Exciting enhancements are coming soon to eCode360! Learn more 🡪
Town of Lowville, NY
Lewis County
By using eCode360 you agree to be legally bound by the Terms of Use. If you do not agree to the Terms of Use, please do not use eCode360.
For the purpose of this chapter, the Town is hereby divided into the following zones:
R-30A
High Density Residential A
R-30B
High Density Residential B
R-30C
High Density Residential C
R-40
Low Density Residential
OC
Open Space and Conservation
AG
Agriculture
CB-R
Commercial/Residential
CB
Commercial
I-1
Industrial
I-2
Highway Industrial
I-3
Industrial/Commerce
PD
Planned Development
The zones are shown, defined and bounded on the Zoning Map accompanying this chapter entitled "Zoning Map," dated April 25, 2013. The Zoning Map is hereby made a part of this chapter and shall be on file in the office of the Town Clerk.[2]
[1]
Editor's Note: Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. I).
[2]
Editor's Note: A copy of the Zoning Map is included as an attachment to this chapter.
Where uncertainty exists with respect to the boundaries of the various zones, as shown on the Zoning Map, the following rules shall apply:
A. 
Where the designation on the Zoning Map indicates a boundary approximately upon a road, the center line of the road shall be construed to be the boundary.
B. 
Where the designation on the Zoning Map indicates a boundary approximately upon a lot line, such lot line shall be construed to be the boundary.
C. 
Distances shown on the Zoning Map are perpendicular distances from road center lines measured to the zone boundary. In all cases where distances are given, zone boundaries are parallel to the road center line.
D. 
In other cases the zone boundary shall be determined by the use of the scale on the Zoning Map.
Where a zone boundary divides a lot of record at the time such boundary is adopted, the zone requirements of the least restrictive portion of such lot shall extend 30 feet into the more restrictive portion of the lot, provided that the lot has frontage on a road in the less restricted zone.
In the event that a metes-and-bounds description has been filed for a zone change or a variance as required by this chapter, such metes-and-bounds description may be used in lieu of other provisions of this article.