All sketch, preliminary and final plans submitted
for approval or review shall meet the requirements outlined in the
following sections.
All plans submitted shall comply with the following:
A. Plan information. All plans shall contain the following
information:
(1) The name of the record owner.
(2) The name of the subdivider or developer if different
than owner.
(3) The name of the proposed subdivision.
(5) The name of the municipality(ies) in which subdivision
is located.
(6) The municipal boundary lines, if appropriate.
(7) The proposed and existing street and lot layout.
(11)
The name of the designer, registered engineer,
surveyor or planner responsible for the plan. All plans must be sealed
by a professional engineer and/or surveyor in accordance with state
law requirements (optional for sketch plan).
(12)
The names of adjoining owners or subdivisions
of all properties abutting the proposed subdivision.
(13)
All existing watercourses, streams, ponds, lakes,
etc.
(14)
Existing development, including streets and
buildings and natural features within 500 feet of the proposed subdivision.
B. Plan presentation. All plans shall be presented as
follows:
(1) Clear, legible, white print.
(2) On sheets 18 inches by 24 inches or 24 inches by 36
inches (on as many sheets as necessary).
(3) Free from any data or graphics along the edges of
each sheet to provide a border of at least two inches along one short
edge, either the top or the left side, and a border of at least one
inch along the remaining three sides.
(5) Scale not smaller than one inch equals 100 feet, except
for sketch plans.