[1]
Editor’s Note: This article, adopted as Art. III, was renumbered by the codifier for organizational purposes.
[1-19-2022]
The purpose of this article is to indicate the maximum permitted density (for residential projects) and maximum permitted intensity (for nonresidential projects) of development on any given site within the jurisdiction of this chapter (see Section 98-009). The development potential of any site is determined by a variety of factors, including but not limited to 1) the area of the site; 2) the proportion of the site not containing sensitive natural resources; 3) the zoning district(s) in which the site is located; 4) the development option(s) the site is developed under; and 5) the use(s) considered for development.
Rationale: This article regulates the development potential of all property within the jurisdiction of this chapter. This article is designed to ensure the implementation of many goals and objectives of the City of Lake Geneva Comprehensive Master Plan. (See also, Section 98-005 of this chapter.) Many of these are extremely difficult to address using conventional zoning techniques, particularly those which rely on minimum lot area requirements to establish maximum permitted residential densities, and maximum floor area ratios to establish the character of nonresidential developments. Such approaches provide for a minimum flexibility of site design options, which in turn results in land use inefficiencies, forced site planning, and/or the needless destruction of sensitive natural resources. The approach employed by this article, relying on maximum gross densities (MGDs) and minimum green space ratios (GSRs) for residential development, and minimum required landscape surface ratios (LSRs) in combination with maximum permitted floor area ratios (FARs) for nonresidential development, (both in conjunction with a variety of development options available in every zoning district) results in a very high degree of site design flexibility and the protection and implementation of desired community character and adopted community goals.
[1-19-2022]
This article contains the standards which determine the maximum amount of development permitted on any given site. Prior to using the provisions of this article to determine the development potential of a given property, the guidelines provided by Section 98-306(1) though (3) should be reviewed. This article recognizes inherent differences between residential and nonresidential land uses, and thus regulates their development in slightly different manners. The description of the process addressing residential development in Section 98-306(1) and (2) refers to the requirements of Section 98-304, Residential density standards. The description of the process addressing nonresidential development in Section 98-306(1) and (3) refers to the requirements of Section 98-305, Nonresidential intensity standards.
[1-19-2022]
(1) 
Purpose. An important goal of the City of Lake Geneva Comprehensive Master Plan is the protection of natural resources which are sensitive to disruption caused by development and/or other land use activities. These resources include floodways, floodplain areas, floodfringes, shorelands, wetlands, drainageways, lakeshores, steep slopes, and woodlands. (These resources are fully defined in Article 5, Natural Resource Protection Regulations.) These resources serve important functions which are lost when these areas are subject to development and/or other land use activities, in the absence of correct mitigation approaches. In many instances, these functions cannot be provided by other natural or man-made features. Specific broad categories of such functions include the protection and enhancement of air, surface water, and soil quality; habitat provision and diversification; aesthetic diversification; and buffering effects.
(2) 
Mitigation. In certain instances, natural features can accommodate development and/or other land use activities without a significant loss of their functional benefits if proper mitigation practices are employed. Article 5, Natural Resource Protection Regulations, provides detailed standards regarding permitted mitigation techniques and requirements.
(3) 
Natural resources site evaluation worksheet.
(a)
Determine the gross site area (GSA) of the site:
1.
Total site area as determined by actual on-site survey
_____ acres
2.
Subtract area located within proposed rights-of-ways of roads and within proposed boundaries of public facilities which are designated within the City's Comprehensive Master Plan and/or required for dedication per subdivision regulations
- _____ acres
3.
Subtract land which although part of the same parcel is not contiguous to, or is not accessible from, the proposed road network serving the project
- _____ acres
4.
Subtract land which is proposed for a different development option or a different zoning district
- _____ acres
5.
Subtract area of navigable waters (lakes and streams)
- _____ acres
6.
Equals gross site area (GSA)
= _____ acres
(b)
Determine the required resource protection area (RPA) of the site:
1.
Portion of gross site area containing floodways
_____ acres
2.
Portion of gross site area containing floodplain areas
_____ acres
3.
Portion of gross site area containing floodfringes
_____ acres
4.
Add portion of gross site area containing wetlands
+ _____ acres
5.
Add portion of gross site area containing drainageways
+ _____ acres
6.
Add portion of gross site area containing lakeshores
+ _____ acres
7.
Add portion of gross site area containing woodlands
+ _____ acres
8.
Add portion of gross site area containing steep slopes
+ _____ acres
9.
Subtract portions of natural resource areas [(b)1-(b)9] made developable using approved environmental mitigation techniques
- _____ acres
6.
Equals required resource protection area (RPA).
= _____ acres
(c)
Determine the net developable area (NDA) of the site:
1.
Enter gross site area (GSA) [from (a)6, above]
_____ acres
2.
Subtract required resource protection area (RPA) [from (b)10, above]
- _____ acres
3.
Equals net developable area (NDA)
= _____ acres
[1-19-2022]
Zoning District
Regulates the type of uses permitted on the site. Section 98-105 describes each zoning district. Table 98-203 provides a detailed listing of all uses permitted in each zoning district. Sections 98-205 and 98-206 provide detailed regulations applying to specific land uses. Zoning districts are depicted on the Official Zoning Map (see Section 98-103).
Key to Table 98-304 Maximum gross density
Is the maximum number of dwelling units permitted on one acre of gross site area in the specific zoning district and development option. Gross site area is calculated in Section 98-303(3)(a).
Minimum lot area
Is the minimum size lot permitted within the specified zoning district and development option. This also limits the type of dwelling unit permitted. Specific dwelling unit regulations are given in Section 98-034.
Development Option
Describes the maximum level of clustering and the minimum proportion of permanently protected green space area permitted on the site. (Refer to Section 98-206 for a full description of each development option and specific regulations which apply to its use.)
Minimum Landscape Surface Ratio
Is the minimum permitted percentage of the gross site area (GSA) which must be preserved as permanently protected landscaped area. LSR is calculated by dividing the total landscaped area of a site by the GSA. GSA is calculated in Section 98-303(3)(a). "Landscaped area" is defined in Section 98-034.
Table 98-304: City of Lake Geneva Residential Density Standards
Zoning District
Development Option
Maximum Gross Density
(MGD)
Minimum Lot Area(MLA)
Minimum Zoning District Area
Minimum Landscape Surface Ratio
(LSR)
Single-Family Res-4
Conventional
4.00
9,000 square feet
9,000 square feet
50%
Two-Family Res-6
Conventional
6.00
9,000 square feet
9,000 square feet
50%
Mobile home
5.00
9,000 square feet
10 acres
50%
Multifamily Res-8
Conventional/institutional
8.00
4,500 square feet per du
18,000 square feet
50%
Rural Holding
Conventional
0.03
35 acres
35 acres
90%
Countryside Residential-5ac
Conventional
0.20
5 acres
5 acres
80%
Cluster
0.25
40,000 square feet
5 acres
90%
Estate Residential-1
Conventional
1.00
40,000 square feet
40,000 square feet
60%
Single-Family Residential-3
Conventional
3.00
15,000 square feet
15,000 square feet
50%
Single-Family Residential-4
Conventional
4.00
9,000 square feet
9,000 square feet
50%
Two-Family Residential-61
Conventional
6.00
9,000 square feet
9,000 square feet
50%
Mobile home
5.00
9,000 square feet
10 acres
50%
Multifamily Residential-81, 2
Conventional/institutional
8.004
4,500 square feet per du
10 acres
50%
Neighborhood Office
Conventional
Varies1, 2, 3
9,000 square feet
50%
Institutional
Varies5
9,000 square feet
50%
Planned Office
Institutional
Varies5
20,000 square feet
40,000 square feet
50%
Neighborhood Business
Conventional
Varies1, 2, 3
9,000 square feet
50%
Institutional
Varies5
9,000 square feet
50%
Planned Business
Institutional
Varies5
20,000 square feet
40,000 square feet
50%
General Business
Institutional
Varies5
9,000 square feet
18,000 square feet
50%
Central Business
Institutional
Varies5
9,000 square feet
9,000 square feet
0%
1
For single-family, see Single-Family-4 District.
2
For two-family, see Two-Family-6 District.
3
For townhouse, multiplex, apartment and institutional residential development, see Multifamily-8 District.
4
Up to 10.00 du/acre per the limits of the conditional use permit.
5
Up to 50.00 du/acre per the limits of the conditional use permit.
[1-19-2022]
Zoning District
Regulates the type of uses permitted on the site. Section 98-205 describes each zoning district. Table 98-203 provides a detailed listing of all uses permitted in each zoning district. Sections 98-205 and 98-206 provide detailed regulations applying to specific land uses. Zoning districts are depicted on the Official Zoning Map (see Section 98-103).
Key to Table 98-305 Maximum Floor Area
Is the maximum permitted ratio calculated by dividing the total gross floor area of all buildings on a site by the gross site area (GSA). "Gross floor area" is defined in Section 98-034.
Maximum building size
Is the maximum total gross floor area which a building is permitted to contain. "Gross floor area" is defined in Section 98-034.
Maximum Number of Floors
Is the maximum number of full floors a building is permitted to contain. "Full floors" is defined in Section 98-034
Minimum Landscape Surface Area Ratio
Is the minimum permitted percentage of the gross site area (GSA) which must be protected landscaped area. LSR is calculated by dividing the total landscaped area of a site by the gross site area (GSA). GSA is calculated in Section 98-303(3)(a). "Landscaped area" is defined in Section 98-034.
Minimum Lot Area
Is the minimum size lot permitted in the specified zoning district for a building with the listed number of floors.
Zoning District
Max Number of Floors(F)
Min Landscape Surface Ratio
(LSR)
Max Floor Surface Ratio
(FAR)
Min Lot Area
(MLA)
Max Bldg Size
(MBS)
Neighborhood Business
1
30%
0.250
9,000 square feet
5,000 square feet
2
40%
0.275
9,000 square feet
5,000 square feet
Planned Business
1
25%
0.250
20,000 square feet
NA
2
30%
0.275
20,000 square feet
NA
3
33%
0.300
20,000 square feet
NA
4
35%
0.300
20,000 square feet
NA
Rural Holding**
1
90%
0.100
40,000 square feet*
NA
Countryside Residential**
1
80%
0.100
40,000 square feet*
NA
Estate Residential**
1
60%
0.100
40,000 square feet*
NA
Single-Family Res-3**
1
50%
0.100
40,000 square feet*
NA
Single-Family Res-4**
1
50%
0.150
40,000 square feet*
NA
Two-Family Res-6**
1
30%
0.200
40,000 square feet*
NA
2
40%
0.220
40,000 square feet*
NA
Multifamily Res-8**
1
25%
0.250
40,000 square feet*
NA
2
30%
0.275
40,000 square feet*
NA
Neighborhood Office
1 or 2
40%
0.250
9,000 square feet
NA
Planned Office
1
25%
0.250
20,000 square feet
NA
2
30%
0.275
20,000 square feet
NA
3
33%
0.290
20,000 square feet
NA
4
35%
0.300
20,000 square feet
NA
Neighborhood Business
1
30%
0.250
9,000 square feet
5,000 square feet
2
40%
0.275
9,000 square feet
5,000 square feet
Planned Business
1
25%
0.250
20,000 square feet
NA
2
30%
0.275
20,000 square feet
NA
3
33%
0.290
20,000 square feet
NA
4
35%
0.300
20,000 square feet
NA
General Business
1
15%
0.300
9,000 square feet
NA
2
18%
0.350
9,000 square feet
NA
3
22%
0.375
9,000 square feet
NA
4
25%
0.400
9,000 square feet
NA
Central Business
1
0%
1.000
1,750 square feet
NA
2
0%
2.000
1,750 square feet
NA
3
10%
2.500
1,750 square feet
NA
4
20%
3.000
1,750 square feet
NA
Planned Industrial
1
25%
0.500
40,000 square feet*
NA
2
30%
0.550
40,000 square feet*
NA
3
33%
0.575
40,000 square feet*
NA
4
35%
0.600
40,000 square feet*
NA
General Industrial
1
15%
0.800
9,000 square feet
NA
2
18%
0.900
9,000 square feet
NA
3
22%
0.975
9,000 square feet
NA
4
25%
1.000
9,000 square feet
NA
Heavy Industrial
1
15%
0.850
9,000 square feet
NA
2+
18%
1.000
9,000 square feet
NA
*
Reduction in lot area from 40,000 square feet to 20,000 square feet is permitted as a conditional use per Section 98-905 with site plan for end use of the property demonstrating full compliance with all of the requirements of the City Code.
**
For permitted nonresidential uses in residential districts, such as churches and schools.
[1-19-2022]
(1) 
Instructions for both residential and nonresidential development.
(a) 
Check planning recommendations for the subject property.
1. 
Check Comprehensive Plan recommendations. The City's Comprehensive Plan should be checked for implications related to the subject property, particularly the Land Use and Transportation Plan Map. (Copies of the Comprehensive Plan are available from the City.) From time to time, the Comprehensive Plan may be amended. The City's Public Work's Development should be consulted regarding changes to the Comprehensive Plan which may effect the subject property or its environs.
2. 
Check Official Map recommendations. The City's Official Map should be checked for proposed capital facilities and dedication requirements, including schools, parks, stormwater management facilities and street improvements which may effect the subject property. The Official Map is on display at the City's Public Works Department. From time to time the Official Map may be amended. The City's Public Works Department should be contacted regarding changes to the map which may effect the subject property or its environs.
(b) 
Check the zoning of the subject property. The potential amount and type of development any given site may contain is directly related to the zoning district in which the site is located. The subject property should be identified on the City's Official Zoning Map (see Section 98-103), and the current zoning designation should be compared with the description of that district provided in Section 98-105. The Official Zoning Map is on display at the City's Public Work's Department. From time to time, the Official Zoning Map may be amended. The Zoning Administrator should be contacted regarding potential changes in the Official Zoning Map which may effect the subject property or its environs.
(c) 
Complete a natural resources site evaluation for the site. The effect of protected natural resources on the development potential of the subject property should be evaluated. All resources listed in Section 98-303, Required natural resources site evaluation, should be identified on the subject property, located on a map (or air photo) of the subject property, and the total area of the property (in acres) covered by those resources, known as "required resource protection area" (RPA) should be determined, as should the gross site area (GSA) and the net developable area (NDA) of the subject property. [Section 98-303(3) contains a worksheet to simplify these calculations.] The Zoning Administrator should be contacted if assistance is desired in completing these calculations.
(2) 
Instructions for only residential development. (For Steps (a) through (c), see Subsection (1), above.)
(a) 
Determine what types of dwelling units are permitted: The Table of Land Uses (Section 98-203) should be checked to determine which types of dwelling units are permitted within the zoning district for the subject property. (Section 98-034 describes each dwelling unit types.)
(b) 
Identify the desired permitted development option. The Table of Uses (Section 98-203) should also be checked to determine which types of development options are permitted within the zoning district for the subject property. Each development option is described in detail in Section 98-206(1). The selection of a particular development option may be related to the preponderance of sensitive natural resource areas on the site, or may reflect current or projected residential market conditions and the dwelling unit types they call for. After the desired permitted development option is identified, Section 98-304, Residential density standards, should be referred to for the selected development option(s) in the zoning district(s).
(c) 
Check minimum site area requirement against the gross site area. The required minimum site area (MSA), given in Section 98-304 (Residential density standards) for the development option selected in Subsection (2)(b), and in the zoning district identified in Subsection (1)(b), should be compared with the gross site area (GSA) required on the subject property as determined under the natural resources site evaluation in Subsection (1)(c), above. If the GSA is less than the MSA required by the selected development option, then a different development option must be selected, or additional property should be acquired.
(d) 
Determine maximum gross density permitted on the site. The maximum gross density (MGD), given in Section 98-304 (Residential density standards) for the development option selected in Subsection (2)(b) and the zoning district identified in Subsection (1)(b), above, should be noted; and used in Subsection 2(e), below.
(e) 
Determine the maximum number of units permitted on the site. The maximum gross density (MGD), identified in Subsection (2)(d), above, multiplied by the gross site area (GSA) calculated in Subsection (1)(c), above, equals the maximum number of dwelling units permitted on the subject property under the selected development option within the selected zoning district. The ability to actually develop this number of dwelling units on the subject property is not guaranteed by the provisions of this chapter. Inefficient site design, poor property configuration, and other factors may result in a lower number of units actually fitting on the site.
(f) 
Check the minimum permitted lot area against Table 98-203. The minimum lot area (MLA) requirement given in Section 98-304 (Residential density standards), is the smallest size lot permitted within the selected development option within the selected zoning district. The MLA must equal or be less than the lot size requirement for the type of dwelling unit proposed for the project in Subsection (2)(b)), above. If the MLA given in Section 98-203 is larger than the lot size requirement given in Subsection (2)(b), then a dwelling unit type with a larger lot size must be selected [in which case, it may be advantageous to repeat Subsection 2(a) through (f) using a different dwelling unit type and a different development option].
(3) 
Instructions for only nonresidential development. [For Steps (a) through (c), see Subsection (1), above.] Section 98-305 contains a key to assist with the procedure described below.
(a) 
Determine what types of land uses are permitted. The Table of Uses (Section 98-303) should be checked to determine which types of land uses are permitted within the zoning district present on, or proposed for, the subject property. A complete description of each land use is presented in Section 98-206.
(b) 
Check minimum lot area requirement against gross site area present on the subject property: The required minimum lot area (MLA), given in Section 98-305 (Nonresidential intensity standards) for the zoning district identified in Subsection (1)(b), should be compared with the gross site area (GSA) required on the subject property as determined under the natural resources site evaluation in Subsection (1)(c), above. If the GSA is less than the MLA required by the zoning district, then additional property should be acquired. In other words, the GSA [from Subsection (1)(c)] must be greater than or equal to the MLA [from Subsection 3(b)].
(c) 
Check minimum landscape surface ratio required against the required resource protection area present on the subject property. The required landscape surface ratio (LSR), given in Section 98-305 (Nonresidential intensity standards) for the zoning district identified in Subsection (1)(b), should be multiplied by the gross site area (GSA) use in Subsection (3)(b), above. The resulting product is the area of the site which must be permanently protected as green space. This area should be compared with the required resource protection area (RPA) required on the subject property as determined under the natural resource site evaluation in Subsection (1)(c), above. If the area of the site containing sensitive natural resources exceeds the area of permanently protected landscape surface required, then more floors may have to be used in order to approach maximum development potential on the site. In other words, if the RPA [from Subsection (1)(c)] is greater than the LSR, the use of more floors may permit the development of more floor area on the subject property.
(d) 
Determine maximum floor area ratio permitted on the site. The maximum floor area ratio (FAR) for the zoning district identified in Subsection (1)(b), above, should be noted. This number will be used in Subsection (3)(e) below.
(e) 
Determine the maximum floor area permitted on the site. The maximum floor area ration (FAR), identified in Subsection (3)(d), above, multiplied by the gross site area (GSA) calculated in Subsection (1)(c), above, equals the maximum square footage of gross floor area permitted on the subject property within that zoning district. The ability to actually develop this amount of floor area is not guaranteed by the provisions of this chapter. Inefficient site design, poor property configuration, and other factors may result in a smaller amount of area actually fitting on the site.
(f) 
Check the maximum building size requirement (NC District). The maximum building size (MBS) requirement given in Section 98-305, Nonresidential intensity standards, is the largest size building permitted within the Neighborhood Office and Neighborhood Business Districts. The MBS must equal or be greater than the building size proposed for the project in Subsection (3)(e), above. If the MBS given in Section 98-305 is smaller than the proposed building size calculated in Subsection (3)(e) above, then a smaller building must be built, or the use of additional buildings should be considered.
Rationale: The combinations of maximum floor area ratio (FAR) and minimum landscape surface ratio (LSR) requirements within each zoning district are designed to result in a consistent community character of development within that district. The minimum lot area (MLA) requirements for each zoning district are used to ensure that a consistency of neighborhood character within each zoning district is maintained and that maximum permitted floor area ratios (FARs) are approachable, if not completely attainable, under efficient site design practices. The maximum building size (MBS) requirements ensure that development within the Neighborhood Office and Neighborhood Business Districts retain a neighborhood function and maintains a scale which is compatible with nearby residential development.
[1-19-2022]
(1) 
Blanket conforming status.
(a) 
Blanket conforming status for any and all requirements of this chapter is hereby automatically granted to all development sites in their configuration existing or as finally approved as of passage of this chapter.
(b) 
After passage of this chapter, additional site development that would result in the enlargement, expansion, or extension of uses, structures or other development per Subsection (1)(c)1 through 8, below, will not be allowed to occur without such additional site development being in full compliance with the provisions of this chapter.
(c) 
This subsection is intended to prevent the creation of nonconforming sites related to the building and site design requirements of this chapter. These building and site design components may include one or more of the following:
1. 
Bulk, intensity, and density requirements.
2. 
Exterior building materials requirements.
3. 
Exterior building design requirements.
4. 
Parking, loading, access drive and other paved area design requirements.
5. 
Landscaping requirements.
6. 
Buffer yard requirements.
7. 
Fencing requirements.
8. 
Lighting requirements.
(d) 
This subsection ensures that sites approved prior to INSERT 2014 DATE do not encounter difficulty because they would otherwise be considered nonconforming.
(2) 
All new buildings, structures, and parking areas, including additions, shall comply with all site design requirements of this chapter, including the components of Subsection (1)(c)1 through 8, above, for the new portion of the development.
(3) 
On lots where the site configuration and undeveloped area are sufficient to comply with site design requirements, no enlargement, expansion, or extension of a use, structure, or paving shall be permitted if it makes compliance with the site design requirements of this chapter, including Subsection (1)(c)1 through 8, above, impossible, even if said enlargement, expansion, or extension of the use, structure, or paving would otherwise be permissible.
(4) 
On lots where the configuration and undeveloped area of the nonconforming site provides insufficient space to bring the site into full compliance with all site requirements but nevertheless provides space to reduce the degree of one or more nonconformities, the Plan Commission shall make a determination as to the manner and degree to which each site nonconformities shall be brought into conformance specifically to improve public safety and/or reduce public nuisances.
(5) 
Enlargements, expansions, or extensions that would result in creation of one or more nonconformities, render a nonconforming site incapable of being brought into full or greater compliance with nonconforming site incapable of being brought the degree of existing nonconformities with the site development standards of this chapter shall not be permitted, unless a variance is granted by the Zoning Board of Appeals under Section 98-910.
(6) 
Rationale. The "blanket conforming status" provision of this section is intended to prevent the creation of certain nonconforming developments within the jurisdiction of this chapter. The adoption of the provisions of this section ensures that developments approved prior to the adoption of this chapter do not encounter difficulty in transferring ownership because they would otherwise be considered nonconforming.