Buildings and other structures shall maintain the standard building setbacks per the underlying zoning district, depending on the site orientation, from all critical area buffer tracts or easements or 10 feet from the edges of all critical areas, if no buffers are required, to ensure adequate width for construction staging, maintenance and repair of primary buildings and accessory structures and use of improvements without disturbing the critical area buffer or critical area.
The following may be allowed in the building setback area:
(b) Building overhangs, if such overhangs do not extend more than 18 inches into the setback area;
(c) Impervious ground surfaces, such as driveways and patios; provided, that such improvements may be subject to water quality regulations as adopted;
(d) Accessory structures less than 200 square feet may be set back five feet; and
(e) Fences and walls are exempt when the fence or wall further separates incompatible uses outside of the critical area and its associated buffer and when any temporary or permanent impacts are mitigated according to this chapter and in compliance with other provisions of this title, based on the recommendation of a qualified professional for the specific critical area type.
(Ord. 741, Sec. 2, 2007; Ord. 773, Sec. 2, 2008; Ord. 984 Sec. 3 (Exh. C), 2019)