[Ord. 2125, 7/14/2014]
The following items shall be included in the SWM site plan:
A. Appropriate sections from the municipal Subdivision and Land Development
Ordinance, and other applicable local ordinances, shall be followed
in preparing the SWM site plans. In instances where the municipality
lacks subdivision and land development regulations, the content of
SWM site plans shall follow the county's Subdivision and Land Development
Ordinance.
B. The municipality shall not approve any SWM site plan that is deficient
in meeting the requirements of this Part. At its sole discretion and
in accordance with this Subpart D, when an SWM site plan is found
to be deficient, the municipality may either disapprove the submission
and require a resubmission; or in the case of minor deficiencies,
the municipality may accept submission of modifications.
C. Provisions for permanent access or maintenance easements for all
physical SWM BMPs, such as ponds and infiltration structures, as necessary
to implement the operation and maintenance (O&M) plan discussed
in Subsection E(9) below.
D. The following signature block for the municipality:
"(Municipal official or designee), on this date (date of signature),
has reviewed and hereby certifies that the SWM site plan meets all
design standards and criteria of Municipal Ordinance No. 2125."
E. The SWM site plan shall provide the following information:
1. The overall stormwater management concept for the project.
2. A determination of site conditions in accordance with the BMP Manual.
A detailed site evaluation shall be completed for projects proposed
in areas of carbonate geology or karst topography, and other environmentally
sensitive areas, such as brownfields.
3. Stormwater runoff design computations, and documentation as specified
in this Part, or as otherwise necessary to demonstrate that the maximum
practicable measures have been taken to meet the requirements of this
Part, including the recommendations and general requirements in § 221.
4. Expected project time schedule.
5. A soil erosion and sediment control plan, where applicable, as prepared
for and submitted to the approval authority.
6. The effect of the project (in terms of runoff volumes, water quality,
and peak flows) on surrounding properties and aquatic features and
on any existing stormwater-conveyance system that may be affected
by the project.
7. Plan and profile drawings of all SWM BMPs, including drainage structures,
pipes, open channels, and swales.
8. The SWM site plan shall show the locations of existing and proposed
on-lot wastewater facilities and water supply wells.
9. The SWM site plan shall include an O&M plan for all existing
and proposed physical stormwater management facilities. This plan
shall address long-term ownership and responsibilities for O&M
as well as schedules and costs for O&M activities.
[Ord. 2125, 7/14/2014]
A modification to a submitted SWM site plan that involves a
change in SWM BMPs or techniques, or that involves the relocation
or redesign of SWM BMPs, or that is necessary because soil or other
conditions are not as stated on the SWM site plan as determined by
the municipality, shall require a resubmission of the modified SWM
site plan in accordance with this Subpart D.
[Ord. 2125, 7/14/2014]
A disapproved SWM site plan may be resubmitted, with the revisions
addressing the municipality's concerns, to the municipality in accordance
with this Subpart D. A resubmission fee must accompany a resubmission
of a disapproved SWM site plan.
[Ord. 2125, 7/14/2014]
The municipality's approval of an SWM site plan authorizes the
regulated activities contained in the SWM site plan for a maximum
term of validity of five years following the date of approval. The
municipality may specify a term of validity shorter than five years
in the approval for any specific SWM site plan. Terms of validity
shall commence on the date the municipality signs the approval for
an SWM site plan. If an approved SWM site plan is not completed according
to § 237 within the term of validity, then the municipality
may consider the SWM site plan disapproved and may revoke any and
all permits. SWM site plans that are considered disapproved by the
municipality shall be resubmitted in accordance with § 235
of this Part.
[Ord. 2125, 7/14/2014; as amended by Ord. No. 2217, 9/12/2022]
1. The developer shall be responsible for providing as-built plans of
all SWM BMPs included in the approved SWM site plan. The as-built
plans and an explanation of any discrepancies with the construction
plans shall be submitted to the municipality.
2. The as-built submission shall include a certification of completion
signed by a qualified professional verifying that all permanent SWM
BMPs have been constructed according to the approved plans and specifications.
The latitude and longitude coordinates for all permanent SWM BMPs
must also be submitted, at the central location of the BMPs. If any
licensed, qualified professionals contributed to the construction
plans, then a licensed, qualified professional must sign the completion
certificate.
3. After receipt of the completion certification by the municipality,
the municipality may conduct a final inspection.