[Amended 3-9-2026 by Ord. No. 2026-15]
(Per N.J.A.C. 5:93 as may be updated per various sections in N.J.A.C. 5:97 and N.J.S.A. 52:27D-301 et seq.). Per the definition of "new construction," this section governs the creation of new affordable housing units regardless of the means by which the units are created. Newly constructed units may include new residences constructed or created through other means.
(a)
The following requirements shall apply to all new or planned developments that contain very-low-, low- and moderate-income housing units. To the extent possible, details related to the adherence to the requirements below shall be outlined in the resolution granting municipal subdivision or site plan approval of the project to assist municipal representatives, developers and administrative agents.
(b)
Completion schedule (previously known as "phasing"). Final site plan or subdivision approval shall be contingent upon the affordable housing development meeting the following completion schedule for very-low-, low- and moderate-income units whether developed in a single-phase development, or in a multi-phase development:
Maximum Percentage of Market-Rate Units Issued a Temporary or Final Certificate of Occupancy | Minimum Percentage of Affordable Units Issued a Temporary or Final Certificate of Occupancy |
|---|---|
25+1 | 10 |
50 | 50 |
75 | 75 |
90 | 100 |
(c)
Design. The following design requirements apply to affordable housing developments, excluding prior round units.
(1)
Design of 100% affordable developments:
a.
Restricted units must meet the minimum unit square footage required and the minimum square footage required for each bedroom, as set forth in the Neighborhood Preservation Balanced Housing rules at N.J.A.C. 5:43-2.4.
b.
Each bedroom in each restricted unit must have at least one window.
c.
Restricted units must include adequate air conditioning and heating.
(2)
Design of developments comprising market-rate rental units and restricted rental units. The following does not apply to prior round units, unless stated otherwise.
a.
Restricted units must use the same building materials and architectural design elements (for example, plumbing, insulation, or siding) as market-rate units of the same unit type (for example, flat or townhome) within the same development, except that restricted units and market-rate units may use different interior finishes. This shall apply to prior round units.
b.
Restricted units and market-rate units within the same affordable development must be sited such that restricted units are not concentrated in less desirable locations.
c.
Restricted units may not be physically clustered so as to segregate restricted and market-rate units within the same development or within the same building, but must be interspersed throughout the development, except that age-restricted and supportive housing units may be physically clustered if the clustering facilitates the provision of on-site medical services or on-site social services. Prior round affordable units shall be integrated with market-rate units to the extent feasible.
d.
Residents of restricted units must be offered the same access to communal amenities as residents of market-rate units within the same affordable development. Examples of communal amenities include, but are not limited to, community pools, fitness and recreation centers, playgrounds, common rooms and outdoor spaces, and building entrances and exits. This shall apply to prior round units.
e.
Restricted units must include adequate air conditioning and heating and must use the same type of cooling and heating sources as market-rate units of the same unit type. This shall apply to prior round units.
f.
Each bedroom in each restricted unit must have at least one window.
g.
Restricted units must be of the same unit type as market-rate units within the same building.
h.
Restricted units and bedrooms must be no less than 90% of the minimum size prescribed by the Neighborhood Preservation Balanced Housing rules at N.J.A.C. 5:43-2.4.
(3)
Design of developments containing for-sale units, including those with a mix of rental and for-sale units. Restricted rental units shall meet the requirements of subsection (c)(2) above. Restricted sale units shall comply with the below:
a.
Restricted units must use the same building standards as market-rate units of the same unit type (for example, flat, townhome, or single-family home), except that restricted units and market-rate units may use different interior finishes. This shall apply to prior round units.
b.
Restricted units may be clustered, provided that the buildings or housing product types containing the restricted units are integrated throughout the development and are not concentrated in an undesirable location or in undesirable locations. Prior round affordable units shall be integrated with market-rate units to the extent feasible.
c.
Restricted units may be of different unit housing product types than market-rate units, provided that there is a restricted option available for each market-rate housing type. Developments containing market-rate duplexes, townhomes, and/or single-family homes shall offer restricted housing options that also include duplexes, townhomes, and/or single-family homes. Penthouses and higher priced end townhouses may be exempt from this requirement. The proper ratio for restricted to market-rate unit type shall be subject to municipal ordinance or, if not specified, shall be determined at the time of site plan approval.
d.
Restricted units must meet the minimum unit square footage required and the minimum square footage required for each bedroom, as set forth in the Neighborhood Preservation Balanced Housing rules at N.J.A.C. 5:43-2.4.
e.
Penthouse and end units may be reserved for market-rate sale, provided that the overall number, value, and distribution of affordable units across the development is not negatively impacted by such reservation(s).
f.
Residents of restricted units must be offered the same access to communal amenities as residents of market-rate units within the same affordable development. Examples of communal amenities include, but are not limited to, community pools, fitness and recreation centers, playgrounds, common rooms and outdoor spaces, and building entrances and exits. This shall apply to prior round units.
g.
Each bedroom in each restricted unit must have at least one window.
h.
Restricted units must include adequate air conditioning and heating.
(d)
Utilities.
(1)
Affordable units shall utilize the same type of cooling and heating source as market-rate units within the affordable housing development.
(2)
Tenant-paid utilities that are included in the utility allowance shall be so stated in the lease and shall be consistent with the utility allowance in accordance with N.J.A.C. 5:80-26.13(e).
(e)
Low/moderate split and bedroom distribution.
(1)
Affordable units shall be divided equally between low- and moderate-income units, except that where there is an odd number of affordable housing units, the extra unit shall be a low-income unit.
(2)
In each affordable housing development, at least 50% of the restricted units within each bedroom distribution rounded up to the nearest whole number, shall be very-low- or low-income units. A developer may request from the governing body a waiver of the requirement to round up, upon demonstration that strict adherence to this requirement would cause undue hardship or would be site-infeasible.
(3)
Within rental developments, of the total number of affordable rental units, at least 13%, rounded up to the nearest whole number, shall be affordable to very-low-income households. The very-low-income units shall be distributed between each bedroom count as proportionally as possible, to the nearest whole unit, to the total number of restricted units within each bedroom count, and counted as part of the required number of low-income units within the development.
(4)
Affordable housing developments that are not age-restricted or supportive housing shall be structured such that:
a.
At a minimum, the number of bedrooms within the restricted units equals twice the number of restricted units;
b.
Two-bedroom and/or three-bedroom units compose at least 50% of all restricted units;
c.
The combined number of efficiency and one-bedroom units shall be no greater than 20%, rounded down, of the total number of low- and moderate-income units. A developer may request from the governing body a waiver of the requirement to round down, upon demonstration that strict adherence to this requirement would cause undue hardship or would be site-infeasible.
d.
At least 30% of all low- and moderate-income units, rounded up, shall be two-bedroom units. A developer may request from the governing body a waiver of the requirement to round up, upon demonstration that strict adherence to this requirement would cause undue hardship or would be site-infeasible.
e.
At least 20% of all low- and moderate-income units, rounded up shall be three-bedroom units. A developer may request from the governing body a waiver of the requirement to round up, upon demonstration that strict adherence to this requirement would cause undue hardship or would be site-infeasible.
f.
The remaining units may be allocated among two- and three- bedroom units at the discretion of the developer.
(5)
Affordable housing developments that are age-restricted or supportive housing, except those supportive housing units whose sponsoring program determines the unit arrangements, shall be structured such that, at a minimum, the number of bedrooms shall equal the number of age-restricted or supportive housing low- and moderate-income units within the inclusionary development. Supportive housing units whose sponsoring program determines the unit arrangement shall comply with all requirements of the sponsoring program. The standard may be met by having all one-bedroom units or by having a two-bedroom unit for each efficiency unit. In affordable housing developments with 20 or more restricted units that are age-restricted or supportive housing, two-bedroom units must comprise at least 5% of those restricted units.
(f)
Accessibility requirements.
(1)
Any new construction shall be adaptable; however, elevators shall not be required in any building or within any dwelling unit for the purpose of compliance with this section. In buildings without elevator service, only ground floor dwelling units shall be required to be constructed to conform with the technical design standards of the Barrier Free Subcode. "Ground floor" means the first floor with a dwelling unit or portion of a dwelling unit, regardless of whether that floor is at grade. A building may have more than one ground floor.
(2)
Notwithstanding the exemption for townhouse dwelling units in the Barrier Free Subcode, the first floor of all townhouse dwelling units and of all other multifloor dwelling units that are attached to at least one other dwelling unit shall be subject to the technical design standards of the barrier free subcode and shall include the following features:
a.
An adaptable toilet and bathing facility on the first floor;
b.
An adaptable kitchen on the first floor;
c.
An interior accessible route of travel; however an interior accessible route of travel shall not be required between stories;
d.
An adaptable room that can be used as a bedroom, with a door, or the casing for the installation of a door that is compliant with the Barrier Free Subcode, on the first floor;
e.
If not all of the foregoing requirements in subsection (f)(2)a through d can be satisfied, then an interior accessible route of travel shall be provided between stories within an individual unit; and
f.
An accessible entranceway as set forth in P.L. 2005, c. 350 (N.J.S.A. 52:27D-311a et seq.) and the Barrier Free Subcode, N.J.A.C. 5:23-7, or evidence that the municipality has collected funds from the developer sufficient to make 10% of the adaptable entrances in the development accessible:
1.
Where a unit has been constructed with an adaptable entrance, upon the request of a disabled person who is purchasing or will reside in the dwelling unit, an accessible entrance shall be installed.
2.
To this end, the builder of restricted units shall deposit funds within the Affordable Housing Trust Fund sufficient to install accessible entrances in 10% of the affordable units that have been constructed with adaptable entrances.
3.
The funds deposited shall be expended for the sole purpose of making the adaptable entrance of an affordable unit accessible when requested to do so by a person with a disability who occupies or intends to occupy the unit and requires an accessible entrance.
4.
The developer of the restricted units shall submit to the Construction Official a design plan and cost estimate for the conversion from adaptable to accessible entrances.
5.
Once the Construction Official has determined that the design plan to convert the unit entrances from adaptable to accessible meets the requirements of the Barrier Free Subcode, N.J.A.C. 5:23-7, and that the cost estimate of such conversion is reasonable, payment shall be made to the Affordable Housing Trust Fund and earmarked appropriately.
g.
Full compliance with the foregoing provisions shall not be required where an entity can demonstrate that it is "site-impracticable" to meet the requirements. If full compliance with this section would be site impracticable, compliance with this section for any portion of the dwelling shall be required to the extent that it is not site impracticable. Determinations of site impracticability shall comply with the Barrier Free Subcode at N.J.A.C. 5:23-7.