This article shall be known as and may be cited
as the “Mechanical Code of the City of Nashua, New Hampshire.”
[Amended 3-9-2021 by Ord. No. O-21-045]
A certain document and referenced code on file
in the Department of Building Safety of the City of Nashua, New Hampshire,
being marked and designated as the "International Mechanical Code,"
adopted as per the New Hampshire State Building Code per RSA 155-A
and as published by the International Code Council, Inc., including
the technical provisions of the NFPA 54 and NFPA 58 as adopted per
the State of New Hampshire, and any amendments adopted thereto, is
hereby adopted as the Mechanical Code of the City of Nashua, in the
State of New Hampshire, for the control of buildings and building
systems; and the regulations, provisions, penalties, conditions and
terms of said code are hereby referred to, adopted and made part hereof
as if fully set out in this chapter, with any amendments prescribed
in this article.
A.
Amend Section 101.1 by inserting: the City of Nashua.
B.
Amend Section 106.5.2 by changing it to read:
106.5.2. Fee schedule. The fees
for mechanical work shall be as provided for by this chapter.
|
C.
Delete Section 106.5.3.
D.
Amend Sections 108.4 and 108.5 by adding the following
statement:
In place of the insertions in the model code
text, it shall be clearly understood that all violations of the adopted
codes of the City of Nashua shall be subject to the provisions of
RSA 676:15-17, without limitation of any remedy available to the City
of Nashua at law or equity.[1]
|
[1]
Editor's Note: Former Subsection E, which immediately followed
this subsection, was repealed 3-9-2021 by Ord. No. O-21-045.