For purpose of this chapter, the Village is hereby divided into 12 use districts, as follows:
A. 
Greenbelt (G).
B. 
Agricultural (AG).
C. 
Residence districts:
(1) 
Low Density Residential (L).
(2) 
Medium Density Residential (M).
(3) 
Multifamily Residential (MF).
D. 
Retail districts:
(1) 
Neighborhood Retail (R).
(2) 
Highway Commercial (HC).
(3) 
Community Retail (CR).
E. 
Professional Office (P).
F. 
Office and industrial districts:
(1) 
Office (O).
(2) 
Office/Industry (OI).
(3) 
Industry (I).
A. 
The boundaries of the use districts shall be as shown upon the map and every section thereof attached to and made a part of this chapter entitled "Village of Islandia, Suffolk County, New York, Zoning Map."[1]
[1]
Editor's Note: The Zoning Map is located in a pocket at the end of the Code.
B. 
The boundaries between use districts are, unless otherwise indicated, either along the boundary lines of various properties and lots or the center lines of streets or railroad rights-of-way or such lines extended or lines parallel thereto. Where figures are shown on the Zoning Map between a street line and a district boundary line, they indicate the distance therefrom equivalent to the number of feet so indicated. When the location of a use district boundary line is not otherwise determined, it shall be determined by the scale of the map measured from a given line; where the street layout actually on the ground varies from the street layouts as shown on the Zoning Map, the designations shown on the mapped street shall be applied in such a way as to carry out the intent and purpose of this chapter for the particular area in question. Lands lying under water shall be considered as being in the same district as the abutting upland for a distance of 100 feet from said upland unless specifically classified and designated otherwise. When property is located in two different zones, it shall meet the higher zoning classification.
[Amended 2-1-1996 by L.L. No. 2-1996]