In R3 Districts, the regulations in this article
shall apply.
In an R3 District, a building may be erected,
altered or used and a lot or premises may be used for any of the following
purposes and for no other:
In an R3 District, no building shall be erected
or altered so as to exceed three stories or 45 feet in height; provided,
however, that this height limit may be increased one foot for each
one foot that each yard exceeds the minimum required.
In an R3 District:
A.
Single-family and two-family dwelling units shall conform with lot requirements specified in § 195-56 of this chapter.
B.
For multiple dwellings, the minimum lot area shall
not be less than 3,000 square feet per family unit and a lot width
not less than 75 feet for the first three dwelling units, but for
every dwelling unit beyond three, an additional 1,000 square feet
of lot area shall be required.
In an R3 District, all buildings, including
accessory buildings, shall not cover more than 40% of the lot.
Multiple dwellings in an R3 District shall meet
the following yard requirements:
In an R3 District, accessory building height,
yards and coverage shall be the same as required in R2 Districts.