This procedure applies to owners, owners representatives, general
contractors, and subcontractors. If a Queen Anne's County licensed
electrician is terminated before finishing a permitted project, the
following procedures shall be followed:
A. A registered letter from the terminating party must be sent to the
permit office within seven days stating the reasons and date of the
termination.
B. A copy of the aforegoing letter shall be sent to the Inspection Authority
and to the County Fire Marshal.
C. The terminated party will need to be present with all parties involved
including all inspectors to do a job inspection before the termination
can be final. The following items shall be noted in the County records:
the percent of work completed, any violations, damaged work and other
matters as may be relevant. In addition, it must be noted that the
work is to be completed by another licensed electrician.
D. After termination is finalized by the County, the replacement licensed electrician shall file a new permit with the County before starting any work. Noncompliance with Subsections
A through
C above will be subject to the penalties set forth in §
11-22 of this chapter. There may be a stop-work order, as provided in Section 115 of the International Building Code placed on the project until compliance is achieved.