A.Â
Purpose. The purpose of LB-1 Light Business and Institutional
District is to provide areas for the location of light business and
institutional uses, high-density residential uses, and public facilities
on highways or streets with sufficient capacity to accommodate project
traffic and adjacent to residential districts. The district regulations
and standards are designed to:
B.Â
Permitted uses. The permitted uses shall be those specified in the Table of Permitted Uses, § 225-67.
C.Â
Development options: planned business centers subject
to an approved development plan.
D.Â
General requirements. A site plan shall be submitted
to the Planning Commission for all proposed development within the
LB-1 District. The following supplemental standards apply to all uses
in the LB-1 Light Business and Institutional District:
(2)Â
Bulk regulations, including lot area, setback requirements
and height limitations, shall be provided for all uses in accordance
with the general requirements of Part 7.
(4)Â
Signage shall be provided for all uses in accordance
with the general requirements of Part 9.
(5)Â
Parking, including access requirements, shall be provided
for all uses in accordance with the general requirements of Part 10.
(6)Â
Landscaping shall be provided for all uses in accordance
with the general requirements of Part 11.
E.Â
Supplemental requirements.
(1)Â
Overhead doors facing a street and erection of external
tanks and equipment (beyond customary building mechanical systems)
that are not fully enclosed or fully screened from public view are
prohibited unless specifically approved by the Planning Commission.
(2)Â
Site design should ensure a compatible physical relationship
with the surrounding neighborhood.
A.Â
Purpose. The purpose of the LB-2 Light Business and
Residential District is to provide areas for low-impact commercial
uses along the edges of certain residential areas that are impacted
by high-volume traffic on major streets or highways and nearby commercial
or industrial uses.
B.Â
Permitted uses. The permitted uses shall be those specified in the Table of Permitted Uses, § 225-67.
C.Â
General requirements. A site plan shall be submitted
to the Planning Commission for all proposed development within the
LB-2 Light Business and Residential District. The following supplemental
standards apply to all uses in the LB-2 Light Business and Residential
District:
(2)Â
Bulk regulations, including lot area, setback requirements
and height limitations, shall be provided for all uses in accordance
with the general requirements of Part 7.
(4)Â
Signage shall be provided for all uses in accordance
with the general requirements of Part 9.
(5)Â
Parking, including access requirements, shall be provided
for all uses in accordance with the general requirements of Part 10.
(6)Â
Landscaping shall be provided for all uses in accordance
with the general requirements of Part 11.
D.Â
Supplemental requirements.
A.Â
The purpose of the AB Airport Business District is
to encourage development of county-owned land adjacent to the Salisbury-Ocean
City: Wicomico Regional Airport with an appropriate mix of business
and light industrial uses and to provide opportunities for alternative
densities, lot sizes and other bulk regulations.
(1)Â
Permitted uses in the AB District shall give the county
maximum flexibility in its site marketing and development program
and be consistent with the county's overall economic development objectives
and programs.
(2)Â
Minimum development standards for this district are
intended to ensure application of good site planning principles in
the development of each site.
B.Â
Permitted uses. To accomplish the purposes of this
district, it is in the best interest of the county that uses within
this district be as approved by the Wicomico County Airport Commission
in accordance with specific plans to assure that the county will benefit
from the proposed district with a minimum impact on the surrounding
areas and the environment.
C.Â
General requirements. Provisions of the AB District
where found to be in conflict with the following shall supersede those
other provisions with which they conflict:
D.Â
Site plan approval in the AB Airport Business District.
A.Â
The purpose of the I-1 Light Industrial District is
to provide areas for light industrial development, including manufacturing,
wholesaling, research and development activities, and selected businesses
and commercial uses. Development performance standards have been established
to ensure that no use is permitted which may be detrimental because
of odor, smoke, dust, toxic fumes, fire, noise, explosion, outside
storage or toxic or hazardous chemicals.
B.Â
Permitted uses. The permitted uses shall be those specified in the Table of Permitted Uses, § 225-67.
C.Â
Development options. A planned industrial park is
permitted with a development plan.
D.Â
General requirements.
(2)Â
Bulk regulations, including lot area, setback requirements
and height limitations, shall be provided for all uses in accordance
with the general requirements of Part 7.
(4)Â
Signage shall be provided for all uses in accordance
with the general requirements of Part 9.
(5)Â
Parking shall be provided for all uses in accordance
with the general requirements of Part 10.
(6)Â
Landscaping shall be provided for all uses in accordance
with the general requirements of Part 11.
E.Â
Supplemental requirement. In keeping with the purpose
of this district:
A.Â
The purpose of the I-2 Heavy Industrial District is
to encourage industrial growth in the county by providing areas suitable
for the development of heavy manufacturing, assembling, or industrial
processing activities that have characteristics that could be detrimental
if allowed to operate in other districts within the county. The standards
and restrictions established for this district are intended to protect
both nearby areas and industries which propose to locate or already
have located within this district.
B.Â
Permitted uses. The permitted uses shall be those specified in the Table of Permitted Uses, § 225-67.
C.Â
Development options. A planned industrial park is
permitted with a development plan.
D.Â
General requirements.
(2)Â
Bulk regulations, including lot area, setback requirements
and height limitations, shall be provided for all uses in accordance
with the general requirements of Part 7.
(4)Â
Signage shall be provided for all uses in accordance
with the general requirements of Part 9.
(5)Â
Parking shall be provided for all uses in accordance
with the general requirements of Part 10.
(6)Â
Landscaping shall be provided for all uses in accordance
with the general requirements of Part 11.