The following provisions identify the types of signs, number of signs, sign surface area, and sign setbacks permitted by specific zoning district classifications.
A. Commercial and industrial district signs.
1. Wall signs. Each individual commercial or industrial establishment shall be permitted multiple wall signs. The area of all permanent wall signs or building signs for any single business enterprise shall be limited according to the area of the building facade or part of building occupied by such enterprise. For the purposes of this section, area shall be measured along the building face nearest parallel to the street line.
(a) For lots located along one public street: The total area of all wall signs shall be limited to 15% of the facade fronting the street not to exceed 70 square feet. No individual wall sign shall exceed 50 square feet.
(b) In the case of a corner lot that has at least 150 feet of frontage on two intersecting public streets: Wall signs can be placed on either facade fronting on a street. The total area of all wall signs (on both facades) shall be limited to 15% of the area of one of the building's facades fronting the street but shall not exceed 70 square feet. No individual wall sign shall exceed 50 square feet.
(c) In the case of a double front lot that has at least 150 feet of frontage on two public streets that do not intersect at the lot's boundaries wall signs can be placed on either facade fronting on a street. The total area of all wall signs (on both facades) shall be limited to 15% of the area of one of the building's facades fronting the street but shall not exceed 70 square feet. No individual wall sign shall exceed 50 square feet.
2. Freestanding signs. In a commercial or industrial district, each parcel upon which a commercial or industrial use is located shall be permitted one permanent freestanding sign.
(a) If the parcel's frontage is less than 200 feet, the parcel shall be permitted one ground/monument sign.
(b) If the parcel's frontage is 200 feet or greater, the parcel shall be allowed either one ground/monument sign or one pole/pylon sign.
 Figure 1: Pylon Sign Example |
(c) Freestanding signs shall be limited to 35 square feet except as provided for in §
208-710 for corner lots or for sites with multiple uses. The height of freestanding signs shall not exceed 25 feet or the main cornice line of the building, whichever is more restrictive. To encourage the reduction in height of freestanding signs, an increase of 20% of the sign area will be allowed if a freestanding sign is not more than seven feet in height. Such signs shall be located a minimum distance from the right-of-way line or adjoining lot line according to the chart for allowable increases. Such signs shall be located a minimum distance of 50 feet from any residential or conservation district. Freestanding signs shall be supported by one or more columns or uprights which are firmly embedded in the ground. Exposed guy wires, chains or other connections shall not be made a permanent support of the freestanding sign.
Table 17: Allowable Increases in Sign Area |
|---|
Sign Height (feet) | Minimum Setback (feet) | Maximum Area (sq. ft.) Excluding Bonuses in § 208-709 |
|---|
7 or less | 10 | 42 (includes 20% bonus) |
7.01 to 10 | 15 | 35 |
10.01 to 15 | 20 | 35 |
15.01 to 25 | 25 | 35 |
Highway signs in accordance with §
208-712.
B. Residential district signs.
1. Home occupation signs. Home occupations for which a sign is required by county, state or federal regulations, one sign, a maximum of four square feet in sign area, is permitted.
(a) Signs for home occupations shall be set back a minimum of 10 feet from any street right-of-way line or adjoining lot line.
(b) Signs for home occupations shall not be illuminated.
2. Wall signs. For nonresidential uses other than home occupations in residential districts, one building or wall sign is permitted for a single lot.
(a) The area of all permanent building or wall signs for any single business enterprise shall be limited to 10% of the area of the building facade of the building occupied by such enterprise. In no instance shall the sign area exceed 40 square feet.
(b) For the purposes of this section, the area of the building facade shall be measured along the building face nearest parallel to the street line. In the case of a corner lot, either frontage may be used in determining area, but the frontage selected shall be considered the front wall of the building for the purposes of determining the maximum area of the sign.
3. Freestanding signs. For nonresidential uses other than home occupations in residential districts, one permanent freestanding sign is permitted for a single lot.
(a) Freestanding signs are limited to 15 square feet in sign area. The height of freestanding signs shall not exceed six feet or the main cornice line of the building, whichever is more restrictive. Such signs shall be located a minimum distance of 20 feet from the street right-of-way line or adjoining lot line.