A.
Freestanding ground signs. These signs shall be architecturally integrated
with the principal building in the following manner and be consistent
with the Village architectural standards, per § 70.133C(3)
of the Zoning Ordinance:
(1)
The base and piers of the sign shall be constructed with the principal
building's primary building material, to the greatest extent
practical.
(2)
The color scheme of the sign shall follow the color scheme of the
principal building, to the greatest extent practical.
(3)
Architectural features (e.g., sills, piers, reveals, capstones, medallions,
etc.) which are part of the architectural style of the principal building
shall be incorporated into the base and piers of the sign, to the
greatest extent practical.
(4)
Neon signs or other exterior neon displays may be permitted in cases
where they are custom designed to be compatible with the building's
architectural character and where their color has been selected to
harmonize with the building's exterior colors. Such lighting shall
be subject to review and approval of the Plan Commission. The Plan
Commission may recommend that the sign be reviewed and approved by
the Architectural Review Board when the sign may affect the architectural
character of the building.
(5)
The sign face shall be constructed with an opaque surface to allow
internal light to project only through the cut-out lettering and/or
logos.
(6)
The Building Inspector and/or Planning and Zoning Administrator,
Plan Commission, or the Architectural Review Board may approve, deny,
or request changes to a proposed sign, based on the architectural
design of that sign.
(a)
Signage proposed for a new or any addition(s) to an existing
building of 20% or more of the existing square footage must be reviewed
by the Plan Commission and Architectural Review Board as part of a
site, building and operation plan review.
(b)
Signage proposed for an existing building without expansion,
if not consistent with the architectural characteristics of the development
and surrounding vicinity or other requirements of this chapter, must
be reviewed by the Architectural Review Board.
C.
Projecting signs. Projecting signs shall complement the scale, proportion
and architectural style of the building to which they are attached,
using letters and/or logos and symbols in character with the overall
design of the building. Lighting shall be cast downward to specifically
illuminate the sign area. Said signage shall not be internally illuminated.[1]
D.
Landscaping standards. Where any sign is proposed to be externally
illuminated using ground-mounted fixtures, where applicable and permitted,
landscape plantings shall be installed to shield the entire light
source from surrounding view. Landscape plantings shall be of the
type as will ensure effective year-round screening.
A.
All signs shall be constructed, erected and maintained to safely
withstand wind pressure as specified by Wisconsin Statutes and applicable
Administrative Code.
B.
The design, construction, and erection of all signs shall be reviewed
by a competent professional in the sign design and construction industry.
C.
Wall signs attached to exterior building walls shall be anchored
or attached in such a manner as will ensure stability and safety.
D.
The owner or representative of any sign greater than 10 feet in height,
prior to sign permit issuance, must submit an analysis of the data
based on the intended height. The information provided to the Building
Inspector shall indicate the structural integrity of the proposed
sign.
The temporary occupancy of a sidewalk or street or other public
property during construction, removal, repair, alteration, or maintenance
of a sign is permitted, provided the space occupied is roped off,
fenced off, or otherwise isolated to prevent hazard to pedestrians
and property.
Supporting members or braces of all signs shall be constructed
of galvanized iron, properly treated wood, steel, or other noncorrosive
incombustible material. All projecting signs, if placed at an angle
to the wall or roof of any building, shall be attached by such noncorrosive
metal bolts, anchors, cable, or other metal attachments as shall ensure
permanent and safe construction and shall be maintained free from
rust or other defects. Every means or device used for attaching any
sign shall extend through the walls or roof of the building, should
the Building Inspector determine that the safe and permanent support
of such sign so requires, and shall be securely anchored by wall plates
and nuts to the inside of the walls or to bearings on the underside
of two or more roof or ceiling joists in accordance with instructions
given by the Building Inspector. Small flat signs containing less
than 10 feet of area may be attached to a building by the use of lag
bolts or other means to the satisfaction of the Building Inspector.
No sign, or any part thereof, or sign anchors, braces, or guide
rods shall be attached, fastened, or anchored to any fire escape,
fire ladder, or standpipe, and no such sign or any part of any such
sign or any anchor, brace, or guide rod shall be erected, put up or
maintained so as to hinder or prevent ingress or egress through a
door, doorway, or window or so as to hinder or prevent the raising
or placing of ladders against a building by the Fire Department as
necessity therefor may require.