[Ord. No. 572, § I(9.1801), 2-6-1996]
This article permits specific uses in specific districts; and these performance standards are designed to limit, restrict and prohibit the effect of those uses outside their premises or district. All structures, land, air and water shall hereafter, in addition to their use and site regulations, comply with the following performance standards.
[Ord. No. 572, § I(9.1802), 2-6-1996]
No person or activity shall emit any fly ash, dust, fumes, vapors, mists or gases in such quantities so as to substantially contribute to exceeding state or federal air pollution standards.
[Ord. No. 572, § I(9.1803), 2-6-1996]
All activities involving the manufacturing, utilization, processing or storage of flammable or explosive materials shall be provided with adequate safety devices against the hazard of fire and explosion and with adequate firefighting and fire-suppression equipment and devices that are standard in the industry. All materials that range from active to intense burning shall be manufactured, utilized, processed or stored only within completely enclosed buildings which have incombustible exterior walls and automatic fire extinguishing systems. The aboveground storage capacity of materials that produce flammable or explosive vapors shall not exceed 50,000 gallons.
[Ord. No. 572, § I(9.1804), 2-6-1996]
No activity shall emit glare or heat that is visible or measurable outside its premises except activities which may emit direct or sky-reflected glare which shall not be visible outside their district. All operations producing intense glare or heat shall be conducted within a completely enclosed building. Exposed sources of light shall be shielded so as not to be visible outside their premises.
[Ord. No. 572, § I(9.1805), 2-6-1996]
No activity shall locate, store, discharge or permit the discharge of any treated, untreated or inadequately treated liquid, gaseous or solid materials of such nature, quantity, obnoxiousness, toxicity or temperature that might run off, seep, percolate or wash into surface or subsurface waters so as to contaminate, pollute or harm such waters or cause nuisances such as objectionable shore deposits, floating or submerged debris, oil or scum, color, odor, taste or unsightliness or be harmful to human, animal, plant or aquatic life. In addition, no activity shall withdraw water or discharge any liquid or solid materials so as to exceed, or contribute toward the exceeding of, the minimum standards set forth in chapter NR 102 of the Wisconsin Administrative Code.
[Ord. No. 572, § I(9.1806), 2-6-1996]
(a) 
No activity in any manufacturing district shall produce a sound level outside the district boundary that exceeds the following sound level measured by a sound level meter and associated octave level filter:
Octave Band Frequency
(cycles per second)
Sound Level
(decibels)
0 to 75
79
75 to 150
67
150 to 300
59
300 to 600
52
600 to 1,200
46
1,200 to 2,400
40
2,400 to 4,800
34
Above 4,800
32
(b) 
All noise shall be so muffled or otherwise controlled as not to become objectionable due to intermittence, duration, beat frequency, impulse character, periodic character or shrillness.
[Ord. No. 572, § I(9.1807), 2-6-1996]
No activity shall emit any odorous matter of such nature or quality as to be offensive, obnoxious or unhealthful outside their premises. The guide for determining odor measurement and control shall be chapter NR 154 of the Wisconsin Administrative Code and amendments thereto.
[Ord. No. 572, § I(9.1809), 2-6-1996]
No activity in any district shall emit vibrations which are discernible without instruments outside its premises. No activity shall emit vibrations which exceed the following displacement measured with a three-component measuring system:
Displacement
(inches)
Frequency
(cycles per second)
Outside Premises
Outside District
0 to 10
0.0020
0.0004
10 to 20
0.0010
0.0002
20 to 30
0.0006
0.0001
30 to 40
0.0004
0.0001
40 to 50
0.0003
0.0001
50 and over
0.0002
0.0001