For the purposes of this chapter, the Borough of Summit Hill
is divided into the following districts:
R-1
|
Residential
|
R-2
|
Residential
|
R-3
|
Residential
|
C-1
|
Commercial
|
C-2
|
Commercial
|
M-1
|
Industrial
|
O-S
|
Open Space, Special Use
|
The boundaries of the above districts are delineated on a map
entitled Borough of Summit Hill "Zoning Map," which accompanies and
which, with all explanatory matter thereon, is hereby made a part
of this chapter.
If uncertainty exists as to the boundary of any district shown
on the Zoning Map, the Zoning Hearing Board shall determine the location
of such boundary according to the guidelines set forth below.
Where uncertainty exists as to boundaries of any district as
shown on the Zoning Map, the following guidelines shall apply in determining
the location of such boundary:
A. District boundary lines are intended to follow or parallel the center
line of streets, streams and railroad; and lot or property lines as
they exist on a recorded deed or plan in the County Recorder of Deeds
office at the time of adoption of this chapter, unless such district
boundary lines are fixed by dimensions as shown on the Zoning Map.
B. Where a district boundary line is not fixed by dimensions, and where
it approximately follows lot lines, and where it does not scale more
than 10 feet therefrom, such lot lines shall be construed to be such
boundaries unless specifically shown otherwise.
C. If uncertainty exists as to the boundary of any district shown on
the Zoning Map, the Borough Engineer shall determine the location
of such boundary, paid for by the property owner questioning or contesting
the boundary location.