The purpose of this district is essentially the same as the
purpose of the R-1 District while permitting a somewhat higher density.
Land, buildings, or premises shall be used by right for only
one or more of the following uses:
The following use is permitted by conditional use only, subject to the applicable provisions of Article XVIII:
A.ย
Those uses permitted by conditional use in the R-1 Residential District.
The following uses are permitted by special exception from the
Zoning Hearing Board, provided that they conform to the R-2 area and
bulk regulations:
The following uses are permitted as accessory uses incidental
to the uses permitted by right, provided that they conform to the
R-2 area and bulk regulations:
A.ย
Those uses permitted as accessory uses in the R-1 Residential District.
Standard
|
Size
| |
---|---|---|
Lot area
| ||
Single-family detached
|
4,000 square feet minimum
| |
Single-family semidetached
|
3,600 square feet minimum
| |
Lot width
| ||
Single-family detached
|
40 feet minimum
| |
Single-family semidetached
|
30 feet minimum
| |
Building coverage
|
40% maximum
| |
Impervious surface
|
50% maximum
| |
Front yard
|
25 feet minimum
| |
Side yards
| ||
Single-family detached
|
6 feet minimum (each side)
| |
Single-family semidetached
|
1 side yard, 10 feet minimum
| |
Accessory building
|
3 feet minimum (each side)
| |
Rear yard
| ||
Main building
|
20 feet minimum
| |
Accessory building
|
3 feet minimum
| |
Height
| ||
Main building
|
35 feet or 3 stories maximum
| |
Accessory building
|
15 feet or 1 story maximum
|