Streets, roads or other public thoroughfares
in the borough, whether publicly constructed or privately constructed
for dedication to the borough, shall comply with the specifications
hereinafter set forth.
A. Street widths. Streets, as defined in Chapter
219, Zoning and Land Development, shall have the following rights-of-way and cartways:
|
|
Right of Way
(feet)
|
Cartway
(feet)
|
---|
|
Minor streets
|
50
|
34
|
|
Local feeder streets
|
60
|
40
|
|
Primary collector streets
|
66
|
46
|
B. Construction standards. All streets and roads shall
be constructed, traded and paved in accordance with the following
standards and specifications:
|
Poor Subgrade Soil
|
---|
|
|
All Asphalt
(inches)
|
Combination
(inches)
|
---|
|
Asphalt concrete surface
|
1
|
1
|
|
Asphalt concrete base (1)
|
5
|
2
|
|
Granular base (1) (3)
|
---
|
6
|
|
|
_______
|
_______
|
|
Total
|
6
|
9
|
|
Medium Subgrade Soil
|
---|
|
|
All Asphalt
(inches)
|
Combination
(inches)
|
---|
|
Asphalt concrete surface
|
1
|
1
|
|
Asphalt concrete base (1)
|
3 1/2
|
2
|
|
Granular base (1) (3)
|
---
|
3
|
|
|
________
|
________
|
|
Total
|
4 1/2
|
6
|
|
Good to Excellent Subgrade Soil
|
---|
|
|
All Asphalt
(inches)
|
Combination
(inches)
|
---|
|
Asphalt concrete surface
|
1
|
---
|
|
Asphalt concrete base (1)
|
2 1/2
|
---
|
|
Granular base (1) (3)
|
---
|
---
|
|
|
_______
|
_______
|
|
Total
|
3 1/2
|
---
|
The bearing value of the subgrade shall be determined
either by the CBR (California Bearing Ratio), plate bearing tests
or resistance value or the Engineering Soil Survey of New Jersey,
available from Rutgers University.
In this article the following definitions of
subgrade support are used:
GOOD TO EXCELLENT
Good subgrade soils retain a substantial amount of their
load-supporting capacity when wet. Included are the clean sands and
sand-gravels and those free of detrimental amounts of plastic materials.
Excellent subgrade soils are unaffected by moisture or frost. They
include clean and sharp sands and angular gravels, particularly those
that are well-graded. The CBR value of these soils is normally over
10, R-Value is 62 and above.
MEDIUM
Subgrade soils which retain a moderate degree of firmness
under adverse moisture conditions. Included are such soils as loams,
silty sands and sand-gravels containing moderate amounts of clays
and fine silts. Normally the CBR value of these soils falls in the
range of 5-9, with an R-Vaule ranging from 50-61.
POOR
Subgrade soils, which become quite soft and plastic when
wet. Included are those soils having appreciable amounts of clay and
fine silt. The coarser silts and sandy loams also may exhibit poor
bearing properties in areas where frost penetration into the subgrade
is encountered for any appreciable periods of time. Normally the California
Bearing Ratio (CBR) value of these soils falls in the range of 2-4,
with an R-Value ranging from 25 to 45.