Exciting enhancements are coming soon to eCode360! Learn more 🡪
City of Sikeston, MO
Scott County
By using eCode360 you agree to be legally bound by the Terms of Use. If you do not agree to the Terms of Use, please do not use eCode360.
Table of Contents
Table of Contents
[R.O. 2009 § 17.20.010; Ord. No. 6220, 4-26-2021]
This district is intended to provide for well designed manufactured housing development in areas where public utilities are available and to establish basic standards which will provide the occupants with a suitable living environment and minimize its effect on surrounding properties.
[R.O. 2009 § 17.20.020; Ord. No. 5961 §§I, XIV, 8-25-2014; Ord. No. 6220, 4-26-2021]
A. 
In District "R-6," no manufactured home, building, land or premises shall be erected, constructed, reconstructed, located, relocated or altered except in conformance with the final development plan and one (1) or more of the following uses:
1. 
Single-family, manufactured home Class A units for residential purposes.
2. 
Accessory buildings, clearly subordinate and incidental to the main buildings, any portion of which is not located in a required front yard or within five (5) feet of any other lot line.
3. 
Churches and synagogues.
4. 
Customary home occupations, agricultural uses and signs subject to the restrictions detailed in Section 405.450 for their uses.
5. 
Recreational uses for the exclusive use of the occupants of this district.
[R.O. 2009 § 17.20.030; Ord. No. 5961 §§I, XV, 8-25-2014; Ord. No. 6220, 4-26-2021]
A. 
The following uses may be permitted in District "R-6" after proper application for placement or relocation of manufactured housing on appropriately zoned lots, review and approval pursuant to the provisions of this Section and Article V, Board of Adjustment, of this Chapter:
1. 
Family day-care homes subject to the provisions detailed in Section 405.450.
2. 
Private lakes.
3. 
Buildings end premises for public utility services or public service corporations, whose buildings or uses the Board deems reasonably necessary for public convenience or welfare.
[R.O. 2009 § 17.20.040; Ord. No. 5961 §§I, XVI, 8-25-2014; Ord. No. 6220, 4-26-2021]
A. 
In District "R-6," any building, dwelling or portion thereof hereafter erected, constructed, reconstructed, altered, located or relocated shall be subject to the following regulations: Also See Reference Table 450.1, set out as Exhibit A to this Ch. 405.
1. 
Minimum Tract Size And Location. Not less than five (5) acres in area and under single ownership or unified control. Outer boundaries of the tract shall be not less than twenty-five (25) feet from any public street and not less than fifteen (15) feet from all other property lines.
2. 
Minimum Lot Area. Not less than four thousand (4,000) square feet.
3. 
Minimum Lot Width. Not less than forty-five (45) feet at the building line.
4. 
Minimum setback requirements.
a. 
Front yard: twenty (20) feet.
b. 
Side yard: five (5) feet.
c. 
Rear yard: ten (10) feet.
5. 
Building Height. In District "R-6," no building or manufactured housing unit shall hereafter be erected or structurally altered to exceed one (1) story or sixteen (16) feet in height.
[Ord. No. 5961 §§I, XVII, 8-25-2014; Ord. No. 6220, 4-26-2021]
A. 
All manufactured homes located within the City of Sikeston shall be set upon a permanent foundation properly designed and enclosed in accordance with the International Building Code.
1. 
Manufactured homes shall be attached to a permanent footing, which manner of placement shall be as stated on the building permit, and meet all manufacturer's specifications for support.
a. 
Pier pads are not permitted.
b. 
All footings shall have reinforced steel, as dictated by appropriate building codes.
c. 
A minimum of eighteen (18) inches of crawl space must be maintained under the entire manufactured unit.
B. 
Manufactured home anchors shall be embedded in the footing or foundation to HUD, Missouri Public Service Commission and manufacturer's specifications.
C. 
Within ninety (90) days of the manufactured home's setup, underpinning shall be installed in such a way that all areas directly under the home are enclosed.
1. 
Underpinning shall be similar in appearance to materials used for the siding of the manufactured home to which it is attached.
2. 
Said underpinning/foundation shall have permanently installed venting in accordance with the manufacturer's specifications. Deletions or omissions of vents are not allowed, and homes will not be approved for occupancy without appropriate venting.
[R.O. 2009 § 17.20.050; Ord. No. 6220, 4-26-2021]
All of the provision of Chapter 415, "Subdivisions" of the Sikeston Municipal Code, except as specifically provided for in this Chapter, shall be complied with. The purpose being to ensure that any development within this district meets the minimum requirements for the promotion and preservation of public health, safety and general welfare as provided for in the subdivision ordinance.