A. 
The Borough of Teterboro shall be divided into the following districts, the location of which shall be determined by reference to the Official Zoning Map,[1] with all notations and attached boundary descriptions, if any, filed in the office of the Borough Clerk, which is hereby adopted and made a part hereof.
[1]
Editor's Note: The Zoning Map is located in a pocket at the end of this Code.
B. 
The zones shall be:
(1) 
Zone R: Low Density Residential.[2]
[2]
Editor's Note: This zone is also subject to the provisions of Ord. No. 379, adopted 6-30-1997, which is included in Appendix A at the end of this chapter.
(2) 
Zone I: Light Industrial and Distribution Zone.
(3) 
Zone A: Airport Facilities Zone.
(4) 
Zone RM: Medium Density Residential Zone.
[Added 8-25-1999 by Ord. No. 409]
A. 
Application. All structures and the moving, reconstruction, addition to, remodeling and change in occupancy (except for residential dwelling units) or use of such structures and the improvement of all land shall comply with the applicable regulations of Article IV or V of these regulations.
B. 
Exemptions. The following, except as otherwise provided, shall be exempt from these regulations:
(1) 
Maintenance and repair work on railroad tracks, signals, bridges and similar facilities and equipment located in a railroad right-of-way.
All streets, roads, highways, alleys, public ways and railroad rights-of-way, if not otherwise specifically designated, shall be deemed to be in the same district as the property immediately abutting upon the same. Where the center line of a street, road, highway, alley, public way or railroad right-of-way serves as a district boundary, the zoning of such areas, unless otherwise specifically designated, shall be deemed to be the same as that of the abutting property up to such center line.