[Code 1971, § 3-45]
Businesses located within shopping centers shall be allowed wall signs only, subject to regulations in sections 3-84 and 3-85. Ground and pole or pylon signs shall not be permitted, except one pylon sign identifying the shopping center only shall be permitted. Signs will follow all rules and regulations of division 4.
[Code 1971, § 3-46]
All signs in industrial areas shall conform to B-1 and B-2 district
regulations.
[Code 1971, § 3-47]
Signs shall be allowed in industrial parks, subject to the following
regulations:
(1)
One sign of the pole or pylon type identifying the industrial park only and not exceeding 100 square feet in area and conforming to section 3-86.
(2)
One sign directing traffic to business locations. Such sign shall
contain equalsized areas not to exceed 12 inches by 72 inches for
each business located within the park.
(3)
Entrance, exit, safety, and other directional signs, as required;
size in accordance with size used for state signs.
(4)
Corporation identification signs, if intended to be seen from any
road outside the park or area, will conform to regulations for business
signs. Other corporate identification signs will be at the discretion
of the corporation but will not extend more than five feet above the
roofline.
