A.
Description and purpose. This district is intended to permit very low density single-family detached residential development at a density of one dwelling unit for every 35 gross acres. This district acts as a "holding zone" to preserve productive agricultural lands in the long term, protect existing farm operations from encroachment by incompatible uses, promote further investments in farming, maintain eligibility for farming incentive programs, and to ensure that development does not land-lock the Village.
B.
Uses. For principal and accessory uses permitted by right or as a conditional use and allowable temporary uses, refer to the Table of Land Uses included as an attachment to this chapter. See § 510-38.
C.
Overlay district requirements. All lots, uses, structures, and site features within one or more overlay zoning districts (see Article X) shall be subject to the regulations of the applicable overlay zoning district in addition to those of the underlying standard zoning district. Where there are conflicts between the standard zoning district regulations and the overlay zoning district regulations, the more restrictive requirements shall prevail.
D.
Performance standards. All allowed uses in the RH-35 Zoning District shall comply with applicable performance standards of Article XIII, except for any exemptions specifically stated in this chapter or by any other agency with jurisdiction.
E.
Landscaping regulations. Single-family and agricultural land uses are exempt from landscaping requirements. All other land uses in the RH-35 Zoning District shall adhere to the applicable landscaping requirements (see Article XIV).
F.
Signage regulations. All signs in the RH-35 Zoning District shall comply with applicable provisions of Article XV.
G.
Nonconforming situations. Any nonconforming lot, use, structure and/or site shall adhere to the provisions of Article IX.
H.
Density, intensity, and bulk regulations. Density, intensity, and bulk regulations specific to the RH-35 Zoning District are detailed below. See Articles VII and VIII for additional requirements applicable to all zoning districts.
[Amended 4-17-2023 by Ord. No. 2023-04]
Residential Uses | Nonresidential Uses | ||
|---|---|---|---|
Minimum lot area (square feet) | 40,000 | 40,000 | |
Maximum density | 1 dwelling unit per 35 acres | N/A | |
Maximum building coverage of lot | 30% of net lot area | 30% of net lot area | |
Maximum impervious coverage of lot | 50% of net lot area | 50% of net lot area | |
Minimum lot width (feet) | 150 | 150 | |
Minimum street setback (feet) | 30 | 30 | |
Minimum side setback (feet) | 15 | 15 | |
Minimum rear setback (feet) | 30 | 30 | |
Maximum principal building height (feet) | 35 | 40 | |
Minimum principal building separation (multi-structure developments on shared lots) (feet) | 30 | 30 | |
Minimum pavement setback (lot line to pavement; excludes driveway entrances) (feet) | 5 | 5 | |
Minimum parking required | Per Article VI | Per Article VI | |
Minimum garage door setback to alley (if applicable) (feet) | 15 | 15 | |
Accessory structures | Refer to § 510-47A(7)(b) for additional requirements | ||
Accessory building setback to principal building (feet) | 10 | 10 | |
Accessory building side setback (feet) | 5 (less than 200-square-foot structure) 10 (more than 200-foot structure) | 5 (less than 200-square-foot structure) 10 (more than 200-foot structure) | |
Accessory building rear setback (feet) | 5 (less than 200-square-foot structure) 10 (more than 200-foot structure) | 5 (less than 200-square-foot structure) 10 (more than 200-foot structure) | |
Maximum accessory building height (feet) | 20 | 40 | |
Maximum area of attached garage | 70%, except as allowed in § 510-58.1 | ||