This work shall consist of the setting of guideposts
in the locations required.
A.
Guides shall be either cedar or treated pine. Treated
posts shall be treated in conformance with the requirements of State
Form 810, Article 10.01-3.
B.
Posts shall be not less than six inches in diameter
at the small end after removal of bark.
C.
Posts shall have a minimum length of 6.5 feet, with
a minimum of 3 1/2 feet buried. The tops shall be beveled 1 5/8
inches. Each post shall have a reflector approved by the Town Engineer.
A.
Guideposts shall be set six feet on centers in holes
dug in thoroughly compact soil. The bottom of the holes shall be thoroughly
rammed so that the posts will have a stable foundation.
B.
Posts shall be set with the front faces two feet from
the street line, with the tops forming a smooth line. The reflectors
shall face the direction of traffic so as to line up with a point
in the middle of the roadway 400 feet back from the post.
