(a)
No person shall discharge or cause to be discharged any of the following described waters or wastes to any public sewers or drains:
(1)
Any gasoline, benzene, naphtha, fuel oil, or other flammable or explosive liquid solid or gas.
(2)
Any waters or wastes containing toxic or poisonous solids, liquids, or gases in sufficient quantity, either singly or by interaction with other wastes, to injure or interfere with any sewage treatment process, constitute a hazard to humans or animals, create a public nuisance, or create any hazard in the receiving waters of the sewage treatment plant.
(3)
Any waters or wastes having a pH lower than 5.5 or having any other corrosive property capable of causing damage or hazard to structures, equipment, and personnel of the sewage works.
(4)
Any solid or viscous substances in quantities or of such size capable of causing obstruction to the flow in sewers or other interference with the proper operation of the sewage works. Such items include, but are not limited to, ash, ashes, cinders, sand, mud, straw, shavings, metal, glass, rags, feathers, tar, plastics, wood, unground garbage, whole blood, paunch manure, hair and fleshings, entrails, and paper dishes, cups, milk containers, etc., either whole or ground by garbage grinders.
(5)
Any garbage that has not been properly shredded. The installation and operation of any garbage grinder equipped with a motor of 3/4 of one horsepower (0.76 hp metric) or greater shall be subject to the review and approval of the Director and/or the City Engineer.
(6)
Any liquid or vapor having a temperature higher than 150° F.
(7)
Any waters or wastes containing strong-acid iron-pickling wastes or concentrated plating solutions, whether neutralized or not.
(8)
Any waters or wastes containing iron, chromium, copper, zinc, or similar objectionable or toxic substances; or wastes exerting an excessive chlorine requirement to such degree that any such material received exceeds the limits established by the Director and/or the City Engineer for such materials.
(9)
Any waters or wastes containing phenols or other taste- or odor-producing substances in such concentrations exceeding limits which may be established by the Director and/or the City Engineer, as necessary, to meet the requirements of the state, federal, or other public agencies or jurisdiction for such discharge to the receiving waters.
(10)
Any radioactive wastes or isotopes of such half-life or concentration as may exceed limits established by the Director and/or the City Engineer in compliance with applicable state or federal regulations.
(11)
Any waters or wastes having a pH in excess of 9.5.
(12)
Materials which exert or cause:
a.
Unusual concentrations of inert suspended solids, such as, but not limited to, Fullers earth, lime slurries and lime residues, or of dissolved solids such as, but not limited to, sodium chloride and sodium sulfate.
b.
Excessive discoloration, such as, but not limited to, dye wastes and vegetable tanning solutions.
c.
Unusual BOD, chemical oxygen demand, or chlorine requirements in such quantities as to constitute a significant load on the sewage treatment works.
d.
Unusual volume of flow or concentration of wastes constituting "slugs."
(13)
Waters or wastes containing substances which are not amenable to treatment or reduction by the sewage treatment process employed or are amenable to treatment only to such degree that the sewage treatment plant effluent cannot meet the requirements of other agencies having jurisdiction over discharge to the receiving waters.
(14)
Discretionary clause.
a.
No person shall discharge or cause to be discharged substances, materials, waters, or wastes if it appears likely in the opinion of the Director and/or the City Engineer that such wastes can harm either the sewers, sewage treatment process or equipment, have an adverse effect on the receiving stream, or can otherwise endanger life, limb, public property, or constitute a nuisance.
b.
In forming an opinion as to the acceptability of wastes, the Director and/or the City Engineer will give consideration to factors including, but not limited to, the quantities of subject wastes in relation to flows and velocities in the sewers, the materials of construction of the sewers, the nature of the sewage treatment process, the capacity of the sewage treatment plant, and the degree of treatability of wastes in the sewage treatment plant.