The purposes of this district are to provide for continued high-density,
single-family residential development; to preserve existing single-family
development; and to provide for and regulate certain uses permitted
by special exception.
Land, building or premises shall be used by right only for one
or more of the following uses:
A.
All uses permitted by right in the R-1 District.
The following shall be permitted as conditional uses only, subject to Article XXII and the provisions cited below:
Unless specifically stated otherwise, the following shall be
minimum requirements:
A.
Single-family detached dwelling.
(1)
Lot size: 5,000 square feet.
(2)
Lot width: 50 feet.
(3)
Building coverage: 35%, maximum.
(4)
Street frontage: 50 feet, and 35 feet at cul-de-sac turns.
(5)
Impervious surface: 55%, maximum.
(7)
Side yards: 20 feet, aggregate, and eight feet, minimum.
(8)
Rear yard: 20 feet.
(9)
Height: two stories, maximum, and 35 feet, maximum.
If a homeowners' association is required for any development located within the R-3 District, it shall adhere to the requirements of § 600-179.