A.
Basic limitation. The height of any building or structure shall not exceed 35 feet, or 2 1/2 stories in the case of homes of conventional design, or three stories above the average ground level in the case of split-level design, except that in no case shall the height exceed the limits permitted by Sections 35A to 35D, inclusive, of Chapter 90, and any more restrictive amendments thereto, of the General Laws of Massachusetts.
B.
Height modifications.
[Added 5-18-1999 ATM, Art. 29[1] ]
(1)
Intent. The intent of these modifications is to assure that all structures in Williamstown fit into their surroundings in terms of scale and mass and that viewsheds are maintained.
(2)
Village Business District. In the Village Business District, building height may be increased to 40 feet. For properties fronting on Spring Street, refer to § 70-3.4C(1)(a).
[Amended 5-19-2009 ATM, Art. 32]
(4)
Height increase by special permit. In all districts except Village Business and Rural Residence 1, building height (except one- and two-family dwellings) may be increased to 45 feet, provided that the Board of Appeals grants a special permit, based upon the following criteria, in addition to the general special permit criteria of § 70-8.4:
(a)
Siting. The building will be sited to take advantage of topographic features, such as slopes, which can mitigate its height and bulk.
(b)
Setbacks. The front setback will be no less than the setback of adjacent buildings or the required setback (§ 70-4.3), whichever is greater. Side and rear setbacks will preserve access of adjoining premises to light and air and to allow for landscaping consistent with the standard of Subsection (4)(d).
(c)
Building design. The exterior design will reduce the apparent height and bulk of the building. Design features may include emphasis on architectural elements (such as windows, entries, balconies, etc.) that divide the building into smaller pieces, articulated rooflines, selection of facade material and color. Applicants are required to present plans that demonstrate consistency with this objective.
(d)
Landscaping. Landscaping should reduce the apparent height and bulk of the building. Landscape design will include large trees, singly or in clumps, arranged to break up the mass of the building and provide a more human scale.
(5)
All special permit submittals shall include the following:
(a)
A locus plan, in accordance with the requirements of § 70-8.2B(1).
(b)
Plans showing predevelopment and proposed contours of the land, locations and details of landscaping.
(c)
Plans showing detailed exterior elevations of all proposed buildings.
(d)
A three-dimensional representation of the building, postdevelopment topography and landscaping features of the site and neighboring properties (within 300 feet).
C.
Method of measurement. Height shall be measured as the vertical distance from the average ground elevation around the exterior walls of the structure or, in the case of built up land, the highest elevation at the site prior to such change in contour, to the highest point of the roof surface in the case of a flat roof, and to the mean height between eaves and ridge in the case of a pitched roof.
D.
Exclusions. Limitations of height shall not apply to spires, domes, steeples, radio towers, chimneys, broadcasting and television antennae, bulkheads, cooling towers, ventilators, silos, temporary anemometers used for the collection of wind data to site a wind-generated energy production facility, and other appurtenances usually carried above the roof.
[Amended 5-18-1999 ATM, Art. 29; 5-20-2003 ATM, Art. 25]

