Acetylene generators: to operate an acetylene
generator having a calcium carbide capacity exceeding five pounds.
| |
Automobile tire rebuilding plants: to operate
an automobile tire rebuilding plant.
| |
Automobile wrecking yards: to operate an automobile
wrecking yard.
| |
Bowling establishments: for bowling pin refinishing
and bowling lane resurfacing operations involving the use and application
of flammable or combustible liquids or materials.
| |
Cellulose nitrate motion-picture film: to store,
keep or have on hand more than 25 pounds of cellulose nitrate motion-picture
film.
| |
Cellulose nitrate plastics (pyroxylin):
|
(1)
|
To store, keep or have on hand more than 25
pounds of cellulose nitrate plastics (pyroxylin).
| |
(2)
|
To manufacture articles of cellulose nitrate
plastics (pyroxylin) which shall include the use of cellulose nitrate
plastics (pyroxylin) in the manufacture or assembling of other articles.
|
Combustible fibers: to store, handle or use
combustible fibers in quantities in excess of 100 cubic feet, except
agricultural products on a farm.
| |
Combustible materials: to store combustible
materials including but not limited to empty combustible packing cases,
boxes, barrels or similar containers, rubber tires, baled cotton,
rubber, cork or other similar materials in excess of 2,500 cubic feet
gross volume, on any premises.
| |
Compressed gases:
|
(1)
|
To store, handle or use at normal temperatures
and pressures more than:
| ||
(a)
|
Two thousand cubic feet of flammable compressed
gas; or
| ||
(b)
|
Six thousand cubic feet of nonflammable compressed
gas.
| ||
(2)
|
To store, handle or use any quantity of liquefied
natural or hydrogen gas.
|
Cryogenics: to store, handle or use cryogenic
fluids, except cryogenics used as a motor fuel and stored in motor
vehicle tanks, as follows:
|
(1)
|
Production, sale or storage of cryogenic fluids.
| |
(2)
|
Storage or use of flammable cryogenic fluids,
cryogenic oxidizers or liquefied oxygen in excess of 10 gallons.
|
Dry-cleaning plants: to use in excess of four
gallons of solvents or cleaning agents classified as flammable or
combustible.
| |
Dust-producing plants: to operate any grain
elevator, flour, starch or feed mill, woodworking plant or plant pulverizing
aluminum, coal, cocoa, plastics, magnesium, spices, sugar, sulfur
or other materials producing explosive-potential dust.
| |
Explosive ammunition and blasting agents:
|
(1)
|
To manufacture, possess, store, sell or otherwise
dispose of explosives and blasting agents.
| |
(2)
|
To use explosives or blasting agents.[2]
| |
(3)
|
To operate a terminal for handling explosives
or blasting agents.
|
Flammable and combustible liquids:
|
(1)
|
To store, handle or use flammable liquids in
excess of 61/2 gallons inside dwellings; or in excess of 10 gallons
inside any other building or other occupancy; or in excess of 60 gallons
outside of any building. This provision shall not apply to:
| ||
(a)
|
Liquids in the fuel tank of a motor vehicle,
aircraft, portable or stationary engine, boat or portable heating
plant.
| ||
(b)
|
Paints, oils, varnishes or similar flammable
mixtures, when such liquids are stored for maintenance, painting or
similar purposes.
| ||
(2)
|
To store, handle or use combustible liquids
in excess of 25 gallons inside a building, or in excess of 60 gallons
outside of any building. This provision shall not apply to fuel oil
used in connection with oil-burning equipment.
| ||
(3)
|
A permit shall be obtained for the initial installation
of an oil burner and a fuel oil tank used in connection therewith.
A permit shall be required for the replacement of a fuel oil tank
connected to an oil burner.
| ||
(4)
|
For processing, blending or refining of flammable
or combustible liquids.
|
Flammable finishing: for spraying, coating or
dipping operations utilizing flammable or combustible liquids.
| |
Fruit ripening process: to conduct a fruit ripening
process using ethylene gas.
| |
Fumigation and thermal insecticidal fogging:
to conduct fumigation or thermal insecticidal fogging operations.
| |
Hazardous chemicals:
|
(1)
|
To store, handle or use more than 55 gallons
of corrosive liquids; or more than 50 pounds of oxidizing materials;
or more than 10 pounds of organic peroxides; or more than 50 pounds
of nitromethane; or 1,000 pounds or more of ammonium nitrate, ammonium
nitrate fertilizers and fertilizer mixtures containing 60% or more
ammonium or any amount of toxic material or poisonous gas.
| |
(2)
|
To store, handle or use any quantity of air-reactive,
water-reactive or unstable materials.
|
Liquefied petroleum gas: for each installation
of liquefied petroleum gas employing a container or an aggregate of
interconnected containers of 500 gallons or more water capacity, and
for each permanent installation, irrespective of size of containers,
made at buildings in which 20 or more persons congregate for civic,
political, educational, religious, social or recreational purposes.
Installers shall maintain a record of all installations and replacement
of portable cylinders, and have it available for inspection.
| |
Lumberyards: to operate a lumberyard.
| |
Magnesium: for melting, casting, heat treating,
machining or grinding of more than 10 pounds of magnesium per working
day.
| |
Matches:
|
(1)
|
To manufacture matches.
| |
(2)
|
To store matches in excess of 25 cases. (Note:
One case equals one matchman's gross of 14,400 matches.)
|
Organic coatings: to perform organic coating
operations utilizing more than one gallon of organic coating on any
working day.
| |
Ovens and furnaces: to operate industrial processing
ovens and furnaces operating at approximately atmospheric pressures
and temperatures not exceeding 1,400° F. which are heated with
oil or gas fuel or which during operation contain flammable vapors
from the material in the oven or the catalytic combustion system.
| |
Places of assembly: to maintain, operate or
use a place of assembly._
| |
Service stations and repair garages: to operate
a service station or repair garage.
| |
Welding and cutting: to operate a welding and
cutting business. A record of all locations where welding or cutting
operations are performed shall be maintained and kept available for
inspection by the permit holder.
|