The LI Light Industrial District is designed to provide an environment
suitable for industrial activities that do not create appreciable
nuisances or hazards, or that require a pleasant, hazard- and nuisance-free
environment. Uses may include some retail and wholesale business,
as well as warehousing, storage and limited, low intensive manufacturing
uses.
[Amended 10-7-2019 by Ord. No. 2019-18; 5-17-2022 by Ord. No. 2022-10; 5-6-2024 by Ord. No. 2024-008]
Permitted uses shall be as defined in Table 5: Land Use Regulations
and Matrix of Land Uses.
Lot requirements with public sewer shall be as follows:
A. Area: 20,000 square feet minimum.
B. Zoning lot frontage: 150 feet minimum. Such minimum lot frontage
may be measured at the building setback line if said lot is located
on the outer radius of a street, such as a cul-de-sac. In no case
shall lot frontage measured at the right-of-way line of a cul-de-sac
or curved street be less than 85 feet.
C. Lot depth: 150 feet minimum.
Lot requirements without public sewer shall be as follows:
A. Area: 60,000 square feet minimum.
B. Zoning lot frontage: 150 feet minimum. Such minimum lot frontage
may be measured at the building setback line if said lot is located
on the outer radius of a curved street or a cul-de-sac. In no case
shall the lot frontage measured at the right-of-way line of a cul-de-sac
or curved street be less than 85 feet.
C. Lot depth: 150 feet minimum.
Height regulations shall be as follows:
A. Primary structure: 45 feet maximum, except as provided in §
135-13, Height regulations.
There shall be no limitations as to the number of buildings
located on a lot.
Seventy-five percent of total lot area may contain building
coverage and/or hard surface. Twenty-five percent of the total lot
area shall remain green space.
Parking shall conform to requirements as set forth in Article
XXI, Parking Requirements.