The format of an amended plat - director approval shall be the same as the format for a short form final plat.
(Ordinance CO42-07-07-12-3I adopted 7/12/07)
The content of an amended plat - director approval shall be the same as the content requirements for a short form final plat.
(1) 
The city shall require the following note on the amended plat:
This subdivision is subject to all covenants and restrictions appearing on the plat of _____, Lot(s) _____, recorded at Cabinet _____, Slide _____ of the Plat Records of __________ County, Texas.
(Ordinance CO42-07-07-12-3I adopted 7/12/07)
(a) 
The amended plat.
Director approval, prepared by a surveyor, and engineer if required, and bearing their seals shall be submitted to the city for approval before recordation of the plat.
(b) 
Legible prints, as indicated on the application/checklist form shall be submitted to the city along with the following:
(1) 
Completed application forms and the payment of all applicable fees.
(2) 
Certification from all applicable taxing authorities that all taxes due on the property have been paid.
(3) 
Any attendant documents needed to supplement the information provided on the plat.
(Ordinance CO42-07-07-12-3I adopted 7/12/07)
Public notification and public hearings shall not be required for an amended plat - director approval.
(Ordinance CO42-07-07-12-3I adopted 7/12/07)
The Planning Director shall approve any amended plat meeting the requirements of this Chapter within thirty (30) days of receipt of a complete submittal. However, if in the Planning Director’s determination, the amended plat does not satisfy this Chapter, the Planning Director may require the plat to be processed in accordance with the final plat procedures in section 12.06.003 of this Chapter.
(Ordinance CO36-18-08-09-E2 adopted 8/9/18)
Recordation of an amended plat. Director approval shall follow the same recordation provisions of a final plat.
(Ordinance CO42-07-07-12-3I adopted 7/12/07)
Notwithstanding the approval of any amended plat by the planning director, the applicant and the engineer that prepares and submits such plats shall be and remain responsible for the adequacy of the design and nothing in this chapter shall be deemed or construed to relieve or waive the responsibility of the applicant or his/her engineer for or with respect to any plat submitted.
(Ordinance CO42-07-07-12-3I adopted 7/12/07)