The Department shall sell to each customer supplied
with water a suitable water meter. The customer (owner) shall be responsible
for installation of the water meter and all required appurtenances
to be in conformance with this chapter and all other applicable regulations.
Water meters shall be maintained by the Department
so far as ordinary wear and tear are concerned, but damages due to
freezing or external causes shall be paid for by the customer.
The charge for the reinstallation or changing of a water meter, when removed because damaged in any way, due to negligence of the customer, shall be as set forth in Chapter
169, Fee Schedule, per occurrence.
Stop or gate valves shall be placed on both
sides of the water meter, with a pressure-reducing valve installed
between the stop or gate valve and the water meter on the street side
of the water meter. The pressure-reducing valve shall be set to a
maximum of 75 psi.
The accuracy of the water meter on any premises will be tested by the Department upon written request of the owner, who shall pay in advance a fee as set forth in Chapter
169, Fee Schedule, to cover the cost of the test. If, upon such test, the meter shall be found to register over 3% more water than actually passes through it, another meter will be substituted and the fee will be repaid to the owner, and the water bill for the current quarter shall be adjusted in such manner as will be fair and just.
Where water is furnished by a water meter, the
quantity recorded by it shall be taken to be the amount passing the
meter, except where the meter has been found to be registering inaccurately
or has ceased to register. In such cases, the quantity may be determined
by the average registration of the meter when in order, or by such
fair and reasonable method as shall be based upon the best information
obtainable.