The permitted and conditionally permitted uses in this zone shall be governed by Section 17.04.010 and other specific use requirements contained in this title.
(Prior code § 27-14.1; Ord. 05-1561 § 1; Ord. 10-1626 § 5; Ord. 20-1720 § 2; Ord. 21-1722 § 2)
No building or structure in a C-M zone shall exceed two stories or 35 feet in height, whichever is less, except that greater heights may be permitted subject to the issuance, existence, and validity of a conditional use permit.
(Prior code § 27-14.3; Ord. 21-1722 § 2)
A. 
When a lot or parcel in a C-M zone contains part of the frontage in a block and a portion of the frontage in such block belongs to lots or parcels zoned for residential use primarily, the front yard of every lot or parcel in the C-M zone shall conform to the front yard requirement of such residential zone and the front yard shall be landscaped and permanently maintained as required by Section 17.06.240.
B. 
Every lot or parcel in the C-M zone shall have a front yard of not less than 10 feet. No structure, building, wall or fence shall be within the required front yard as measured from the property line adjacent to the public right-of-way. The space between the building wall, structure or fence and the front property line shall be landscaped and permanently maintained as required by Chapter 17.03, Article I.
(Prior code § 27-14.4; Ord. 15-1665 § 11; Ord. 21-1722 § 2)
No side yard is required in the C-M zone except for the street side of a corner lot where the setback shall be 10 feet. No structure, building, wall or fence shall be within the required side yard measured from the property line adjacent to the public right-of-way. The space between the building, wall, structure or fence and the side property line shall be landscaped and permanently maintained as required by Chapter 17.03, Article I. For side yard requirements for industrial properties abutting residential zones, Section 17.03.330 applies.
(Prior code § 27-14.5; Ord. 15-1665 § 12; Ord. 21-1722 § 2)
Every lot and every parcel in a C-M zone and which abuts upon property in an R zone, and which does not abut upon an alley or other commercially zoned properties, shall provide a rear yard of not less than five feet. For properties that abut an alley or other commercially zoned properties, no rear yard is required in the C-M zone. No structure, building, wall or fence shall be within the required rear yard as measured from the property line adjacent to the public right-of-way. The space between the building or structure and the rear property line shall be landscaped and permanently maintained as required by Chapter 17.03, Article I. For rear yard requirements for industrial properties abutting residential zones, Section 17.03.330 applies.
(Prior code § 27-14.6; Ord. 15-1665 § 13; Ord. 21-1722 § 2)
A. 
There shall be provided and maintained an enclosure for the purpose of storing garbage, waste, refuse and trash of all persons utilizing the parcel. Such enclosure shall have on each side thereof a solid reinforced masonry wall of not less than five feet in height except for openings. All openings shall be equipped with solid, view obscuring gates or doors which meet the height requirement of this section and the fence requirements for durability. Such gates or doors shall be equipped at all times with a fully operating, self-closing device. At least one opening or gate or door shall be of sufficient width to provide reasonable and necessary access to the storage area and the opening door or gate shall at all times be located and maintained at such a place and in such fashion that access to the storage area for the deposit and removal of waste, trash, refuse an garbage is reasonably afforded. The City may approve substitution of a solid fence or other material when in its opinion such fence or other material will adequately comply with the provisions of this section.
B. 
All garbage stored within such enclosure shall be placed and maintained in a metal or plastic container which has an overlapping fly-tight lid. The lid shall be secured in place at all times when the container is not being filled or emptied.
C. 
Waste, refuse and trash, other than garbage shall be placed, maintained and stored in a container of substantial design and construction that will retain therein the trash, refuse and waste and may be readily emptied by trash collectors and which, further, do not readily disintegrate, fall apart, blow, or scatter about the premises.
D. 
Garbage, waste, refuse and trash may also be stored in metal bins equipped with wheels approved by the Director. All garbage, waste, refuse and trash contained in such bins shall be maintained within the interior of the metal bins and shall be equipped with a lid which shall be completely closed at all times except when being filled or emptied.
E. 
All of the aforementioned containers shall be kept and maintained within the walls of the enclosure except when being emptied by a collector.
F. 
There shall be provided and maintained within the storage area trash containers, as aforementioned, of not less than 50 gallon capacity.
G. 
No person shall deposit, maintain, accumulate, dispose of, or allow the deposit, accumulation, maintenance of any disposal of any garbage, waste, refuse or trash outside of a building except as authorized in this chapter.
(Prior code § 27-14.8; Ord. 21-1722 § 2)
In the evaluation of proposed developments, the following provisions shall be considered desirable development standards reflecting the spirit and intent of the C-M (commercial-manufacturing) zone. Developments shall incorporate these and similar architectural treatments and features using quality building materials to the maximum extent feasible.
A. 
Architectural treatments such as accent color bands, ceramic tile inserts and special entry paving.
B. 
Architectural features such as multi-level roof lines, wall offsets, towers, and sign bands.
(Prior code § 27-14.9; Ord. 21-1722 § 2)