The R-2 Single-Family and Two-Family Residential District is
intended to provide for single-family, two-family, and low intensity
multiple-family dwellings set in a medium density living environment.
Nonresidential uses permitted in the R-1 Single-Family Residential
District are also permitted in this district. Residential densities
of not more than 10 units per acre are permitted in this district.
[Amended 11-25-2019 by Ord. No. 259]
The following uses are permitted in the R-2 Medium Density Residential
District:
A.
Any permitted use in the R-1 Low Density Residential District;
B.
Single-family attached dwellings, not to exceed four units per structure;
C.
Two-family dwellings;
D.
Single-family detached bungalow courts;
E.
Fourplexes;
F.
Small multiplexes that maximize at eight dwelling units per building;
and
G.
All accessory uses customarily associated with the above uses.
C.
Personal service establishments, including barber/beauty shops, health
salons, in conjunction with any of the uses permitted in this section.
D.
Hospitals, and convalescent and retirement homes, except those dedicated
solely to the treatment of criminals, or persons with mental illness,
subject to the following conditions:
(1)
All such hospitals shall be developed on sites consisting of
at least 10 acres.
(2)
Ambulance and delivery services shall be obscured from all residential
views, utilizing a method approved by the Planning Commission.
(3)
Ingress/egress for hospital uses shall be provided from a major
thoroughfare.
(4)
Convalescent and retirement homes shall be so developed so as
to create a building to land ratio not less than 1,500 square feet
of space per one bed/bedroom.
(5)
No building shall be closer than 40 feet from any property line.
[1]
Editor’s Note: Former § 370-144, Height regulations,
and 370-145, Area, width, and yard setback regulations, were repealed
11-25-2019 by Ord. No. 259.