[R.O. 2013 §410.290; CC 1991 §405.300; CC §43.500]
The final plat shall be clearly and legibly drawn to a scale
of one (1) inch to one hundred (100) feet or less as approved by the
City Engineer and in ink on tracing cloth.
[R.O. 2013 §410.300; CC 1991 §405.310; CC §43.510]
A.
The
final plat requirements shall be as follows:
1.
The title under which the subdivision is to be recorded.
2.
The name or names of the owners and subdividers.
3.
The date, scale and north point, and a key map showing the general
location of the proposed subdivision.
4.
The legal description of the area being platted, including the block,
section, United States survey or part thereof.
5.
Accurate distances and bearings of all boundary lines of the subdivision
including all sections, quarter sections, United States Survey and
Congressional township lines.
6.
Centerlines of all proposed and adjoining streets with their right-of-way
widths and names.
7.
Lines of all lots with a simple method of numbering to identify all
lots and blocks.
8.
All building lines and all easements provided for public service
together with their dimensions and any limitations of the easements.
9.
Any and all dimensions necessary for accurate location of the boundaries
of the site to be developed and of all streets, lots, easements and
dedicated areas. These dimensions shall be expressed in feet and decimals
of a foot.
10.
All radii, arcs, point of tangency, central angles and lengths of
curves.
11.
Certification by a registered land surveyor that the final plat as
shown is a correct representation of the survey as made.
12.
All survey monuments and benchmarks, together with their description.
13.
Private restrictive covenants and their period of existence.
14.
The accurate outline, dimensions and purposes of all property which
is offered for dedication or is to be reserved for acquisition for
public use, or is to be reserved by deed covenant for the common use
of the property owners in the subdivision.
