This section pertains to furnishing all labor, materials, equipment, supervision, and tools for the installation of pipe within an encasement pipe or within a bored or tunneled hole without encasement. Steel encasement pipe shall be installed at the locations designated on the plans.
(Ordinance 2007-106, App. B, adopted 3/20/07)
Section 02222 Excavation, Trenching, and Backfilling for Utilities
Section 02229 Excavation Safety
(Ordinance 2007-106, App. B, adopted 3/20/07)
Unless otherwise indicated on the Bid Form, the measurement and payment for the work specified in this Section shall be as follows:
Casing pipe installed by bore, including carrier pipe, and the construction of a bored hole for pipe without casing, including the pipe within the bored hole, shall be measured by the linear foot. Payment shall be made at the unit price bid for all labor, materials, equipment, etc. required for the completed casing with carrier pipe or carrier pipe installation by bore. Where installation of the casing pipe is allowed by open cut, payment shall be made at the unit price bid for casing installed by open cut, including the carrier pipe. When required at railroad crossings, no separate payment shall be made for any cathodic protection when required for the carrier pipe or casing.
(Ordinance 2007-106, App. B, adopted 3/20/07)
The applicable provisions of the following standards shall apply as if written here in their entirety:
AASHTO American Association of State Highway and Transportation Officials
ASTM American Society of Testing and Materials
AWWA American Water Works Association
(Ordinance 2007-106, App. B, adopted 3/20/07)