The definitive plan submission shall consist of the definitive
plan and required supplemental information as follows:
A. Definitive plan.
(1) The definitive plan shall be prepared by a Massachusetts registered
professional engineer and Massachusetts registered professional land
surveyor and shall be clearly and legibly drawn at a scale of one
inch equals 40 feet in black permanent ink upon sheets of tracing
cloth or plan original 24 inches by 36 inches, with three-fourths-inch
borders, except the left border which shall be 1 1/2 inches.
(2) The definitive plan shall consist of at least five separate sheets
as follows:
(c)
A topographic, utilities, grading and drainage plan.
(d)
A layout plan and profile.
(3) All sheets making up the definitive plan shall contain the following:
(a)
Title (subdivision name), date of preparation and scale.
(b)
Name of owner of record and of applicant if other than owner
of record.
(c)
Name and address of the Massachusetts registered professional
land surveyor and Massachusetts registered professional engineer.
(d)
Certificates and seals of the Massachusetts registered professional
engineer and Massachusetts registered professional land surveyor who
prepared the sheet (including topographic information).
(e)
Certificate by the Massachusetts registered professional land
surveyor that all surveying conforms to the requirements of the Massachusetts
Land Court (not required on index sheet or detail sheet).
(f)
Certificate by the Massachusetts registered professional land
surveyor that all surveying conforms to the current requirements of
the Massachusetts Board of Registration of Professional Engineers
and Land Surveyors as described in 250 CMR 6.00, procedural and technical
standards for the practice of land surveying (not required on index
sheet or detail sheet or sheets without survey information).
(g)
Suitable space to record the action of the Board and the signatures
of the members of the Board on each sheet of the definitive plan.
(h)
Revision block suitable to record and describe revisions made
to the plan.
(4) The subdivision plan shall contain the following:
(b)
Existing and proposed lines of streets, house numbers of existing
houses, rights-of-way, easements, and any public or common areas within
the subdivision. (The proposed names of proposed streets will be shown
in pencil until they have been approved by the Board.)
(c)
Location, names and present widths of adjacent streets or of
streets approaching or within reasonable proximity of the proposed
subdivision.
(d)
A locus plan at a scale of one inch equals 800 feet showing
the relationship between the subdivision and adjoining property within
a radius of 1/4 mile of the proposed subdivision.
(e)
Names of all owners of abutting land as determined from the
most recent local tax list, including owners of land separated from
the subdivision only by a street.
(f)
All lots with lot numbers designated numerically and in sequence.
The applicable minimum front, side and rear yard depth of each lot
as required by the Zoning Bylaw shall be shown by a dashed line.
(g)
Sufficient data including lengths, bearings, radii and central
angles to determine the exact location, direction and length of every
street line, lot line and boundary line and sufficient survey data
referred to existing permanent monuments such that these lines may
be readily established on the ground.
(h)
The Board, where it deems necessary, may require a permanent
elevation bench mark.
(i)
Location of natural waterways and water bodies within and adjacent
to the subdivision.
(j)
Location of existing or proposed paths, sidewalks, roads, and
rights-of-way over and across the subdivision.
(k)
The limit of previous approval by the Planning Board and the
date of such approval. If the subdivision adjoins a public way it
shall be so designated.
(l)
Zoning classification of the land shown on the plan and the
location of any zoning district boundaries that may lie within the
locus of the plan.
(m)
Location of all proposed survey monuments for the subdivision.
(n)
If the property that comprises the subdivision or any part thereof
has been examined, approved and confirmed by the Massachusetts Land
Court, such information shall be noted on the plan with case numbers
and other pertinent references, and the same requirement shall apply
to any abutting parcels of the applicant.
(o)
Identify any area(s) within the locus which lie(s) within a
Floodplain and Watershed Protection District or any other zoning overlay
district.
(p)
Items contained in Subsection
A(3) above.
(5) The topographic, utilities, grading and drainage plan shall contain
the following:
(a)
Location of all permanent monuments, identified as to whether
existing or proposed, natural objects such as waterways, wetlands,
detention ponds, trees over 12 inches in diameter, drainage courses,
large boulders or ledge outcroppings, stone walls, fences, buildings,
retaining walls, existing on-site disposal systems on the property
or within 50 feet of any proposed drains, one-hundred-year floodplain
and the like.
(b)
Locations of all proposed streets, lot lines and easements.
(c)
Existing and proposed contours, developed on NGVD base, at two-foot
intervals. Existing contours and detail shall meet National Map Accuracy
Standards for maps of one inch equals 40 feet. Where aerial photogrammetry
is used, check sections shall be taken and provided to demonstrate
map accuracy. Existing topographic information shall be based on recent
on the ground survey under the supervision of the registered professional
whose stamp is on the plan.
(d)
Location of all drainage structures with existing and proposed
spot grades where drainage meets existing conditions.
(e)
There shall also be shown any alteration of the pattern and
disposition of drainage without regard for its source. Direction and
size of all drainage culverts, open ditches and the like must be indicated.
(f)
Location of surface and subsurface explorations on the tract,
location and results of tests made to ascertain subsurface soil, rock
and groundwater conditions, depth of groundwater and the probable
area of disposal systems shall be indicated.
(g)
Location of existing or proposed municipal services.
(h)
Location of all proposed haul roads to be used during subdivision
construction.
(i)
Items contained in Subsection
A(3) above.
(6) The layout plan and profile shall contain the following:
(a)
A separate plan for each proposed street and easement, including
bridges, in the subdivision, at a horizontal scale of one inch equals
40 feet, showing for each such proposed street or easement: side lines,
center line, points of tangency, length of tangents, length of curves,
intersection angles, radii of curves, and the location of proposed
and existing permanent monuments and bench marks, together with all
lot lines, buildings and other major features within 40 feet of the
exterior lines of such street or easement. The layout plan shall also
show the size, material and location of all proposed drains, proposed
water mains, other existing and proposed municipal services and proposed
sewers within the street, together with their appurtenances.
(b)
The items above shall be supplemented where necessary by lines
on the plan showing the width and location of proposed roadways, planting
strips, gutters, light fixtures, hydrants, sidewalks, guardrails and
similar physical features. Directly above or below the plan of each
proposed street or easement, a profile shall be drawn at a horizontal
scale of one inch equals 40 feet and a vertical scale of one inch
equals four feet showing for such street or easement existing center-line
grades in fine black solid line, existing exterior left side line
in fine black short dash line, existing exterior right side line in
fine black long dash line, and proposed finished center-line grades
in heavy solid line. Proposed and existing grade elevations shall
be shown by figures at beginning and end of the street or easement
at fifty-foot station intervals and at the beginning and end of all
vertical curves. Proposed stations and station equations shall be
shown by figures at the beginning and end of the street or easement.
Rates of gradient in percentage shall also be shown. All elevations
shall refer to National Geodetic Vertical Datum (NGVD). Profiles shall
also indicate the location of any intersecting public or private ways,
and the location of existing and proposed storm drains, including
water mains, sewers, or other municipal services and their appurtenances,
invert locations of all manholes, pipe ends, catch basins and changes
in slope. Existing septic systems within 50 feet of the edge of the
roadway layout shall also be shown.
(c)
On the same sheet or on a separate sheet, there shall be drawn
cross sections of the proposed street, properly located and identified
by station number, at such intervals along the street as will indicate
adequately any variations in its section.
(d)
Items contained in Subsection
A(3) above.
(7) The cover sheet shall consist of:
(a)
A locus plan at a scale of one inch equals 800 feet showing
the relationship of the subdivision to adjoining property within a
radius of 1/4 mile of the proposed subdivision.
(b)
An index of other sheets in the plan.
(c)
A space reserved for revision dates on the sheet.
(d)
A statement under the space for revision dates as follows: "The
latest revised date contained in this set of plans is (date)."
(e)
If the entire site cannot be shown on one sheet, an index plan
shall be drawn on the cover sheet (or on a separate sheet) at a scale
agreed to by the Board. The index plan shall show lots, streets and
street stationing conforming to the layout plan and profile. The identity
of lots by house number should also be shown if available.
(8) The detail sheet shall contain details indicating the proposed construction
of all catch basins, manholes, channels, swales, headwalls, endwalls,
flared ends, hydrants, roadways, sidewalks, bikeways and all other
improvements required by these regulations and by the Planning Board.
B. Required supplemental information for a definitive plan submission.
(1) Environmental impact and evaluation statement. The applicant shall
also submit with the definitive plan 20 copies of an environmental
impact statement, the purpose of which is to enable the Board to determine
the methods which are to be used by the applicant to promote the environmental
health of the community and to minimize adverse effects on the natural
resources of the Town. In preparing the statement, the applicant should
refer to the Soil Survey Maps and Manual, by the Natural Resources
Conservation Service, United States Department of Agriculture, for
this Town. The statement should include specific references to the
appropriate plans and maps. The statement should be a technical document
with references for all comments whenever possible. In reviewing the
statement, the Board strongly encourages the applicant to consider
the health and safety of the inhabitants of the area; the degree to
which water is recycled back into the ground; the effect on flow and
quality of surface and ground waters; the effect of drainage upon
adjacent properties; the preservation or promotion of wildlife refuges,
historic sites, and unique geological, botanical and archaeological
features; existing or potential trails and accesses to open space
areas; and the extent to which the design utilizes natural features
and orientation to foster energy-conscious design. The Planning Board
may waive any section, or sections, of the statement which it deems
inapplicable to the proposed project. The developer should discuss
the requirements with the Board prior to the submission of a definitive
plan. The statement shall include the following:
(a)
Physical environment.
[1]
Describe the general physical conditions of the site, including
amounts and varieties of vegetation, general topography, unusual geologic,
scenic and historical features, trails and open space links, and indigenous
wildlife.
[2]
Describe how the subdivision will affect these features.
[3]
Provide a complete physical description of the subdivision and
its relationship to surrounding area.
(b)
Surface water and soils.
[1]
Describe location, extent and type of existing watercourses,
ponds, vernal pools and wetlands, including existing surface drainage
characteristics, both within and adjacent to the subdivision, noting
any current problems in the area.
[2]
Describe the methods to be used during construction to control
erosion and sedimentation, i.e., use of sediment basins and type of
mulching, matting, or temporary vegetation; describe approximate size
and location of land to be cleared at any given time and length of
time of exposure; covering of soil stockpiles; and other control methods
used. Evaluate effectiveness of proposed methods on the site and on
the surrounding areas.
[3]
Describe the permanent methods to be used to control erosion
and sedimentation, including a description of:
[a] Any areas subject to flooding or ponding;
[b] Proposed surface drainage system;
[c] Proposed land grading and permanent vegetative
cover;
[d] Methods to be used to protect existing vegetation;
[e] The relationship of the development to the topography;
[f] Any proposed alterations of shore lines, marshes
or seasonal wet areas;
[g] Any existing or proposed flood control or wetland
easements; and
[h] Estimated increase of peak runoff caused by altered
surface conditions, and methods to reduce runoff by allowing surface
water to seep into the ground.
[4]
Describe sewage disposal methods. Evaluate impact of disposal
methods on surface water, soils, and vegetation.
[5]
Provide complete drainage calculations for the proposed subdivision
and off-site drainage improvements, if any; calculations to include:
[a] Topographic map showing all watershed areas referred
to in the drainage calculations, the subdivision perimeter, the subdivision
streets, and drainage structures.
[b] Drainage calculations for development.
[c] Other information necessary to check the adequacy
of the drainage design proposed and the impact of this design, both
upstream and downstream of the subdivision.
(c)
Subsurface conditions. A report on soil testing performed and
prepared by a Massachusetts registered professional engineer. The
purpose of the report shall be to supply soil data to the Planning
Board and assist in evaluating the design of the subdivision. The
report shall include the location of observation pits. Logs of such
observation pits shall be taken in accordance with the regulations
concerning pits as required in 310 CMR 15.00 of the Massachusetts
Sanitary Code, Subsection 15.102(3), Deep Observation Holes, prior
to submission of the definitive plan.
[1]
Describe any limitations on proposed subdivision caused by subsurface
soil and water conditions, and methods to be used to overcome them.
[2]
Provide logs and findings from soils tests and observation pit
excavations conducted on the site. At least one observation pit per
200 feet of road along the center line of road shall be dug and logged.
The observation pits have the purpose of supplying soil data to the
Planning Board to assist in evaluating the design and construction
cost of a subdivision. A log of such observation pits shall be taken,
in accordance with the applicable sections of regulations concerning
such pits as contained in 310 CMR 15.102 to 15.105 (the State Environmental
Code, Title 5), as amended, prior to submission of the definitive
plan. The minimum depths of such pits shall be as follows:
[a] Cut sections: five feet below proposed finished
grade or to bedrock, whichever is less.
[b] Fill sections: eight feet below existing grade
or to bedrock, whichever is less, except in unstable soils (i.e.,
peat, muck, etc.) where the minimum depth shall be five feet below
hard bottom.
[3]
Evaluate impact of sewage disposal methods on quality of subsurface
water and increase/decrease in the elevation of existing water table.
(d)
Town services.
[1]
Describe estimated existing and proposed traffic flow at peak
periods and proposed circulation pattern and impact on area within
1,000 feet of the subdivision.
[2]
Provide at least one sketch plan of the site and abutting properties
within a minimum of 1,000 feet of the site whether or not owned by
the applicant showing possible or prospective street layouts for such
adjacent land.
[3]
Describe locations and number of vehicles accommodated in parking
areas.
[4]
Describe effect of subdivision on police and fire protection
services.
[5]
Describe effect of subdivision on Department of Public Works
services, including existing streets and storm drainage facilities.
[6]
Describe effect of subdivision on educational services.
[7]
Describe the effect of the subdivision on the Town water supply
and distribution system.
[8]
Describe the effect of the subdivision on Town parks, playgrounds
and recreational facilities.
(e)
Human environment. Provide a tabulation of proposed buildings
by type, size (number of bedrooms, floor area), ground coverage, and
a summary showing the percentage of the tract to be occupied by buildings,
parking and other paved vehicular areas and usable open space.
(f)
General impact. Summarize environmental impact on entire Town
with supporting reasons.
C. Other required field work. To facilitate the review of the definitive
plan submission, the applicant shall stake the center line of the
proposed roadway at one-hundred-foot intervals. The applicant shall
also stake locations and elevations of all drainage structures such
as flared ends and headwalls that must meet existing grades. Other
areas sensitive to the design evaluation may be required to be staked
after review of plans by the Board.
No modification, amendment, change or alteration shall be made in an approved definitive plan unless made in accordance with MGL c. 41, §§ 81O and 81W. For the purposes of this section, the definitive plan shall be defined to include without limitation all elements listed under §
325-18, Definitive plan submission contents, of these regulations. Any alteration in grades, drainage plans or other utilities shall constitute a change in the definitive plan.
Where the Planning Board has disapproved a definitive plan submission
for stated reasons, the applicant may submit an amended plan which
purports to address the reasons for disapproval. Submission of such
an amended plan shall be governed by the provisions of this section.
A. The applicant shall submit an amended plan within 20 days after the
decision of the Board to disapprove the definitive plan has been filed
with the Town Clerk.
B. An amended plan under this section shall comply in all respects with the rules and regulations governing submission of a definitive plan as set forth in Article
IV et seq. herein, including, without limitation, the filing of the required application and payment of all fees and deposits.
C. The Planning Board may, at its discretion, waive strict compliance
with these rules and regulations. Where an amended plan has been submitted
under this section, the Board should avoid unnecessary duplication
of plans and/or supplemental information whenever possible.
D. Any submission made under the provisions of this section shall be
governed by the rules and regulations, bylaws, and statutes in effect
at the time the amended plan is submitted.
Before the Board will release the interest of the Town in the
performance guarantee, the applicant shall file with the Board the
following:
A. A certified copy of a separate layout plan and profile (with accompanying
cross sections and profile) showing as-built location for each street
and easement in the subdivision (or, in the case of approval with
covenant, of the street or streets serving the lots for which a release
is desired). Certification shall be by the Massachusetts registered
professional engineer and Massachusetts registered professional land
surveyor employed by the applicant at his own expense, and shall indicate
that all easements, streets, sidewalks, sewers, storm drains and water
mains and their appurtenances have been constructed in accordance
with the lines and grades of said plan and are accurately located
as shown thereon. Said plan shall be suitable for recording in the
Norfolk Registry of Deeds and shall conform to applicable layout plan
and profile requirements of these regulations.
B. A statement in writing from the Board or its agent that all work
under its jurisdiction required by these rules and regulations has
been inspected and completed in each street in the subdivision (or
in the street or streets serving the lots covered by the surety),
including but not limited to storm drains, bridges and sidewalks,
and that it has approved the construction and materials used in the
performance of such work.
C. A statement in writing from the Water Department and Sewer Department
that they have inspected and the applicant has completed each water
main and sanitary sewer and their appurtenances in accordance with
their requirements and that they have approved the construction and
materials used in the performance of such work.
D. A written certification by the Board of Public Health that any requirements
of the Board of Public Health contained or referred to in the definitive
plan have been met.
[Amended 5-24-2021 ATM by Art. 28]
E. Copies of or reference to the necessary instruments, executed by
the applicant, transferring to the Town all utilities and easements
as shown on the definitive plan unless this requirement is modified
under the terms of definitive plan approval.