This district is intended to reserve sites appropriate
for the location of industrial uses with relatively limited environmental
effects. The district is designed to provide appropriate space and
regulations to encourage good quality industrial development, while
assuring that facilities are served with adequate parking and loading
facilities. The LI Limited Industrial District is appropriately used
in areas designated by the Papillion Comprehensive Plan as Mixed Use-2,
business park, and industrial.
[Amended 5-3-2016 by Ord.
No. 1717; 5-3-2016 by Ord. No. 1731; 2-19-2019 by Ord. No. 1817]
|
Regulator
|
All Permitted Uses
| |
|---|---|---|
|
Minimum lot area (square feet)
|
10,000
| |
|
Minimum lot width (feet)
|
50
| |
|
Minimum yards (feet)
| ||
|
Front yard
|
(Note 1)
| |
|
Interior side yard
|
10
| |
|
Street side yard
|
(Note 1)
| |
|
Rear yard
|
10
| |
|
Maximum height (feet)
|
75
| |
|
Maximum building coverage
|
60%
| |
|
Maximum impervious coverage
|
80%
| |
|
Maximum amount of total parking located in street
yard
|
80%
| |
|
Project size requiring large project special
use permit (Note 2)
|
>=30 acres or building area of 400,000 square
feet
| |
|
Minimum depth of landscaping adjacent to street
right-of-way line (feet)
|
10
| |
|
NOTES:
|
|
* Corner lots bordered by two arterial streets
shall maintain full front yard setbacks on both arterials.
|
|
Note 1: Street setbacks. On streets designated
as arterials on the Papillion Comprehensive Plan, required minimum
front and street side yard setbacks are the larger of 25 feet from
the property line or 100 feet from the center line of the street.
On all other streets, required minimum front and street side yard
setbacks shall be 15 feet for streets with curb and gutter and 30
feet for streets without curb and gutter.
|
|
Note 2: Large project special use permit. The large project special use permit requirement applies to projects of sufficient size or scale to require public comment and individual review by the Planning Commission and City Council. All projects that meet or exceed the large project special use permit size threshold shall require approval of a special use permit, following the procedures set forth in § 205-302 of this chapter, unless they are located within and included within the development plans of an MU or PUD District.
|
