As used in this article, the following terms shall have the
meanings indicated:
MANUFACTURED HOME
A structure which complies with the standards set forth in
24 CFR Part 3280, designed to be used as a dwelling with or without
a permanent foundation when connected to the required utilities, and
includes the plumbing, heating, air-conditioning and electrical systems
contained therein.
[Amended at time of adoption of Code (see Ch. 1, General
Provisions, Art. II)]
No manufactured home may be placed in the City of Reedsburg
without first obtaining from the Building Inspector a building permit.
Said permit shall cover all on-site activities, including, where applicable,
the following: foundation; electrical hook-up; connection to water
and sewer systems; installation of exit platforms and stairs; and
any additions or garages that will be constructed on site. Fees for
the permit shall be according to the current City Fee Schedule on
file in the City’s offices or available on the City’s
website.
All on-site construction related activities pertaining to a
manufactured home for which a building permit is issued shall conform
to the applicable requirements of Chs. SPS 320-325, Wis. Adm. Code.
Every manufactured home for which a permit is issued shall have
at least one exit door which has a system of landings and stairs which
meet the requirements of § SPS 321.04, Wis. Adm. Code. Every
other exterior door, whether one or more, shall have, at a minimum,
a landing which complies with § SPS 321.04, Wis. Adm. Code.
No manufactured home may be occupied until the Building Inspector
is satisfied that the requirements of this article have been met and
has issued a certificate of occupancy stating such.
No alteration or modification may be made to a manufactured
home or its systems which is not in compliance with the standards
set forth in 24 CFR Part 3280.
Nothing in this article shall be construed to imply that the
local Building Inspector is to inspect any part of the manufactured
home or its mechanical systems which was installed by the manufacturer
and in place prior to placement of the structure at the site.