A.
In all districts in which the types of buildings and
uses specified hereinafter are permitted by this chapter, off-street
parking and off street loading facilities in connection with such
buildings erected after the adoption of this chapter, and any extension,
addition or enlargement of such buildings or existing buildings, shall
be provided in the amount not less than as hereinafter specified.
B.
Standard off-street parking space or spaces, with
proper and safe access from the street, shall be provided within a
structure or in the open to serve adequately the uses on each lot
within the district. Enclosed parking must he architecturally similar
and designed to integrate with the style of the building in which
it is located.
[Added 5-16-2005 by Ord. No. 9-05]
The amount of required off-street parking facilities
as set forth in this Article shall be determined in accordance with
the following schedule:
A.
For a church, auditorium, theater, stadium, recreational
establishment or similar use involving the assembly of persons: one
parking space for each six seats or equivalent accommodation provided.
B.
For an office building, professional building or similar
use: one parking space for each 400 square feet of floor area.
C.
For each retail store, shop, bank or similar establishment:
one parking space for each 200 square feet of first-floor retail merchandising
or commercial area and one parking space for each 400 square feet
of such area above or below the first floor.
D.
For a restaurant or similar place dispensing food,
drink or refreshments: one parking space for each 50 square feet of
floor area devoted to patron use.
E.
For a manufacturing establishment or industrial plant:
one parking space for each 400 square feet of floor area exclusive
of storage space.
A.
For any building or premises used for commercial,
industrial or storage purposes, indoor or outdoor space for loading
and unloading of goods and materials shall be provided on the premises
whenever the aggregate area used for such purpose is 6,000 square
feet or more, in accordance with the following schedule:
B.
Each loading space shall be at least 25 feet long
and 10 feet wide. The minimum clear height of such space within a
building shall be 12 feet.
[Amended 5-16-2005 by Ord. No. 9-05]
Parking space for one vehicle shall equal at
least nine feet by 18 feet in size and shall have an all-weather surface
to provide convenient access in all seasons.
[Amended 7-12-1993 by Ord. No 3-93]
A.
The off-street parking facilities required for the
uses specified in this Article and for other similar uses shall be
on the same lot or parcel of land as the building they are intended
to serve unless adequate nearby facilities shall have been approved
by the appropriate approving authority.
B.
Vehicles shall not be permitted in the front yard
of a dwelling unless they meet the following conditions:
(1)
The minimum lot width, measured at the front property
line, shall be 40 feet.
(2)
The parking space shall be located a minimum of three
feet from any side or rear lot line.
(3)
The parking space shall be screened from the adjacent
property by a dense and continuous evergreen landscape buffer, the
screen shall consist of a mixture of evergreen shrubs planted at a
minimum height of 15 inches and a maximum height of 24 inches.
(4)
A plot plan shall be submitted to the Board for review
and approval. The Board may refer the plan to its Engineer who shall
review the plan submitted for adequate drainage, safety and construction
or any other issues that the Board deems necessary. The plan shall
include the location of all utility poles, utility markers (manholes,
etc.), trees, sidewalks, residences and any other information necessary
for the Board to properly assess the application.
(5)
The parking space shall not encroach into the right-of-way
and must be wholly and entirely contained within the property containing
the dwelling and conform to the standards contained in Section 150-17.B.
(6)
Where a site occupies a corner to two intersecting
roads, no driveway entrance or exit may be located within a minimum
of 30 feet of the tangent of the existing or proposed curb radius
of that site.
C.
Each residential lot may have one curb cut and driveway.
Circular driveways are prohibited.
D.
No driveway shall be located on a traffic circle.
[Amended 4-9-84 by Ord. No. 3-84; 7-12-1993 by Ord. No. 3-93]
A.
All off-street parking facilities required pursuant
to the provisions of this Article shall be paved with asphalt or concrete,
drained, lighted and maintained and such facilities shall be arranged
for convenient access and safety for pedestrians and vehicles. In
the interest of safety, such facilities shall have adequate means
of access to and egress from a street and such access and egress driveways
shall be at least 10 feet wide.
B.
Residential Parking Facilities.
(1)
The parking space shall be a minimum of eight feet
wide by 18 feet deep. The maximum size for a single parking space
shall be no greater than 10 feet wide by 20 feet deep.
(2)
The driveway shall be constructed with a slope no
greater than eight percent for the entire length of the driveway.
(3)
Driveways shall not form an angle smaller than 90
degrees with any road.
C.
Construction.
(1)
All existing curbs shall be replaced with a depressed
curb as per Borough Engineer requirements.
(2)
A driveway apron shall be constructed between the
curb and sidewalk. The driveway apron and sidewalk shall be constructed
of 6" thick Class B concrete.
(3)
The driveway shall be constructed of a paved material.
[Added 2-21-2023 by Ord. No. 3-2023]
A.
Purpose. The purpose of this section is to promote and encourage
the use of electric vehicles by requiring the safe and efficient installation
of EVSE and make-ready parking spaces through municipal parking regulations
and other standards. EVSE and make-ready parking spaces will support
the state's transition to an electric transportation sector,
reducing automobile air pollution, greenhouse gas emissions, and stormwater
runoff contaminants. The goals are to:
(1)
Provide adequate and convenient EVSE and make-ready parking
spaces to serve the needs of the traveling public.
(2)
Provide opportunities for residents to have safe and efficient
personal EVSE located at or near their place of residence.
(3)
Provide the opportunity for nonresidential uses to supply EVSE
to their customers and employees.
(4)
Create standard criteria to encourage and promote safe, efficient,
and cost-effective electric vehicle charging opportunities in all
zones and settings for convenience of service to those that use electric
vehicles.
B.
CERTIFICATE OF OCCUPANCY
CHARGING LEVEL
(1)
(2)
(3)
ELECTRIC VEHICLE
ELECTRIC VEHICLE SUPPLY/SERVICE EQUIPMENT or (EVSE)
MAKE-READY PARKING SPACE
PRIVATE EVSE
PUBLICLY ACCESSIBLE EVSE
Definitions. As used in this section, the following terms shall have
the meanings indicated:
The certificate provided for in N.J.A.C. 5:23-2, indicating
that the construction authorized by the construction permit has been
completed in accordance with the construction permit, the act and
the regulations. See "State Uniform Construction Code Act," P.L. 1975,
c. 217 (N.J.S.A. 52:27D-119 et seq.) and regulations adopted pursuant
thereto.
The amount of voltage provided to charge an electric vehicle
varies depending on the type of EVSE as follows:
Level 1 operates on a fifteen- to twenty-amp breaker on a 120-volt
AC circuit.
Level 2 operates on a forty- to 100-amp breaker on a 208- or
240-volt AC circuit.
Direct-current fast charger (DCFC) operates on a sixty-amp or
higher breaker on a 480-volt or higher three-phase circuit with special
grounding equipment. DCFC stations can also be referred to as rapid
charging stations that are typically characterized by industrial-grade
electrical outlets that allow for faster recharging of electric vehicles.
Any vehicle that is licensed and registered for operation
on public and private highways, roads, and streets; and operates either
partially or exclusively using an electric motor powered by an externally
charged on-board battery.
The equipment, including the cables, cords, conductors, connectors,
couplers, enclosures, attachment plugs, power outlets, power electronics,
transformer, switchgear, switches and controls, network interfaces,
point of sale equipment, and associated apparatus designed and used
for the purpose of transferring energy from the electric supply system
to a plug-in electric vehicle. "EVSE" may deliver either alternating
current or, consistent with fast charging equipment standards, direct
current electricity. "EVSE" is synonymous with "electric vehicle charging
station." (Note: Definition is directly from legislation and cannot
be changed.)
The prewiring of electrical infrastructure at a parking space,
or set of parking spaces, to facilitate easy and cost-efficient future
installation of electric vehicle supply equipment or electric vehicle
service equipment, including, but not limited to, Level Two EVSE and
direct-current fast chargers. Make-ready includes expenses related
to service panels, junction boxes, conduit, wiring, and other components
necessary to make a particular location able to accommodate electric
vehicle supply equipment or electric vehicle service equipment on
a "plug and play" basis. "Make-ready" is synonymous with the term
"charger ready," as used in P.L. 2019, c. 362 (N.J.S.A. 48:25-1 et
seq.).
EVSE that has restricted access to specific users (e.g.,
single- and two-family homes, executive parking fleet parking with
no access to the general public).
EVSE that is publicly available (e.g., park and ride, public
parking lots and garages, on-street parking, shopping center parking,
nonreserved parking in multifamily parking lots, etc.).
C.
Approvals and permits.
(1)
An application for development submitted solely for the installation
of EVSE or make-ready parking spaces shall be considered a permitted
accessory use and permitted accessory structure in all zoning or use
districts and shall not require a variance pursuant to N.J.S.A. 40:55D-70.
(3)
All EVSE and make-ready parking spaces shall be subject to applicable
local and/or Department of Community Affairs permit and inspection
requirements.
(4)
The Brooklawn Zoning Officer and/or the Municipal Engineer shall
enforce all signage and installation requirements described in this
section. Failure to meet the requirements in this section shall be
subject to the same enforcement and penalty provisions as other violations
of Brooklawn's land use regulations.
(5)
An application for development for the installation of EVSE
or make-ready spaces at an existing gasoline service station, an existing
retail establishment, or any other existing building shall not be
subject to site plan or other land use board review, shall not require
variance relief pursuant to N.J.S.A. 40:55D-1 et seq. or any other
law, rule, or regulation, and shall be approved through the issuance
of a zoning permit by the administrative officer, provided the application
meets the following requirements:
(a)
The proposed installation does not violate bulk requirements
applicable to the property or the conditions of the original final
approval of the site plan or subsequent approvals for the existing
gasoline service station, retail establishment, or other existing
building;
(b)
All other conditions of prior approvals for the gasoline service
station, the existing retail establishment, or any other existing
building continue to be met; and
(c)
The proposed installation complies with the construction codes
adopted in or promulgated pursuant to the "State Uniform Construction
Code Act," P.L. 1975, c. 217 (N.J.S.A. 52:27D-119 et seq.), any safety
standards concerning the installation, and any state rule or regulation
concerning electric vehicle charging stations.
(6)
An application pursuant to Subsection C(5) above shall be deemed complete if:
(a)
The application, including the permit fee and all necessary
documentation, is determined to be complete;
(b)
A notice of incompleteness is not provided within 20 days after
the filing of the application; or
(c)
A one-time written correction notice is not issued by the Brooklawn
Zoning Officer within 20 days after filing of the application detailing
all deficiencies in the application and identifying any additional
information explicitly necessary to complete a review of the permit
application.
(7)
EVSE and make-ready parking spaces installed at a gasoline service
station, an existing retail establishment, or any other existing building
shall be subject to applicable local and/or Department of Community
Affairs inspection requirements.
(8)
A permitting application solely for the installation of electric
vehicle supply equipment permitted as an accessory use shall not be
subject to review based on parking requirements.
D.
Requirements for new installation of EVSE and make-ready parking
spaces.
(1)
As a condition of preliminary site plan approval, for each application
involving a multiple dwelling with five or more units of dwelling
space, which shall include a multiple dwelling that is held under
a condominium or cooperative form of ownership, a mutual housing corporation,
or a mixed-use development, the developer or owner, as applicable,
shall:
(a)
Prepare as make-ready parking spaces at least 15% of the required
off-street parking spaces, and install EVSE in at least 1/3 of the
15% of make-ready parking spaces;
(b)
Within three years following the date of the issuance of the
certificate of occupancy, install EVSE in an additional 1/3 of the
original 15% of make-ready parking spaces; and
(c)
Within six years following the date of the issuance of the certificate
of occupancy, install EVSE in the final 1/3 of the original 15% of
make-ready parking spaces.
(d)
Throughout the installation of EVSE in the make-ready parking
spaces, at least 5% of the electric vehicle supply equipment shall
be accessible for people with disabilities.
(e)
Nothing in this subsection shall be construed to restrict the
ability to install electric vehicle supply equipment or make-ready
parking spaces at a faster or more expansive rate than as required
above.
(2)
As a condition of preliminary site plan approval, each application involving a parking lot or garage not covered in Subsection D(1) above shall:
(a)
Install at least one make-ready parking space if there will
be 50 or fewer off-street parking spaces.
(b)
Install at least two make-ready parking spaces if there will
be 51 to 75 off-street parking spaces.
(c)
Install at least three make-ready parking spaces if there will
be 76 to 100 off-street parking spaces.
(d)
Install at least four make-ready parking spaces, at least one
of which shall be accessible for people with disabilities, if there
will be 101 to 150 off-street parking spaces.
(e)
Install at least 4% of the total parking spaces as make-ready
parking spaces, at least 5% of which shall be accessible for people
with disabilities, if there will be more than 150 off-street parking
spaces.
(f)
In lieu of installing make-ready parking spaces, a parking lot
or garage may install EVSE to satisfy the requirements of this subsection.
(g)
Nothing in this subsection shall be construed to restrict the
ability to install electric vehicle supply equipment or make-ready
parking spaces at a faster or more expansive rate than as required
above.
(h)
Notwithstanding the provisions of this section, a retailer that
provides 25 or fewer off-street parking spaces or the developer or
owner of a single-family home shall not be required to provide or
install any electric vehicle supply equipment or make-ready parking
spaces.
E.
Minimum parking requirements.
(1)
All parking spaces with EVSE and make-ready equipment shall be included in the calculation of minimum required parking spaces, pursuant to Chapter 150 of the Code of the Borough of Brooklawn.
(2)
A parking space prepared with EVSE or make-ready equipment shall
count as at least two parking spaces for the purpose of complying
with a minimum parking space requirement. This shall result in a reduction
of no more than 10% of the total required parking.
(3)
All parking space calculations for EVSE and make-ready equipment
shall be rounded up to the next full parking space.
F.
Reasonable standards for all new EVSE and make-ready parking spaces.
(1)
Location and layout of EVSE and make-ready parking spaces is
expected to vary based on the design and use of the primary parking
area. It is expected flexibility will be required to provide the most
convenient and functional service to users. Standards and criteria
should be considered guidelines, and flexibility should be allowed
when alternatives can better achieve objectives for provision of this
service.
(2)
Installation.
(a)
Installation of EVSE and make-ready parking spaces shall meet
the electrical subcode of the Uniform Construction Code, N.J.A.C.
5:23-3.16.
(b)
Each EVSE or make-ready parking space that is not accessible
for people with disabilities shall be not less than nine feet wide
or 18 feet in length. Exceptions may be made for existing parking
spaces or parking spaces that were part of an application that received
prior site plan approval.
(c)
To the extent practical, the location of accessible parking
spaces for people with disabilities with EVSE and make-ready equipment
shall comply with the general accessibility requirements of the Uniform
Construction Code, N.J.A.C. 5:23, and other applicable accessibility
standards.
(d)
Each EVSE or make-ready parking space that is accessible for
people with disabilities shall comply with the sizing of accessible
parking space requirements in the Uniform Construction Code, N.J.A.C.
5:23, and other applicable accessibility standards.
(3)
EVSE parking.
(a)
Publicly accessible EVSE shall be reserved for parking and charging
electric vehicles only. Electric vehicles shall be connected to the
EVSE.
(b)
Electric vehicles may be parked in any parking space designated
for parking, subject to the restrictions that would apply to any other
vehicle that would park in that space.
(c)
Public parking. Pursuant to N.J.S.A. 40:48-2, publicly accessible EVSE parking spaces shall be monitored by the municipality's Police Department and enforced in the same manner as any other parking. It shall be a violation of this section to park or stand a nonelectric vehicle in such a space, or to park an electric vehicle in such a space when it is not connected to the EVSE. Any nonelectric vehicle parked or standing in an EVSE parking space or any electric vehicle parked and not connected to the EVSE shall be subject to fine and/or impoundment of the offending vehicle as described in § 1-15 of the Code of the Borough of Brooklawn. Signage indicating the penalties for violations shall comply with Subsection F(5) below. Any vehicle parked in such a space shall make the appropriate payment for the space and observe the time limit for the underlying parking area, if applicable.
(d)
Private parking. The use of EVSE shall be monitored by the property
owner or designee.
(4)
Safety.
(a)
Each publicly accessible EVSE shall be located at a parking space that is designated for electric vehicles only and identified by green painted pavement and/or curb markings, a green painted charging pictograph symbol, and appropriate signage pursuant to Subsection F(5) below.
(b)
Where EVSE is installed, adequate site lighting and landscaping
shall be provided in accordance with Brooklawn's ordinances and
regulations.
(c)
Adequate EVSE protection, such as concrete-filled steel bollards,
shall be used for publicly accessible EVSE. Nonmountable curbing may
be used in lieu of bollards if the EVSE is set back a minimum of 24
inches from the face of the curb. Any stand-alone EVSE bollards should
be three feet to four feet high with concrete footings placed to protect
the EVSE from accidental impact and to prevent damage from equipment
used for snow removal.
(d)
EVSE outlets and connector devices shall be no less than 36 inches and no higher than 48 inches from the ground or pavement surface where mounted, and shall contain a cord management system as described in Subsection F(4)(e) below. Equipment mounted on pedestals, lighting posts, bollards, or other devices shall be designated and located as to not impede pedestrian travel, create trip hazards on sidewalks, or impede snow removal.
(e)
Each EVSE shall incorporate a cord management system or method
to minimize the potential for cable entanglement, user injury, or
connector damage. Cords shall be retractable or have a place to hang
the connector and cord a safe and sufficient distance above the ground
or pavement surface. Any cords connecting the charger to a vehicle
shall be configured so that they do not cross a driveway, sidewalk,
or passenger unloading area.
(f)
Where EVSE is provided within a pedestrian circulation area,
such as a sidewalk or other accessible route to a building entrance,
the EVSE shall be located so as not to interfere with accessibility
requirements of the Uniform Construction Code, N.J.A.C. 5:23, and
other applicable accessibility standards.
(g)
Publicly accessible EVSEs shall be maintained in all respects,
including the functioning of the equipment. A twenty-four-hour on-call
contact shall be provided on the equipment for reporting problems
with the equipment or access to it. To allow for maintenance and notification,
Brooklawn shall require the owners/designee of publicly accessible
EVSE to provide information on the EVSE's geographic location,
date of installation, equipment type and model, and owner contact
information.
(5)
Signs.
(a)
Publicly accessible EVSE shall have posted regulatory signs,
as identified in this section, allowing only charging electric vehicles
to park in such spaces. For purposes of this section, "charging" means
that an electric vehicle is parked at an EVSE and is connected to
the EVSE. If time limits or vehicle removal provisions are to be enforced,
regulatory signs including parking restrictions shall be installed
immediately adjacent to, and visible from, the EVSE. For private EVSE,
installation of signs and sign text is at the discretion of the owner.
(b)
All regulatory signs shall comply with visibility, legibility,
size, shape, color, and reflectivity requirements contained within
the Federal Manual on Uniform Traffic Control Devices as published
by the Federal Highway Administration.
(c)
Wayfinding or directional signs, if necessary, shall be permitted at appropriate decision points to effectively guide motorists to the EVSE parking space(s). Wayfinding or directional signage shall be placed in a manner that shall not interfere with any parking space, drive lane, or exit and shall comply with Subsection F(5)(b) above.
(d)
In addition to the signage described above, the following information
shall be available on the EVSE or posted at or adjacent to all publicly
accessible EVSE parking spaces:
[1]
Hour of operations and/or time limits if time limits
or tow-away provisions are to be enforced by the municipality or owner/designee;
[2]
Usage fees and parking fees, if applicable; and
[3]
Contact information (telephone number) for reporting
when the equipment is not operating or other problems.
(6)
Usage fees.
(a)
For publicly accessible municipal EVSE (optional): In addition
to any parking fees, the fee to use parking spaces within the municipality
identified as EVSE spaces shall be $00 for each hour that the electric
vehicle is connected to the EVSE (or per kWh).
(b)
This fee may be amended at any time by a resolution adopted
by the Borough Council of the Borough of Brooklawn.
(c)
Private EVSE. Nothing in this section shall be deemed to preclude
a private owner/designee of an EVSE from collecting a fee for the
use of the EVSE, in accordance with applicable state and federal regulations.
Fees shall be available on the EVSE or posted at or adjacent to the
EVSE parking space.