Measurement and analyses of industrial wastes are to include the following
list where applicable. The analyses are to be conducted in accordance with
the methods prescribed in the latest edition of Standard Methods for the Examination
of Water and Wastewater. If any item is not applicable, it shall be so stated
on the report of the measurements and the reason for deletion stated.
A.Â
Physical parameters: flow, pH, temperature, color, specific
conductance.
B.Â
Chemical and biological parameters: total solids, total
volatile solids, total suspended solids, total dissolved solids, acidity,
alkalinity, five-day BOD, COD, oil and grease, chloride, sulfate, sulfide,
phenols, NH3 (as N), NO3 (as N), NO2 (as N), Kjeldahl organic nitrogen (as
N), ortho-phosphorus (as P), total phosphorous as (P), Cr, Cu, Fe, Cd, Pb,
Mn, Zn, F, As, Hg.
