The standard application form will be available
at the Building Inspector's office.
A drawing at a scale of 100 feet to an inch
or larger, on a sheet not larger than 36 inches by 48 inches, shall
be prepared by a professional engineer or land surveyor licensed in
the State of New York, showing the following information:
A. The location and survey data of the premises where
it is proposed to generally regrade, excavate or remove earth products.
B. All streets adjoining and within 200 feet of the premises.
C. All existing buildings or structures on the premises
or within 200 feet of the premises.
D. Existing and proposed elevations at each described
stage in the proposed operation for the premises and all land within
200 feet of its boundaries, shown on a horizontal grid system with
a fifty-foot interval, and also on a cross section derived from that
grid system. Additional elevations shall be shown at each break in
the grades and along the center line of all adjoining streets.
E. Present and proposed surface-water drainage and natural
drainage features.
F. A key map at the scale of 600 feet to one inch, indicating
the relationship to the highway pattern, school and Town boundaries
and zoning districts.
G. A certification by a duly licensed professional engineer
or land surveyor in the State of New York that the existing grades
and elevations are based on an actual field survey.
H. The Building Inspector may require additional data
or waive requirements in appropriate cases.