[R.O. 1996 § 410.430; Code 1985,
§ 57.10(1); CC 1990 § 13-151]
An adequate and safe sewerage system
shall be provided in all mobile home and travel trailer parks for
conveying and disposing of all sewage. Such system shall be designed,
constructed and maintained in accordance with State and local laws.
[R.O. 1996 § 410.440; Code 1985,
§ 57.10(2); CC 1990 § 13-152]
A.
A sanitary station shall be provided consisting
of at least a tapped four-inch sewer riser pipe, connected to the
travel trailer parking area sewerage system, surrounded at the inlet
end by a concrete apron sloped to the drain, and provided with a suitable
hinged cover; and a water outlet with the necessary appurtenances,
connected to the parking area water supply system to permit periodic
wash down of the immediate adjacent areas.
B.
Each travel trailer parking area shall
be provided with a sanitary station in the ratio of one (1) for every
one hundred (100) trailer spaces or fractional part thereof.
C.
Sanitary stations shall be screened from
other activities by visual barriers such as fences, walls or natural
growth and shall be separated from any trailer space by a distance
of at least fifty (50) feet.
[R.O. 1996 § 410.450; Code 1985,
§ 57.10(3); CC 1990 § 13-153]
All sewer lines in both mobile home
and travel trailer parks shall be located in trenches of sufficient
depth to be free of breakage from traffic or other movements and shall
be separated from the water supply system at a safe distance. Sewers
shall be at a grade which will ensure a velocity of two (2) feet per
second when flowing full. All sewer lines shall be constructed of
materials approved by the City Engineer, shall be adequately vented
and shall have watertight joints.
[R.O. 1996 § 410.460; Code 1985,
§ 57.10(4); CC 1990 § 13-154]
A.
Individual sewer connections shall be provided
and the following requirements shall apply:
1.
The sewer riser pipe shall have at
least a four-inch diameter, shall be trapped below the ground surface
and shall be so located on the trailer space that the sewer connection
to the trailer drain outlet will approximate a vertical position.
2.
The sewer connection (see definition)
shall have a nominal inside diameter of at least three (3) inches,
and the slope of any portion thereof shall be at least one-fourth
(1/4) inch per foot. The sewer connection shall consist of one (1)
pipe line only without any branch fittings. All joints shall be watertight.
3.
All materials used for sewer connections
shall be corrosive resistant, non-absorbent and durable. The inner
surface shall be smooth.
4.
Provision shall be made for plugging
the sewer riser pipe when a trailer does not occupy the space. Surface
drainage shall be diverted away from the riser.
[R.O. 1996 § 410.470; Code 1985,
§ 57.10(5); CC 1990 § 13-155]
No liquid wastes from sinks shall
be charged onto or allowed to accumulate on the ground surface.
