[Ord. No. 2634 §6.1, 3-12-1992]
A. For
final plan approval, the subdivider shall submit to the Commission:
1. A transparent reproduction of an acceptable medium and six (6) blueprints
or black line copies of the final plan.
2. Six (6) certified copies of the improvement plan containing all profiles,
cross sections and specifications.
3. The filing fee as required by Section
415.320.
4. A performance guarantee as required by Section
415.330 and approved by the City Attorney.
5. A maintenance guarantee as required by Section
415.340.
6. A certificate from the administrative officer that the final plan
is in accordance with the preliminary plan as approved by the Commission
and Board of Aldermen.
[Ord. No. 2634 §6.2, 3-12-1992]
A. In
addition to the information required for the preliminary plan, the
final plan shall include all of the following information unless specifically
waived by the Commission:
1. The sheet size of the final plat and improvement plan shall measure
no less than eighteen (18) inches by eighteen (18) inches and no larger
than thirty-six (36) inches by thirty-six (36) inches. In the event
the sheet size of the final plat exceeds twenty-four (24) inches by
twenty-four (24) inches, the subdivider shall also provide a reproducible
copy of the original final plat at a maximum sheet size of twenty-four
(24) inches by twenty-four (24) inches or whatever the County Recorder
of Deeds will accept.
2. The final plat shall be prepared by a registered land surveyor and
contain the date, title, graphic scale, north arrow, name and location
of the subdivision and the names and addresses of the owner, subdivider
and surveyor. All dimensions, angles, bearings and similar data shall
be related to primary control points. Locations and descriptions of
said control points shall be given. Except as otherwise approved by
the City Engineer or similar official, the control points shall be
located at section corners of the Township and Range grid for the
State of Missouri. All contours, grades and elevations shall use the
U.S.G.S. datum plane and shall be designated on the final plat.
3. The improvement plans shall be prepared by a registered professional
engineer and shall contain specifications, construction details and
profiles and cross sections (vertical scale of no greater than twenty
(20) feet to one (1) inch) for all proposed improvements. If the improvements
or any part thereof have been installed prior to submission of the
final plan, the certificate of a registered professional engineer
stating that improvements have been installed in conformance with
the requirements of this Chapter shall be submitted with the final
plan.
4. Accurate boundary lines with dimensions and bearings or angles that
provide a survey of the tract with an error of closure of not more
than one (1) foot in five thousand (5,000) feet. The survey shall
also provide a description of the location of all property corners.
5. Accurate distances and directions to the nearest established street
corner or official monument. Reference corners shall be accurately
described upon the final plat.
6. The property lines and number assigned to all lots with accurate
dimensions, bearings and curve data, including radii, arcs and chords,
points of tangency and central angles.
7. The building setback lines and dimensions for all front and side
yards.
8. All deed restrictions that shall accompany the land and become covenants
in the deeds for lots.
9. The location, purpose and dimensions of all proposed lots, streets,
building lines, easements, rights-of-way, rights of egress and ingress
and the proposed use of all lots, including non-residential and/or
public and common usage.
[Ord. No. 2634 §6.3, 3-12-1992]
A. The
final plan, to include the final plat and improvement plans, shall
be submitted to the City Clerk for transmittal to the Commission for
final approval. The City Clerk shall submit the final plan to the
Commission upon payment of the filing fee.
B. If
the final plan is approved by the Commission, it shall bear the signature
of the Chairman or Secretary of the Commission. If said final plan
is disapproved by the Commission, the reason for disapproval shall
be written into the record of the Commission and forwarded with the
final plan. After review by the Commission and the City Engineer or
similar official, the final plan shall be returned to the City Clerk
for submission to the Board of Aldermen with all recommendations of
the Commission attached thereto.
C. After
the Board of Aldermen has reviewed the final plan, the City Clerk
shall attach to a copy of the plan a certified copy of the Board's
ordinance approving or disapproving the final plan. If said final
plan is disapproved by the Board of Aldermen, the reasons for disapproval
shall be attached to the final plan.
D. The
approval of the final plat by the Board of Aldermen shall be indicated
on the document to be filed for record by affixing the signatures
of the Mayor and City Clerk. The approved final plan shall be returned
to the City Clerk to be held until such time as the subdivider:
1. Posts the performance guarantee required by Section
415.330.
2. Provides a maintenance guarantee required by Section
415.340.
3. Purchases a construction permit required by Section
415.350.
4. Provides a statement certified by the County Recorder that the final
plat has been recorded in the office of the County Recorder.