[HISTORY: Adopted by the Town Board of the Town of Minden 5-1-1986 by L.L. No. 1-1986. Amendments noted where applicable.]
GENERAL REFERENCES
Fire prevention and building construction — See Ch. 50.
Flood damage prevention — See Ch. 54.
The Town of Minden, by enactment of Local Law No. 1 of the year 1986, has provided for enforcement of the New York State Uniform Fire Prevention and Building Code and, recognizing that said code in Parts 850 and 1030.1 provides minimum parameters for the design, installation and location of electrical wiring, systems and equipment operating on 50 volts or more, wishes to more fully implement the aforesaid provisions and facilitate enforcement of the same.
All electrical installations heretofore mentioned shall be made in conformity with the requirements of the National Electrical Code except when the provisions of this chapter or any other local law, ordinance or Building Code of the town provides otherwise, in which event compliance with the provisions of such local law, ordinance or Building Code shall be recognized as proper compliance with this chapter. The requirements of the National Electrical Code shall be those known as "National Fire Protection Association Pamphlet #70," as approved and adopted by the American Standards Association.
A. 
The Code Enforcement Officer of the Town of Minden shall be and is hereby authorized to appoint and deputize as agents of the Town of Minden for the purpose of making inspections and reinspections at reasonable times and places, and upon reasonable notice, of all electrical installations regulated and covered by the New York State Uniform Fire Prevention and Building Code, and to approve or disapprove said installations, such persons, agencies or organizations as, in the opinion and discretion of the Code Enforcement Officer, shall be qualified to conduct the same. In no event shall the cost or expense of such inspections or reinspections be a charge against the Town of Minden.
B. 
It shall be the duty of such person, organization or agency duly appointed and deputized as provided in this chapter to report in writing to the Code Enforcement Officer of the Town of Minden all violations of or deviations from the provisions of the National Electrical Code, and of all local laws and the Building Code insofar as any of the same shall apply to electrical wiring, systems and equipment covered by this chapter. Such deputized inspector shall make inspections of electrical installations in and on properties in the Town of Minden upon the written request of the Town of Minden Code Enforcement Officer.
C. 
It shall be the duty of such appointed and deputized electrical inspector to issue a certificate of compliance only when electrical installations and equipment are found to be in conformity with the provisions of the National Electrical Code and this chapter. He shall direct that a copy of the certificate of compliance or the official denial thereof be sent to the Code Enforcement Officer of the Town of Minden.[1]
[1]
Editor's Note: Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. I).
A. 
Any installation or alteration of an electrical system or electrical wiring that is covered and regulated by the provisions of the New York State Uniform Fire Prevention and Building Code, the National Electrical Code or a local law of the Town of Minden without the issuance of a certificate of compliance as hereinabove provided shall be a violation of this chapter.
B. 
Any person, firm or corporation who or which shall violate the provisions of this chapter shall be subject to all penalties and remedies provided by Article 18 of the Executive Law of the State of New York as the same pertains to violations of the New York Uniform Fire Prevention and Building Code.
The provisions of this chapter shall not apply to the electrical installations in mines, ships, railway cars, automotive equipment or the installations or equipment employed by railway, electrical or communication utilities in the exercise of its function as a utility, and located outdoors or in buildings used exclusively for that purpose. This chapter shall not apply to any work involved in the manufacture, assembly, test or repair of electrical machinery, apparatus, materials and equipment by a person, firm or corporation engaged in electrical manufacturing as their principal business. It shall not apply to any building which is owned or leased in its entirety by the government of the United States of America or the State of New York.
This chapter shall not be construed to relieve from or lessen the liability of any person owning, operating, controlling or installing any electrical wiring, devices, appliances or equipment for loss of life or damage to person or property caused by any defect therein, nor shall the Town of Minden, its Code Enforcement Officer or the deputized electrical inspector be deemed to have assumed any such liability by reason of any inspection made pursuant to this chapter.