In R-4 Residence Districts, the regulations contained in this article shall apply.
[Amended 5-14-1990 by Ord. No. 90-21]
A building may be erected and a lot may be used or occupied for any use permitted in R-3 Residence Districts.
Lot area and width. Every lot shall have a lot area of not less than 7,000 square feet, and such lot shall be not less than 55 feet in width at the building line.
Building area. Not more than 30% of the area of each lot may be occupied by buildings.
Front yard. There shall be a front yard on each street on which a lot abuts which shall be not less than 30 feet in depth.
For every single-family detached dwelling, there shall be two side yards, which shall be not less than 30 feet in aggregate width and neither of which shall be less than 12 feet in width.
For every building other than a dwelling and its accessory buildings, there shall be two side yards, neither of which shall be less than 15 feet in width.
Rear yard. For every principal building, there shall be a rear yard which shall be not less than 30 feet in depth.
Maximum impervious surfaces: 40%.
[Added 11-22-1999 by Ord. No. 99-37; amended 7-17-2000 by Ord. No. 2000-19]
Riparian buffer setback: 25 feet.
[Added 12-8-2003 by Ord. No. 2003-22]
No building or structure shall exceed three stories or 35 feet in height, except that no accessory building shall exceed 20 feet in height.
Accessory structures to a use permitted herein shall be located as designated hereunder:
Attached to a principal building, in which case they shall be a part of the principal building.
On the buildable area of a lot but not attached to the principal building, in which case they shall be separated from the principal building by at least 10 feet.
In the rear yard and side yard of a lot, in which case they shall not be closer than three feet from a side or rear property line.
Air-conditioning units shall in all cases be at least seven feet from any property line.