissible for any wheel shall
not exceed 700 pounds per inch of width of tire.
A.
During the months of March, April and May in each year,
the maximum axle load allowable on concrete pavements, or pavements with a
concrete base, shall be reduced by 25% from the maximum axle load as specified
in this chapter, and the maximum axle loads allowable on all other types of
roads during these months shall be reduced by 35% from the maximum axle loads
as specified. The maximum wheel load shall not exceed 525 pounds per inch
of tire width on concrete and concrete base or 450 pounds per inch of tire
width on all other roads during the period the seasonal road restrictions
are in effect.
B.
Upon receipt of a written application and good cause
being shown, the State Transportation Department for roads under their jurisdiction
and County Road Commissions, for roads under their jurisdiction, may permit
exemptions from seasonal weight restrictions for milk on specified routes
when requested. Approval or denial of a request for an exemption shall be
given by written notice to an applicant within 30 days after the date of submission
of the application. If a request is denied, the written notice shall state
the reason for denial and alternate routes for which the permit may be issued.
C.
The applicant shall have the right to appeal to the State
Transportation Commission or the County Road Commission.
D.
These exemptions shall not apply on county roads in counties
which have negotiated agreements with milk haulers, or haulers of other commodities,
during period of seasonal load limits in years prior to the effective date
of this 1993 amendatory act. This 1993 amendatory act shall not limit the
ability of these counties to continue to negotiate such agreements.
The State Transportation Department or a local authority with respect
to highways under its jurisdiction may suspend the restrictions imposed by
this article when and where, in its discretion, conditions of the highways
or the public health, safety and welfare so warrant, and may impose the restricted
loading requirements of this article on designated highways at any other time
that the conditions of the highway may require.
For the purpose of enforcement of this chapter, the gross vehicle weight of a single vehicle and load or a combination of vehicles and loads shall be determined by weighing individual axles or groups of axles, and the total weight on all the axles shall be the gross vehicle weight. In addition, the gross axle weight shall be determined by weighing individual axles or by weighing a group of axles and dividing the gross weight of the group of axles by the number of axles in the group. Pursuant to § 199-57, the overall gross weight on the group of two or more axles shall be determined by weighing individual axles or several axles, and the total weight of all the axles in the group shall be the overall gross weight of the group.
A.
The loading maximum in this section shall apply to interstate
highways, and the State Transportation Department or a local authority with
respect to highways under its jurisdiction may designate a highway, or a section
of a highway, for the operation of vehicles having a gross vehicle weight
of not more than 80,000 pound which are subject to the following load maximums:
(1)
Twenty thousand pounds on any one axle, including all
enforcement tolerances.
(2)
A tandem axles weight of 34,000 pounds, including all
enforcement tolerances.
(3)
An overall gross weight on a group of two or more consecutive
axles equaling:
|
W = 500((LN/(N-1)) + 12N =36)
| ||||
|
Where
| ||||
|
W
|
=
|
Overall gross weight on a group of two or more consecutive axles to
the nearest 500 pounds.
| ||
|
L
|
=
|
Distance in feet between the extreme of a group of two or more consecutive
axles.
| ||
|
N
|
=
|
Number of axles in the group under consideration, except that two consecutive
sets of tandem axles may carry a gross load of 34,000 pounds each if the first
and last axles of the consecutive sets of tandem axles are not less than 36
feet apart.
| ||
B.
The gross vehicle weight shall not exceed 80,000 pounds including all enforcement tolerances. Except for five-axle truck tractor, semitrailer combinations having two consecutive sets of tandem axles, vehicles having a gross weight in excess of 80,000 pounds or in excess of the vehicle gross weight determined by application of the formula in this section shall be subject to the maximum axle loads of §§ 199-50, 199-51 and 199-52.
C.
As used in this section, "tandem axle weight" means the
total weight transmitted to the road by two or more consecutive axles, the
centers of which may be included between parallel transverse vertical planes
spaced more than 40 inches but not more than 96 inches apart, extending across
the full width of the vehicle.
