A.
An installation permit issued pursuant to this chapter shall be obtained for each new installation of liquefied petroleum gas employing a container or an aggregate of interconnected containers of over 2,000 gallons' water capacity and for each permanent installation, irrespective of size of containers, made at buildings designated as places of public assembly and for retail propane filling stations. Prior to making such an installation, the installer shall submit plans to the Fire Marshal, and if compliance with requirements of this chapter is shown by said plans, a permit shall be issued.
B.
Installers shall maintain a record of all installations for which a permit is not required by Subsection A above (but not including installation of gas-burning appliances and replacing of portable cylinders) and have it available for inspection by the Fire Marshal.
C.
An operational storage permit issued pursuant to this chapter shall be obtained for each installation of liquefied petroleum gas employing a container or an aggregate of interconnected containers where the total storage capacity is in excess of 2,000 gallons' water capacity and for retail propane filling stations. All such storage locations shall be maintained in accordance with the New York State Fire Prevention and Building Code, applicable provisions of the NFPA and permit conditions as issued by the Town of Riverhead.
[Amended 7-19-2005 by L.L. No. 25-2005]