[1]
Editor's Note: The title of this article was changed
to "Establishment of Use and Dimensional Regulations" by L.L. No.
1-2015, adopted 10-15-2015.
Except as herein provided:
A.
No building or land shall hereafter be used or occupied, and no building or part thereof shall be erected, moved or altered unless in conformity with the regulations herein specified for the district in which it is located. All uses not specifically listed in Schedule I are hereby prohibited in any use district (see Article V, § 150-16).
B.
Unless a variance has been granted by the Board of Appeals, no building
shall hereafter be erected or altered to:
C.
No part of a yard or other open space required about any building
for the purpose of complying with the provisions of this chapter shall
be included as part of a yard or other open space similarly required
for another building.
A.
Purpose. The intent of the A-1 District is to identify areas where
agriculture is the dominant and most important land use activity.
Productivity is high and consistent in some areas and variable in
others. Farming, farm-related businesses and agricultural services
are the long-range and desired land use activities. Some nonagricultural
development, primarily low-density housing, has occurred and is anticipated
in the future. Regulations and development standards for the A-1 District
are intended to preserve the ability to engage in intensive agricultural
practices, to support a limited amount of compatible non-farm development,
to preserve the traffic-carrying function of major roads and to minimize
potential conflict between farm operations and non-farm land uses.
[Added 10-15-2015 by L.L.
No. 1-2015]
A.
Purpose. The intent of the A-1-2 District is to identify an area
that has historically served as a resource for mined materials for
many years and while such mining is permitted under a mining permit
issued by the DEC and is in full compliance of all terms of the permit,
then mining can be carried on in the district in the area permitted
by the DEC.
B.
Uses permitted in the A-1-2 Mining District: see Schedule I.
C.
Lot area and dimensional requirements: see Schedule II.
A.
Purpose. The intent of the A-2 District is to identify areas of less
intensive and productive farming activity and land where preservation
of natural resources, reforestation and public or private recreational
activities are predominant land uses. In some locations, large areas
of A-2 land are owned and controlled by some level of government;
in other areas, land uses such as ski slopes and golf courses have
been developed and are privately owned. Low-density, single-family
housing has also been built in some locations and is generally compatible
with the desired openness of the district. Regulations and development
standards for this district are intended to limit the type of development
activity that can occur and to preserve and encourage the openness
that currently defines the character of this area.
B.
Uses permitted in the A-2 Agricultural District: see Schedule I.
C.
Lot area and dimensional requirements: see Schedule II.
A.
Purpose. The intent of the R-1 District is to designate areas where
concentrations of low-density housing, primarily one-family residences,
is the expected and desired land use. Such areas are generally located
adjacent to R-2 Districts and are intended to be somewhat less densely
developed. Farming and limited types of nonresidential development
can also be appropriate in R-1 Districts. Regulations and development
standards for this district are intended to preserve open space, as
well as the physical and visual character of existing development,
to provide areas where future low-density residential development
can occur and to preserve, to the extent practicable, the traffic-carrying
functions of existing major roads.
B.
Uses permitted in R-1 Residential District: see Schedule I.
C.
Lot area and dimensional requirements: see Schedule II.
A.
Purpose. The intent of the R-2 District is to designate areas where
a mixture of residential types and a limited amount of compatible
nonresidential development would be appropriate. Regulations and development
standards will allow for increased density when adequate water and
sewage disposal services can be provided. R-2 Districts are generally
located in or adjacent to concentrations of existing development such
as the Village of Fabius and the hamlets of Apulia and Apulia Station.
B.
Uses permitted in R-1 Residential District: see Schedule I.
C.
Lot area and dimensional requirements: see Schedule II.
A.
Purpose. The intent of the C-1 District is to designate limited areas
where a variety of commercial and personal service uses can be located.
Housing would also be appropriate in such area especially on upper
floors over nonresidential land uses on the ground floor. Regulations
and development standards for C-1 areas will help to provide opportunities
for basic commercial goods and personal services needed by Town residents.
While a variety of nonresidential land uses would be appropriate in
C-1 areas, preservation of the basic character of existing development
is also an important consideration.
B.
Uses permitted in C-1 Commercial District: see Schedule I.
C.
Lot area and dimensional requirements: see Schedule II.
A.
Purpose. The intent of the I-1 Industrial District is to designate
limited areas where activities involving light manufacturing, fabrication,
assembly, research and similar land uses can be appropriate. Some
commercial land uses could also be suitable in such I-1 areas. Regulations
and standards for I-1 Districts will establish criteria for the review
of development proposals and for assuring the new land uses will not
detract from, or be inconsistent with, the environmental and development
qualities of adjacent and surrounding areas.
B.
Uses permitted in I-1 Industrial District: see Schedule I.
C.
Lot area and dimensional requirements: see Schedule II.
