[Amended by Ord. No. 1488; 8-14-2017 by Ord. No. 1832]
A. 
The purpose of this article is to create the legal framework to regulate, administer and enforce sign advertising and display within the limits of the Village of Whitefish Bay. This article recognizes the need to protect the health, safety, morals, and welfare of the public and the need for well-maintained and attractive sign displays within the community, and the need for free speech and communication.
B. 
This article authorizes the use of signs visible from public rights-of-way, provided the signs are:
(1) 
Compatible with the zoning regulations.
(2) 
Designed, constructed, installed and maintained in such a manner that they do not endanger public safety or traffic safety.
(3) 
Legible, readable and visible in the circumstances in which they are used.
C. 
No sign shall be erected or maintained except as provided in this article. If any sign is erected or maintained other than as provided in this article, both the owner of the property on which the sign is located and the person erecting or maintaining the sign shall be deemed to have violated the provisions of this article and be subject to penalty as provided in § 16-97 of this chapter.
[Amended 8-14-2017 by Ord. No. 1832]
As used in this article, the following terms shall have the meanings indicated:
ABANDONED SIGN
A sign for which no owner has any legal presence on the premises where the sign is displayed, or a sign for which the applicable fees have not been paid or which has not been maintained in accordance with § 16-47B(3) and which is hazardous.
AREA OF COPY
The entire area within a single, continuous perimeter composed of squares or rectangles which enclose the extreme limits of message, announcement, or decoration of a wall sign.
AREA OF SIGN
The area of the face(s) of the sign within a perimeter which forms the outside shape, but excluding the necessary supports or uprights on which the signs may be placed. If the sign consists of more than one section or module, all areas will be totaled. Any irregular-shaped sign area shall be computed using the actual sign face surface. In the case of wall signs, the area of copy will be used.
AWNINGS
In Business Districts, awnings with signs consisting of one line of copy upon the border of the awnings not exceeding eight inches in height and six feet in length.
BARBER POLE
A barber pole attached to any outside wall of a building, extending not more than 16 inches beyond such wall and not beyond the lot line, and free of supports or connections resting upon the sidewalk or ground.
BLOCK
The distance between two street intersections.
BUILDING FASCIA
That portion of a building which is parallel or nearly parallel to the abutting roadway and zoned as the front wall of the building.
CANOPY SIGN
Any sign attached to or constructed within, or under, a canopy or marquee. For the purpose of this article, canopy sign shall be controlled by the rules governing projecting signs.
CHANGEABLE MESSAGE SIGN (aka BULLETIN BOARD SIGN)
(Prohibited) A sign such as a manual, electronic or electric controlled sign, message center or reader board, whether electronic, electric or manual, where copy changes. No sign may be, or include as part of it, a changeable message, except that a manually changed marquee is permissible.
CONSTRUCTION SIGN or CONTRACTOR'S SIGN
A sign displayed at a construction site during construction.
DIRECTORY SIGN
A sign within a multi-occupancy building, not exceeding 24 square feet in area, with space assigned to each leaseholder or property owner.
DOUBLE-FACED SIGN
A sign with copy on two parallel faces that are back to back, facing opposite directions.
DWELLING UNIT
The quarters within a structure housing a "family," as defined in § 16-3 hereof.
ELECTRIC SIGN
Any sign containing internal electrical wiring which is attached or intended to be attached to an electrical energy source.
ELECTRONIC MESSAGE SIGN
A changeable message sign whose message is electrically activated, such as with light bulbs, mechanical flip discs, or fiber optics. See definition for "changeable message sign."
FLASHING SIGN
Any sign which contains an intermittent or flashing light source, or which includes the illusion of intermittent or flashing light by means of animation, or an externally mounted intermittent light source.
GRADE (ESTABLISHED)
The elevation of the top of street curb, as fixed by ordinance, nearest to the sign to which reference is made.
GROUND SIGN
A sign erected on one or more freestanding supports or uprights and not attached to any building. The area of a ground sign is the total area of sign.
HEIGHT OF SIGN
The vertical distance measured from the established grade to the highest point of such sign.
ILLUMINATED SIGN
A wall sign, projecting sign or ground sign which, contains no electrical circuit is constructed of incombustible material throughout, and for which fittings and materials used in the construction, connection and operation are in accordance with the Wisconsin State Electrical Code and the ordinances of this Village.
LEGAL NONCONFORMING SIGN
A sign that did meet code regulations when it was originally installed prior to the adoption of this article.
MARQUEE
A structure projecting over the entrance of a theater, hotel, or restaurant on which copy is manually changed. For the purpose of this article, marquees shall be controlled by the rules governing projecting signs.
NONCONFORMING SIGN
A sign that does not meet code regulations.
PORTABLE SIGN
Any sign not permanently attached to the ground or a building.
PROJECTING SIGN
A sign normally double-faced, which is attached to and projects more than eight inches from a structure or building fascia. The area of a projecting sign is the total area of the sign.
RIGHT-OF-WAY
The area dedicated for public access and use, including the street or alley, parkway and sidewalk areas between property lines.
ROOF SIGN
A sign erected upon, against or above a roof.
SANDWICH SIGN
A self-supporting, A-shaped, freestanding portable sign with only two visible sign faces that contain a message. For the purposes of the regulation of sandwich signs in the Village of Whitefish Bay, a "sandwich sign" is also known as a "sandwich board sign," a "portable sign," an "A-board sign," or an "H-frame sign."
SIGN
Any emblem, painting, banner, pennant, placard, design, identification, description, illustration or device, illuminated or nonilluminated, to advertise, identify, convey information communicate, or direct attention. For the purpose of removal, "signs" shall also include all sign structures.
SIGN CONTRACTOR
Any person, partnership or corporation engaged in whole or in part of the erection or maintenance of signs, excluding the business which the sign advertises.
SIGN STRUCTURE
Any device or material which supports, has supported, or is capable of supporting a sign in a stationary position, including decorative covers.
SWING SIGN
A sign installed on an arm or mast or spar that is not, in addition, permanently fastened to an adjacent wall or upright pole.
WALL SIGN
A sign attached to and within eight inches of the wall of a building with the face in a parallel plane to the plane of the building wall. This includes signs painted directly on a wall.
WINDOW SIGN
A sign installed at, applied to, or painted directly on a window for purposes of viewing from outside the premises.
[Amended by Ord. No. 1726; Ord. No. 1727; Ord. No. 1747; 8-14-2017 by Ord. No. 1832]
The following signs are permitted within the Village without a permit providing the referred to conditions are complied with:
A. 
Construction signs. One construction sign per construction site, not exceeding six square feet in area, at the site of construction, except for a construction sign for a new building at least two stories in height on a parcel of at least 1/4 acre where a construction sign can be up to four feet by eight feet. Such sign shall be removed upon completion of construction.
B. 
Nonelectric signs, signs belonging to a leaseholder or property owner located entirely on a property to which they pertain, that do not exceed three square feet in area.
C. 
Interior signs. Signs located within the interior of any building or structure which are not visible from the public right-of-way. This does not, however, exempt such signs from the structural, electrical, or material specifications of this chapter.
D. 
Residential district signs
(1) 
In one- and two-family residential districts, Districts 1 to 3 inclusive, such signs shall not exceed six square feet in area and shall be removed within 180 days after installation. Such signs may be reinstalled after a thirty-day waiting period. No more than three signs are allowed on any such property at any single time. One sign of no more than two square feet, may be maintained on the facade of each dwelling unit on a permanent basis.
(2) 
In all other districts, signs shall not exceed 16 square feet in area and shall be erected back of the front lot line and inside of the side setback lines of such property, except a larger sign up to four feet by eight feet is allowed for new buildings at least two stories in height on a parcel of at least 1/4 acre. Sign shall be removed with 180 days after installation. Such sign may be reinstalled after a thirty-day waiting period. No more than three signs are allowed on any such property at any single time.
E. 
Temporary window signs. In business districts, the inside surface of any window may be used for attachment of temporary signs. The total area of such signs, in addition to permanent interior and exterior window signs; however, shall not exceed 25% of the surface of each window to which the sign is attached, shall not be placed on door windows or other windows needed to be clear for pedestrian safety, and provided such signs are posted for a period not to exceed 60 days.
F. 
Nonilluminated emblems, symbols, or insignia containing less than seven words text, not exceeding four square feet in area.
G. 
Temporary signs. Temporary signs not exceeding 16 square feet in area, provided such signs are posted not more than 45 days. Such sign may be reinstalled after a thirty-day waiting period. No more than three signs are allowed on any such property at any single time.
H. 
Sandwich signs are not regulated under this section or any other section of the Zoning Code, but instead are subject to the requirements of Chapter 7, Streets and Sidewalks, Article VII, Sandwich Signs, of the Code of the Village of Whitefish Bay.
[Amended by Ord. No. 1728; Ord. No. 1747; Ord. No. 1752; 8-14-2017 by Ord. No. 1832]
The following signs are permitted within the respective zoning districts as follows, providing a permit is obtained and the referred to conditions are complied with.
A. 
Single- and two-family residential districts, Districts 1 to 3 inclusive. Any signs requiring a permit are prohibited.
B. 
Churches, public buildings and grounds, District 4. Clubs and Lodges, District 4A. Signs for authorized and legal nonconforming uses.
(1) 
Permitted signs. Wall signs and directional signs.
(2) 
Wall sign restrictions. Total area of wall signs shall not exceed 1/4 square foot per lineal foot of building fascia.
(3) 
Bulletin board restrictions. Total area of bulletin boards shall not exceed 24 square feet in. There shall be not more than one such bulletin board for each street frontage of the building, said board shall not be over eight feet high, and shall be located on private property and in accordance with § 9-2D(4) of the Code of the Village of Whitefish Bay.
(4) 
Signs and bulletin boards may be illuminated.
C. 
Apartment District, District 5.
(1) 
Permitted signs. Wall signs, directional signs, ground signs.
(2) 
Area restrictions. Sixteen square feet for ground signs, and the total area of wall signs is not to exceed 1/4 square foot per lineal foot of building fascia.
(3) 
Height restrictions. Ground signs are not to exceed a height of 10 feet.
(4) 
Signs may be illuminated.
D. 
Business, District 6. For business establishments which directly abut on and have direct access to a street or public parking lot at ground level, with no part of the building between nor on another floor level.
(1) 
The provisions of § 16-43H, except § 16-43H(6) regarding monument ground signs, shall apply to District 6. In the event of any conflict regarding multi-tenant buildings, § 16-43E shall control.
(2) 
Only one sign may be erected or maintained for a business establishment unless:
(a) 
The business establishment has frontage on two or more intersecting streets, and such streets abut property zoned either in District 6 or District 7, in which case a second sign, flat, ground or projecting, may be erected or maintained on one of the secondary street frontages, providing it does not exceed 24 square feet in total area.
(b) 
The business establishment has frontage on two or more intersecting streets or on property zoned within District 7, and such streets or property zoned within District 7 is abutted by property zoned within District 1, 1A, 2, 3, 5, 8, or 9, in which case a second sign, flat and unilluminated, may be erected or maintained on one of the secondary frontages or property zoned in District 7, providing it does not exceed 24 square feet in total area.
E. 
Business District 6, multi-tenant buildings. Where a business establishment, professional or business office establishment has no direct frontage abutting on a street or public parking lot at ground level.
(1) 
Signs for authorized and legal nonconforming uses.
(a) 
Permitted signs: window signs.
(b) 
Area restrictions: 25% of the surface of each window to which the sign is attached.
(c) 
Other signs.
(d) 
Shopping or office center signs: see Subsection D(1) and (2) of this section.
F. 
Automobile Parking, District 7. No sign shall be erected or maintained within District 7 except a sign which designates only the ownership, operator, use, purpose, fee condition or restrictions relating to such parking lot, which does not exceed 24 square feet in area and 10 feet in height and is located in a landscaped area.
[Amended at time of adoption of Code (see Ch. 17, Village Code and Ordinances, Art. I)]
G. 
Special Use District, District 8. Planned Development District, District 9. Signs, if any, shall be controlled by the provisions in the plan for the development, approved by the Plan Commission and Village Board, but shall not exceed the limitation restrictions on signs for the surrounding geographical area.
H. 
Silver Spring Drive Business, District 11. This subsection applies to business establishments that directly abut or have access to a street or public parking lot at ground level. This subsection also applies to businesses on another floor or level. The total area of signage shall not exceed 3/4 of one square foot per lineal foot of front building fascia for each business on the ground floor and 1/2 of one square foot per lineal foot for each leasehold above the ground floor. For each facade, one wall, projecting, canopy, monument ground, projecting ground, theatre marquee, or barber pole sign is allowed per business. For businesses on a level other than the ground floor only wall and permanent window signs are allowed. Single-tenant buildings with over 200 feet of frontage on Silver Spring Drive may have a wall sign on Silver Spring Drive in addition to all other signs under this section, provided the building is otherwise in compliance with this subsection and total signage on Silver Spring Drive does not exceed 150 square feet.
(1) 
Wall signs. Individual letters and symbols may be internally illuminated, but the overall background (if any) shall not be. Sign must be attached to a flat, opaque wall surface (not directly painted onto the wall) and may not extend more than eight inches from the wall surface of the building. Wall signs shall not exceed a total area of 100 square feet. A wall sign may be segmented to accommodate architectural features as approved by the Building Inspector.
016 Wall Signs.tif
(2) 
Projecting signs.
(a) 
Individual letters or symbols may be internally illuminated. Individual letters or symbols shall be attached to a panel not more than 12 inches thick. The area of the sign is calculated using the sum of all sides. No portion of a projecting sign may exceed 16 feet above sidewalk grade.
(b) 
The lower portion of projecting signs shall be a minimum of eight feet above sidewalk grade and may only extend a maximum projection of four feet from the building to which they are attached. Projecting signs shall not exceed a total area of 50 square feet.
016 Projecting Signs 1.tif 016 Projecting Signs 2 photo1.tif
(3) 
Awning signs.
(a) 
Individual letters or symbols shall be applied to or integral with an opaque, nontranslucent material covering an awning structure. Signage shall be no more than 12 inches in height and may be illuminated only from above by a general building lighting source.
(b) 
Awning border lettering may extend up to 75% of the length of the awning. The lettering on top of an awning may extend up to 45% of the length of the awning. Awning signing shall require a permit.
016 Awning Signs 1.tif 016 Awning Signs 2 photo.tif
(4) 
Canopy signs. Canopy signs must consist of individual letters or symbols, which may be internally illuminated. The sign may also include a panel integral to the canopy structure to which the letters or symbols are attached. The panel shall be not more than 12 inches thick.
016 Canopy Signs.tif
(5) 
Window signs.
(a) 
Permanent window signs must consist of only individual letters and symbols painted or placed on the glazed portion of the window. Temporary window signs consist of advertising on a flexible material placed inside the glazed portion of the window. The maximum signage display area is 25% of the glazed area of each window.
(b) 
Window signs covering less than 25% of the glassed area of each window and not otherwise prohibited shall not be regulated under this section and shall not require a permit.
(c) 
Leaseholders and property owners may post signing in bulletin board style on a single sign or case not to exceed 18 inches by 30 inches and mounted flush on the building.
(6) 
Monument ground signs.
(a) 
Individual letters or symbols may be internally illuminated, the base shall be as least as wide as the display area, and the design and materials of permanent signs shall be consistent with the building.
(b) 
If the sign is mounted on vertical supports, the bottom of the display area must be no greater than three feet above sidewalk grade.
(c) 
The width of vertical supports shall be no less than four inches at any point.
(d) 
The maximum height for monument ground signs is 10 feet above sidewalk grade. The maximum width for monument ground signs is four feet. The area of the sign is calculated using the sum of all sides.
(e) 
Monument ground signs shall not exceed a total area of 50 square feet.
016 Monument Ground Signs.tif
(7) 
Projecting ground signs.
(a) 
Projecting ground signs are defined as ground signs with a single vertical support element with signage projecting in one direction.
(b) 
Individual letters or symbols may be internally illuminated; the design and materials of projecting ground signs shall be consistent with the building.
(c) 
The width of vertical support member shall be no less than four inches at any point.
(d) 
Signage shall project no further than three feet from the vertical support member.
016 Prohibited Signs.tif
(e) 
Projecting ground signs shall only be located in nonpedestrian circulation areas.
(f) 
The maximum height for projecting ground signs is 10 feet above sidewalk grade. The area of the sign is calculated using the sum of all sides. Projecting ground signs shall not exceed a total area of 50 square feet.
(8) 
Theater marquees. Theater marquees existing prior to May 3, 2004, are permitted.
(9) 
Barber poles. A barber pole may only be attached to any outside wall of a building, extending not more than 16 inches beyond such wall and not beyond the lot line, and free of supports or connections resting upon the sidewalk or ground.
[Amended 8-14-2017 by Ord. No. 1832]
Banners and other promotion devices:
A. 
Off-street banners or pennants will be allowed as special promotion in Districts 4, 4A, 6, 8, and 9 for a total period not to exceed 15 days and will be allowed in Districts 1, 1A, 2, 3, and 5, not to exceed a total period of 15 days.
B. 
Each commercial business may display one banner or pennant in District 11 for a total period not to exceed seven days. Each business may display such banner or pennant no more than four times in any twelve-month period (not to exceed a total of 28 days in any twelve-month period). The total area of a banner shall not exceed 24 square feet.
C. 
Over the street special event banners not exceeding 150 square feet in area will be permissible over a street or carriageway by special permit from the Building Inspector upon his approval of the installation specifications, for a specified period, after approval by the Village Board and on proof of insurance.
D. 
Banners and pennants shall not be illuminated.
[Amended by Ord. No. 1488; 8-14-2017 by Ord. No. 1832]
All signs not specifically authorized by this article are prohibited and particularly the following:
A. 
Abandoned signs.
B. 
Moving signs. Signs with physically moving components visible from the public right-of-way except for approved barber poles.
C. 
Floodlighted signs. Reflection illuminated signs whose light source is positioned so that 25% or more of its light intensity is visible from a public right-of-way by vehicular operators or whose light source is visible from residential property.
D. 
Unclassified signs. Signs which:
(1) 
Bear or contain statements, words or pictures of obscene, pornographic or immoral subjects.
(2) 
Signs which are an imitation of, or resemble in shape, size, copy or color, an official traffic sign or signal so as to cause confusion and threaten public safety.
E. 
Signs prohibited by definition:
(1) 
Changeable message sign.
(2) 
Electronic message sign.
(3) 
Flashing sign.
(4) 
Portable sign.
(5) 
Off-premises sign.
(6) 
Roof sign.
(7) 
Sandwich sign.
(8) 
Swinging sign.
F. 
Searchlights.
G. 
Balloons: two feet in diameter and larger.
H. 
Off-street banners in place for more than 15 days.
I. 
Signs in the public right-of-way.
These standards shall apply to all signs within the Village except those in District 11.
A. 
A ground sign, any part of which is closer than 15 feet to the right-of-way, shall have a minimum vertical distance of 10 feet between the bottom of the sign and the established grade or shall not exceed three feet in height.
B. 
Any ground sign or projecting sign within 80 feet of a street intersection or 25 feet of a driveway, measured from the intersection of the center lines of the intersecting streets right-of-way, shall have either a minimum vertical distance of 10 feet between the bottom of the sign and the established grade or shall not exceed three feet in height.
C. 
All other projecting signs and any canopy sign shall have a minimum vertical distance between the bottom of the sign and the established grade at the right-of-way line nearest to the sign of nine feet.
D. 
Any ground sign or projecting sign shall not exceed 50 square feet in total area.
E. 
Projecting signs may extend not farther than five feet from the building to which they are attached.
F. 
No sign may extend into the right-of-way.
G. 
The gross area of permanent window signs shall not exceed 25% of the gross window area of any given building fascia.
H. 
Any sign location that is accessible to vehicles shall have a minimum vertical clearance of 16 feet. [See National Electrical Code 600.10(B).]
I. 
No sign shall directly face a residential district, Districts 1, 1A, 2, 3.
J. 
No illuminated sign shall directly face or project into a street where a part of the street within the block in which the sign is situated is abutted by property zoned within District 1, 1A, 2, 3 or 7.
A. 
Construction specifications.
(1) 
All signs shall comply with the provisions of the Village of Whitefish Bay Building Code and the National Electrical Code (Current Edition), in addition to the construction standards hereinafter set forth.
(2) 
All ground sign structures shall be self-supporting structures and securely attached to sufficient foundations.
(3) 
Electric service to all signs shall be concealed.
(4) 
All signs except those attached flat against the wall of a building shall be constructed to withstand wind loads as follows, with correct engineering adjustments for the height of the sign above grade.
(a) 
For solid signs, 30 pounds per square foot on the largest face of the sign and structure.
(b) 
For skeleton signs, 30 pounds per square foot of the total face cover of the letters and other sign surfaces or 10 pounds per square foot of the gross area of the sign, as determined by the overall dimensions of the sign, whichever is greater.
(5) 
No sign shall be suspended by chains or other devices that will allow the sign to swing in the wind. Signs shall be anchored to prevent any lateral movement that could cause wear on supporting members or connections.
(6) 
Supports and braces shall be an integral part of the sign design. Angle irons, chains or wires used for supports or braces shall be hidden from public view to the extent technically feasible.
(7) 
All commercially produced signs shall be marked with the manufacturer's name in a size which is easily visible from the ground. All electric signs shall also include: for incandescent lamp signs, the number of lamp holders; for electric discharge lamp signs, the input amperes at full load and the input voltage.
(8) 
No sign or any part of such sign, or any anchor, brace or guy rod, shall be attached, fastened or anchored to any fire escape, fire ladder or stand pipe; nor be erected or maintained so as to cover or obstruct any door, doorway or window of any building so as to hinder or prevent ingress or egress through such doorway or window or so as to prevent or hinder the raising or placing of ladders against such buildings by the Fire Department of the Village as necessity therefor may require. No sign shall be erected or maintained which covers any required window area or exit door. No sign shall be located to conflict with the provisions of § 9-2D(4) of the Code of the Village of Whitefish Bay.
B. 
Installation and maintenance.
(1) 
All signs shall be installed in a workmanlike manner using equipment which is adequate and safe for the task. The article recognizes that one of the greatest perils to public safety is improper performance of sign contractors in the use of inadequate equipment. As such, the Building Inspector may also cite the sign contractor for a violation of this article if he fails to use proper equipment in the maintenance of signs.
(2) 
Electrical signs. This article recognizes that electric signs are controlled under the special equipment provisions of the National Electric Code and Chapter 12, Electrical Code. It also recognizes that electric sign contractors have developed a specialized trade for high-voltage discharge electrical sign installation and maintenance to properly install and service high voltage electric signs. Electric sign contractors and their employees are herein authorized to perform the following specific tasks:
(a) 
Install exterior electric signs, ballasts, or high-voltage transformers to sockets or outline lighting tubes, and to connect said signs to primary branch circuit, if said circuit already exists outside of the building.
(b) 
Install interior electric signs, but not to connect said signs to the primary branch circuit.
(c) 
Maintain and replace only electric components within the sign, on its surface, or between the sign and building for exterior signs. This article prohibits the electric sign contractor or its employees from performing work on electric signs in contradiction to the National Electrical Code or Chapter 12, Electrical Code.
(3) 
Every sign, including but not limited to those signs for which permits are required, shall be maintained in a safe, presentable and good structural condition at all times, including replacement of defective parts, painting (except when a weathered or natural surface is intended), repainting, cleaning and other acts required for the maintenance of said sign.
(4) 
The Building Inspector shall require compliance with all standards of this chapter. If the sign is not modified to comply with safety standards outlined in this chapter, the Building Inspector shall require its removal in accordance with this chapter.
[Amended by Ord. No. 1419; 8-14-2017 by Ord. No. 1832]
A. 
Permits required. In those instances where a permit is required hereunder for the particular sign, it shall be unlawful for any person to erect, construct, enlarge or cause the same to be done in the Village of Whitefish Bay without first obtaining such sign permit for each such sign from the Building Inspector. Permits shall not be required for repainting, cleaning and other normal maintenance and repair of the sign and sign structure.
B. 
Application for a permit. Application for a permit shall be filed with the Building Inspector upon forms provided by the Building Inspector and shall contain the following information:
(1) 
The name, address and telephone number of the sign owner, the property owner where the sign is or will be located, and the sign contractor of the proposed sign.
(2) 
Clear and legible scale drawings with description and nominal dimensions of the proposed sign, the construction, size, dimensions and kind of materials to be used in such structure.
(3) 
A site plan showing the buildings on the premises upon which the structure is to be erected and maintained, together with location, size, and types of existing signs on the premises where the proposed sign is to be located.
(4) 
Calculations or evidence showing that the structure and design meets the requirements of this chapter for wind pressure load.
(5) 
Evidence of liability, insurance policy or bond as required herein.
(6) 
Photos of subject property and sign site.
(7) 
Such other information as the Building Inspector may require to show full compliance with this and all other applicable ordinances of the Village of Whitefish Bay.
(8) 
Signature of the applicant.
(9) 
Payment for all required fees.
C. 
Permit fees.
[Amended at time of adoption of Code (see Ch. 17, Village Code and Ordinances, Art. I)]
(1) 
An application for permit shall be filed with the Building Inspector together with a permit fee for each sign in accordance with the schedule of fees set by the Village Board from time to time.
(2) 
Provided, however, that there shall be a minimum fee for a permit for any sign, exclusive of any electrical permit. All illuminated signs also require a separate electrical permit.
D. 
Annual special permit and inspection fees. The annual inspection fee for an approved illuminated sign shall be as set by the Village Board from time to time. Such annual inspection fee shall be payable on the first day of April following erection.
[Amended at time of adoption of Code (see Ch. 17, Village Code and Ordinances, Art. I)]
E. 
Permit issuance and denial. The Building Inspector shall issue a permit for the erection, structural alteration, enlargement, or relocation of a sign within the Village of Whitefish Bay when the permit application is properly made, all appropriate fees have been paid, and the sign complies with the appropriate ordinances and regulations of the Village of Whitefish Bay as being in keeping with the character of the area and not creating or creating glare, incitement, threats to public health and safety or other depreciating factors. The Building Inspector may refer the application to the Architectural Review Commission if any concerns or reservations regarding compliance with appropriate ordinances and regulations exist. If the sign permit is denied by the Building Inspector, he shall give written notice of the denial to the applicant, together with a brief statement of the reasons for the denial, along with the return of all permit fees.
F. 
Sign permit appeal.
(1) 
In the event any of the requirements herein contained cause undue, unnecessary or unique hardship on any person, firm or corporation, a variance from requirements may be applied for to the Board of Appeals. An application for variance must be made within 10 days after receipt of notice that the permit is being denied and no less than 15 calendar days before a scheduled Board of Appeals meeting. In the event that the appeal is not made in writing to the Appeals Board within such ten-day period, a variance may not be granted. The Board of Appeals shall act on any variance request within 60 days of receipt of the variance application. The Building Inspector shall comply with and enforce the Zoning Board of Appeals decision.
(2) 
The Building Inspector's failure to either formally grant or deny a sign permit within 15 days of the date of which the application was filed shall be deemed a denial and a basis for appeal for the Zoning Board of Appeals.
G. 
Indemnification for sign installation and maintenance. All persons engaged in the business of installing or maintaining signs within the Village of Whitefish Bay which involves, in whole or in part, the erection, alteration, relocation, maintenance of a sign or other sign work in, over, or immediately adjacent to a public right-of-way or where public property is to be used or encroached upon by the sign contractor shall, by making application for a sign permit, undertake to hold harmless and indemnify the Village of Whitefish Bay, its officers, agents, employees, from any and all claims of negligence resulting from the erection, alteration, relocation, maintenance of this sign or any other sign work insofar as this chapter has not specifically directed the placement of the sign.
H. 
Insurance. Each sign contractor shall file with the Building Inspector a certificate of insurance indicating the applicant holds a public liability and property damage insurance policy with bodily injury limits of at least $300,000 per occurrence, and $300,000 aggregate, and property damage limits of at least $100,000 per occurrence, and $100,000 aggregate.
I. 
Remedies. Violation or failure to comply with the provisions of this article shall be and hereby is declared to be unlawful.
(1) 
Any abandoned, deteriorated or dilapidated signs, or any sign erected, altered, moved or structurally modified without a permit or altered with a permit but in violation with the provisions of this article shall be removed at the owner's expense or brought into compliance within 30 days of written notification by the Building Inspector. If deemed hazardous by the Building Inspector, such sign shall be removed or brought into compliance within 48 hours of written notification. If the violation is failure to obtain a permit, a permit fee shall be required and the permit fee shall be five times normal fees. In the event that the owner does not remove the sign or bring the sign into compliance, the Building Inspector may order removal, the expenses of which will be assessed to the tax roll of the property on which the noncomplying sign is located.
(2) 
This section shall not preclude the Village of Whitefish Bay from maintaining any appropriate action to prevent or remove a violation of this article.
(3) 
The Building Inspector or Police Department may remove any sign which is erected within the public right-of-way and which is in violation of this chapter.
A. 
Notification of nonconformance. After enactment of this article, the Building Inspector shall survey the Village of Whitefish Bay to inventory all signs. Upon determination that a sign is nonconforming, the Building Inspector shall notify in writing the user or owner of the property on which the sign is located of the following:
(1) 
The sign's nonconformity.
(2) 
Whether the sign is eligible for characterization as legal nonconforming or is unlawful.
B. 
Signs eligible for characterization as legal nonconforming. Any sign located within the Village of Whitefish Bay on the date of adoption of this article, or located in an area annexed to the Village of Whitefish Bay, hereafter, which does not conform with the provisions of this article (with the exception of signs in District 11, which shall in any event lose legal nonconforming status five years after the adoption of any requirement applying specifically to District 11, or the issuance of a new conditional use permit to the occupant) is eligible for characterization as a legal nonconforming sign and is permitted, providing it also meets the following requirements:
(1) 
A proper sign permit was issued for the sign prior to the date of adoption of this article.
(2) 
If no permit was required under applicable ordinance for the sign in question and the sign was in all respects in compliance with applicable ordinances on the date of adoption of this article.
C. 
Loss of legal nonconforming status. A sign loses its legal nonconforming status if one or more of the following occurs:
(1) 
The sign is structurally altered in any way, except for normal maintenance or repair, which tends to or makes the sign less in compliance with requirements of this article than it was before alteration.
(2) 
The sign is relocated.
(3) 
The sign fails to conform to the article regarding maintenance and repair, is abandoned, or is dangerous or defective.
(4) 
The sign is changed, except for marquees. On the date of occurrence of any of the above, the sign shall be immediately brought in compliance with this article, a new permit shall be secured therefor, or the sign shall be removed.
[Amended 8-14-2017 by Ord. No. 1832]
D. 
Legal nonconforming sign maintenance and repair. Nothing in this article shall relieve the owner or user of a legal nonconforming sign or the owner of the property in which the sign is located from the provisions of this article regarding safety, maintenance, and repair of signs.
E. 
Insurance. The owner or user of a legal nonconforming sign, part of which is located in the public right-of-way, shall file with the Building Inspector a liability insurance policy with minimum limits as established in § 16-48H of this article, within 30 days of notification of legal nonconforming status by the Building Inspector.[1]
[1]
Editor's Note: Original Subsection K, which immediately followed this subsection, was repealed by Ord. No. 1724.